DROPS Children 49 · Lots of new kid designs!

Cast on in Rib

A stretchy cast on which is good for ribbing, we show a K2/P2 rib in video but also great for K1/P1 rib.
Perfect for edges on socks, mittens, hats or whenever you want very stretchy cast on.
Even if you will be working in the round it's a good idea to cast onto a straight needle and then transfer the sts to double pointed needles.

Patterns using this technique

DROPS 254-22

DROPS 254-22
DROPS 255-4

DROPS 255-4
Change language:

Video #229, listed in: Learn to knit, Cast on, Other

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Mirjam wrote:

Precies wat ik nodig had voor een mouwboordje met een onregelmatig recht/averecht patroon. Makkelijk onder de knie te krijgen en het resultaat is super elastisch. Dank!

27.12.2024 - 13:46

Country flag Sylvie wrote:

Dans le vidéo, vous parlez de lire les instructions pour suivre la vidéo mais... j’ai beau chercher, je ne trouve malheureusement nulle part d’instruction écrite . Aidez-moi svp 🙃 Sylvie

03.01.2019 - 08:32

DROPS Design :

Bonjour Sylvie, on fait ici référence aux explications du modèle, pour rabattre en côtes, vous tricotez les mailles comme elles se présentent et les rabattez en même temps, ce qui peut être, en fonction du modèle des côtes 1/1, 2/2 etc... Bon tricot!

03.01.2019 - 08:49

Country flag Frau Kely wrote:

Danke für diese Superanleitung! Wenn man es endlich erfasst hat, funktioniert der Maschenanschlag sehr gut. Falls man viele Maschen benötigt, kann man sehr gut als 2 . Nadel zur Rundstricknadel eine kurze aus einem Spiel verwenden.

17.02.2018 - 16:24

Country flag Ktn wrote:

Thanks, DROPS just what I was looking for!

07.10.2017 - 16:50

Country flag Carolien Rademakers wrote:

Bij deze opzet heb je altijd een oneven aantal steken. Als je begint met een schuiflus, en je zorgt dat je deze aan het draadje wat blijft hangen weer uit kan trekken, is dat probleem opgelost. Als je rond gaat breien kun je ook de eerste en laatste steek samenbreien, heb je ook meteen de ronde gesloten én die ene steek geminderd. Bij het rondbreien kun je lastig zien of je de steken niet gedraaid op de pen hebt staan, brei dan eerst 1 pen terug en pas daarna de steken in het rond.

08.09.2017 - 08:31

Country flag Carolien R wrote:

Prachtige opzet en erg rekbaar. Alleen 1 vraag: je maakt de opzetlus, steek 1, daarna komen er altijd twee steken bij dus je eindigt altijd met een oneven aantal steken. Hoe pas je dit aan als je twee r twee av wilt breien?

28.07.2017 - 12:30

DROPS Design :

Hallo Carolien, Om het stekenaantaal aan te passen naar een even aantal steken, kun je op het eind op de gebruikelijke wijze nog een steek er bij op zetten.

28.08.2017 - 13:02

Country flag Nina De Weerd wrote:

When I knit a sweater i always cast in the traditional way and then 1/1 but there is never a lot of elasticity at the border 1/1 . Could this method of casting in stiches improve the elasticity ? Thanks

22.04.2016 - 16:16

DROPS Design :

Dear Mrs De Weerd, It would sure, you can always make a small swatch to check how it will look before starting a larger piece. Happy knitting!

22.04.2016 - 17:56

Country flag Grace Wong wrote:

How to extend this 2x2 ribbing cast on method if I need 1 stitch at two sides for selvage stitch or 1 stitch at one side for selvage stitch?

01.04.2016 - 15:49

DROPS Design :

Dear Mrs Wong, you can then cast on these additional edge sts using traditionnal way. Happy knitting!

01.04.2016 - 16:18

Country flag Veerle wrote:

Moet je de laatste steel altijd laten vallen ? Of alleen als het aantal niet klop !

16.03.2016 - 14:26

DROPS Design :

Hoi Veerle. Niet zo veer ik weet

23.03.2016 - 14:48

Country flag Carolien wrote:

Ik zie geen verschil in de opzetwijze van de rechte en averechte steken?

14.02.2016 - 08:00

DROPS Design :

Hoi Carolien. Er is geen verschil in hoe wij opzetten voor een r of av, maar deze opzetsteek is geschikt voor boordsteek.

16.02.2016 - 10:30

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to cast on with 2 circular needles to get a looser cast on edge
2:17
How to cast on with 2 circular needles to get a looser cast on edge

In this DROPS video we show how you can cast on with two circular needles. We sometimes recommend this in our patterns to prevent the cast on edge being too tight. When you have cast on the required number of stitches, you pull out one circular needle and start to knit. In this video, we cast on with needle 7 and 8 = US 10,75 and US 11, and it is needle 8 = US 10,75 that we pull out. We use the yarn DROPS Snow in the video. You will find patterns where this technique can be used by clicking on the pictures below.
Video thumbnail for How to work stitches together to get a wavy edge
5:49
How to work stitches together to get a wavy edge

In this DROPS video we show how to work a wavy neck edge after chart, like the ones in DROPS 232-43 and 232-44. We have already cast on and knit 1 row from the wrong side. We work with the yarn DROPS Snow. You must read a pattern with this technique and look at the chart to be able to follow this video properly. You’ll find a pattern by clicking on the pictures below.
Video thumbnail for How to start a sock with a flounce
3:51
How to start a sock with a flounce

In this DROPS video we show how to start a sock with a flounce, like the “Dainty Duo” socks in DROPS 229-19. We cast on with 2 strands, but continue with 1 strand. Then we knit 4 rounds and on the next round we knit all stitches together 2 by 2. Then we work a rib (knit 1 twisted/purl 1). These socks are worked in DROPS Fabel, but in the video, we work with a thicker yarn; DROPS Snow. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work an easy picot edge
3:36
How to work an easy picot edge

In this DROPS video we show how to work an easy picot edge. We work back and forth, but you can also work it in the round. Work like this on row 1: * Knit 7 stitches, slip 2nd stitch on right needle over outermost stitch on right needle (over the last stitch worked), pass next stitch on right needle over outermost stitch on right needle (2 stitches decreased = 1 arch) *, work from *-* the entire row. We use the yarn DROPS Snow in the video. You must read a pattern to get the correct number of stitches. You’ll find a pattern with a picot edge like this by clicking on the picture below.
Video thumbnail for How to work an easy flounce
5:09
How to work an easy flounce

In this DROPS video we show how we work an easy flounce, like the one used in the «White Pine» socks in DROPS 229-28. We have already cast on stitches and knitted 2 rounds and in the video, we work like this/ we show the beginning of the rounds: Round 1: Knit 2, knit 2 sts together. Round 2: Knit. Round 3: Knit 2 and 2 sts together. Round 4: Knit. Round 5: Purl. Round 6: Knit: Then work a rib (knit 1, purl 1) for a few cm/inches. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find with this flounce in a pattern by clicking on the picture below.
Video thumbnail for How to start working a rolling-edge
5:31
How to start working a rolling-edge

In this DROPS video we show to start working a rolling-edge, like the one in DROPS 230-49 and DROPS 230-50. We have already worked 3 ridges (1 ridge = knit 2 rows) and start the video like this: 1 edge stitch in garter stitch, knit 3, * twist the stitches on the right needle 360 degrees as follows: Take the strand to the right side and take the right needle under the piece and up to the right side, knit 6 *, work from *-* until there are 4 stitches left, knit 3 and 1 edge stitch in garter stitch. Now join the piece and continue in the round. We use the yarn DROPS Snow in the video. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.