DROPS Super Sale - SAVE 30% on 6 cotton yarns all July!

Other

Categories
Videos: 39
1:16
Cast on - with loops

This is a simple cast on alternative that is easy for beginners. This is also how we cast on new sts at the side of the work e.g. when we are knitting a front piece and sleeves in one, and cast on new sts each side for the sleeves.
3:18
Double Pointed Needles - Cast on / Stockinette

This is how you cast on and knit in stockinette on double pointed needles. Knit all sts in the round.
5:47
Cast on -Tubular

Makes flexible and elastic edges perfect for the edge on a ribbed top down sock, ribbed cuff edges etc. The white thread we use are waste yarn that we pull out later. After casting on, the sts with the white thread around are P sts. Knit the K sts, and lift the P sts with yarn in front of work. After 4 rows (more if thinner yarn) you pull out the waste yarn and continue in rib, now working both K and P sts.
5:08
Cast on - Tubular with waste yarn

Makes flexible and elastic edges perfect for the edge on a ribbed top down sock, ribbed cuff edges etc. Cast on half the number of sts the pattern call for and work a couple of rows with waste yarn, ending with a RS row. Change to working yarn and work stockinette starting on a WS row. Work a minimum of 4 rows, if thinner yarn work 6 or 8 rows, end with a RS row. Next row: P1, pick up the yarn in first st below on left needle and K the stitch, P1, repeat pick up and K, continue until end of row. Now cut and remove waste yarn. Continue in rib K1, P1.
2:05
Cast on - Cable

...aka knitted cast on. Great way to cast on when you want a firm nice edge. Also a nice method when casting on new sts at the end of a row.
4:34
Cast on - chain provisional

This method of crochet chains at the bottom of your work let you create live loops that can be picked up afterward and be worked down, e.g. cuffs, lace borders etc. Use a crochet hook and crochet sts upon a needle. Start with a slip knot. After required sts are on the needle, don't pass the last loop onto the needle but chain a couple of extra sts and then pull loop a bit long through last stitch. This is the thread you will pull later to unzip the crochet sts.
4:17
Cast on from chain row

By having a chain row at the bottom of your work you can create live loops that can be picked up afterward and be worked down, e.g. cuffs, lace borders etc. Chain the number of sts needed and add a few extra. Turn the chain row so that you have the back side with the bumps up. Pick up sts with your working yarn through each bump. Afterward you can easily pull out the chains to unzip the sts and put them back on needle.
5:36
Cast on provisional w/wasteyarn or circular

The video is showing two ways to make a provisional cast on where you afterward will have live sts to work the opposite way. First we are casting on using a waste yarn, then we are casting on around the cable of a circular needle. When using the circular needle you can easily afterward just pull the needle through to knit position and start working the sts for a hem, cuff, border etc.
7:03
Cast on invisible -

This is a cast on method great for toe up socks, mittens, and other projects worked in the round where you don't want an uneven and bulky seam. Cast on sts on two double pointed needles and work one needle at the time in the round. After cast on and one row on each needle (i.e. 1 round) start inc 1 st each side of both needles on every other round to as many needed for width of foot. After a couple of rounds divide the sts on 4 dpn's and keep working in the round.
2:28
Cast on with a circle

Here we show how to cast on with a circle without getting a hole in the middle. To see a pattern where you can use this technique, see: DROPS Extra 0-932 or one of the pictures to the left.
3:22
How to cast on using a crochet hook and a knitting needle

In this DROPS video we show you how to cast on using a crochet hook and a knitting needle to get a nice edge. Make a start loop with the crochet hook, place the crochet hook and knitting needle next to each other. * Put the thread behind the knitting needle, get the thread on front with the crochet hook and pull it through the loop on the crochet hook *. Repeat * - * to the desired stitch numbers - 1. Put the thread behind the knitting needle and put the stitch on the crochet hook to the knitting needle. Now work stockinette st. The yarn we use in the video is DROPS Snow.
4:07
Cast on new sts at side of work

The video is showing two techniques of casting on new sts at the side of your work e.g. when we are knitting a front piece and sleeves in one, and cast on new sts each side for the sleeves. First we cast on with loops, which is the easiest. It creates a loose edge which is ok if it will be seamed afterward like a sleeve seam. The next method is cable cast on also called knitted cast on, which is a great way when you want a firm nice edge.
4:44
Cast on -Turkish aka Eastern

A very useful invisible cast on technique for toe up socks, pillow cases, bags etc. Wrap the working yarn loose around two needles, hold on to the tail. Start knitting the sts on the upper needle, then turn work around and knit sts on the other needle, continue working each needle and in the round. If it's a toe on a sock you will start to inc on 2nd round by inc 1 st each side of each needle on every or every other round until enough sts for width of foot.
5:40
Cast on in Rib

A stretchy cast on which is good for ribbing, we show a K2/P2 rib in video but also great for K1/P1 rib. Perfect for edges on socks, mittens, hats or whenever you want very stretchy cast on. Even if you will be working in the round it's a good idea to cast onto a straight needle and then transfer the sts to double pointed needles.
1:55
Cast on with 2 colors

This cast on method reminds on a long tail cast on, but instead you work with 2 strands in different colors. Start with a slipknot holding the strands double, this one is later removed, so that all sts cast on are all with 1 strand of the yarn. To cast on with 2 colors is a great start on a 2-colored work, like intarsia, fair-isle patterns, stripes or twined knitting.
1:49
Cast on with 3 colors

Similar cast on technique as you use on a long tail cast on, but here we are working with 3 strands in different colors. First make a slipknot to hold all three strands together (the slipknot is untied when finished cast on). We will use one color as the edging and this strand goes around the thumb, and the other 2 colors will be alternated in the new sts as shown in video. Perfect start on a diagonal striped piece, like a cuff or hem, on a fair isle pattern that starts immediately after cast on, or for twined knitting.
1:59
Cast on 2 colors alternating

Similar cast on technique as you use on a long tail cast on, but here we are holding two strands in different colors together. First make a slipknot to hold them together (the slipknot is untied when finished cast on), then pick up the sts alternating from the front strand, and from the back strand as shown in video. Perfect start on a diagonal striped piece, like a cuff or hem.
6:18
Cast on with 2 circle needles

In this DROPS video we show how you can cast on with 2 circle needles, and then be able to knit their separate ways. To see a pattern where you can use this technique, instead of sewing the two parts together with grafting/kitchener stitches, go to: DROPS Extra 0-1109
2:17
How to cast on with 2 circular needles to get a looser cast on edge

In this DROPS video we show how you can cast on with two circular needles. We sometimes recommend this in our patterns to prevent the cast on edge being too tight. When you have cast on the required number of stitches, you pull out one circular needle and start to knit. In this video, we cast on with needle 7 and 8 = US 10,75 and US 11, and it is needle 8 = US 10,75 that we pull out. We use the yarn DROPS Snow in the video. You will find patterns where this technique can be used by clicking on the pictures below.
6:55
Double Knitting: invisible cast on

Cast on this way with two colors alternating for an invisible start on your double knitted piece. The starting slipknot will be dropped after a couple rows and is not to be included in the number of stitches to be cast on. You cast on for both sides at the same time, and the stitches alternately belongs to front and back side of work. Make sure to cast on an even number of stitches, so that you will have the same amount of sts in the front and in the back. When working first row make sure strands are twisted to secure first stitch. Make sure to knit the knit stitches and purl the purl stitches as shown in our Drops Video.
8:14
Double Knitting: two color cast on

Cast on this way with two colors alternating to start your double knitted piece. The starting slipknot will be dropped after a couple rows and is not to be included in the number of stitches to be cast on. You cast on for both sides at the same time, and the stitches alternately belongs to front and back side of work. Make sure to cast on an even number of stitches, so that you will have the same amount of sts in the front and in the back. When working first row make sure strands are twisted to secure first stitch. Make sure to knit the knit stitches and purl the purl stitches as shown in our Drops Video.
5:28
How to cast on and bind off with double threads

In this DROPS video we show how to cast on and how to bind off with double yarn. In some of our patterns it is described that one should both cast on and bind off with double threads. We do this to get a nicer ending / a little more weight on the garment / more elastic / slightly loosely bind off, but everything depends on which yarn you work with. We use the yarn DROPS Snow in the video. You’ll find a pattern where you can use this technique by clicking on the picture below.
9:59
Braided edge

In this DROPS video we show you how to work a braided edge. A braided edge is worked best in the round. We first cast on an even number of stitches with 2 different colors. And then we remove the loop from the beginning of the needle and place a marker before we knit the first round. We knit the colors alternately. The next two rounds are purled and remember to work the stitches in the same color as the round below. When you purl the first round put your working yarn to the right up and over the needle, and when you purl the second round put the working yarn down to the left.
3:36
How to work an easy picot edge

In this DROPS video we show how to work an easy picot edge. We work back and forth, but you can also work it in the round. Work like this on row 1: * Knit 7 stitches, slip 2nd stitch on right needle over outermost stitch on right needle (over the last stitch worked), pass next stitch on right needle over outermost stitch on right needle (2 stitches decreased = 1 arch) *, work from *-* the entire row. We use the yarn DROPS Snow in the video. You must read a pattern to get the correct number of stitches. You’ll find a pattern with a picot edge like this by clicking on the picture below.