DROPS Karisma
DROPS Karisma
100% Wool
from 3.00 $ /50g
Get the yarn to make this pattern from 54.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

December Carnival

Knitted sweater in DROPS Karisma. The piece is worked top down with round yoke, Nordic pattern and double neck. Sizes XS - XXL.

Highlight Size:
DROPS 245-5
DROPS Design: Pattern u-962
Yarn group B
-------------------------------------------------------

SIZES:
XS - S - M - L - XL – XXL

Finished measurements:
Chest measurements: 94-100-108-118-132-142 cm = 37"-39⅜"-42½"-46½"-52"-55¾"
Full length: 54-56-58-60-62-64 cm = 21¼"-22"-22¾"-23⅝"-24⅜"-25¼"
All measurements in charts are in cm.

YARN:
DROPS KARISMA from Garnstudio (belongs to yarn group B)
150-150-150-200-200-200 g color 50, sea green
50-50-50-50-100-100 g color 80, rose
50-50-50-50-100-100 g color 84, desert rose
50-50-50-50-100-100 g color 55, light beige brown
50-50-50-50-50-50 g color 04, chocolate brown
50-50-50-50-50-50 g color 11, orange
50-50-50-50-50-50 g color 21, medium grey
50-50-50-50-50-50 g color 37, dark grey blue
50-50-50-50-50-50 g color 39, dark old rose
50-50-50-50-50-50 g color 45, light olive
50-50-50-50-50-50 g color 48, wine red
50-50-50-50-50-50 g color 52, dark mustard
50-50-50-50-50-50 g color 69, light grey green
50-50-50-50-50-50 g color 73, petrol
50-50-50-50-50-50 g color 76, dark purple
50-50-50-50-50-50 g color 82, maroon

NEEDLES:
DROPS CIRCULAR NEEDLES SIZE 4 MM = US 6: Length 40 cm = 16" and 80 cm = 32".
DROPS CIRCULAR NEEDLES SIZE 3 MM = US 2.5: Length 40 cm = 16" and 80 cm = 32".
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM = US 2.5.
The technique MAGIC LOOP can be used – you then only need 80 cm = 32" circular needle in each size.

KNITTING GAUGE:
21 stitches in width and 28 rows in height with stockinette stitch and Nordic pattern = 10 x 10 cm = 4" x 4".
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4", change to a larger needle size. If you get too few stitches on 10 cm = 4", change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Karisma
DROPS Karisma
100% Wool
from 3.00 $ /50g
Get the yarn to make this pattern from 54.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------

PATTERN:
See diagrams A.1 to A.4. Choose diagram for your size (applies to A.1). The whole pattern is worked in stockinette stitch.

KNITTING TIP:
To avoid the knitting gauge losing its elasticity when working pattern it is important that the strands at the back are not tight. Use a size larger needle when working pattern if the piece becomes tight.

DECREASE TIP (for sleeves):
Decrease 1 stitch on each side of the marker-thread as follows: Work until there are 3 stitches left before the marker-thread, knit 2 together, knit 2 (marker-thread sits between these 2 stitches), slip 1 stitch knit-wise, knit 1 and pass the slipped stitch over the knitted stitch (2 stitches decreased).

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, from mid back and top down. The yoke is divided for body and sleeves and the body is continued in the round with circular needle. The sleeves are worked in the round with short circular needle/double pointed needles.

DOUBLE NECK:
Cast on 96-100-104-108-112-116 stitches with circular needle size 4 MM = US 6 and color sea green DROPS Karisma. Change to circular needle size 3 MM = US 2.5 and knit 1 round. Then work rib in the round (knit 2, purl 2) for 10 cm = 4".
Change to circular needle size 4 MM = US 6. Knit 1 round and increase 24-28-32-36-36-36 stitches evenly spaced = 120-128-136-144-148-152 stitches. Knit 1 round.
Insert 1 marker at the beginning of the round - mid-back; the yoke is measured from this marker.

YOKE:
Read KNITTING TIP and work A.1 in the round (30-32-34-36-37-38 repeats of 4 stitches). REMEMBER THE KNITTING GAUGE!
AT THE SAME TIME, on each row marker with an arrow in A.1, increase as follows:
Arrow-1: Increase 44-44-44-52-52-56 stitches evenly spaced = 164-172-180-196-200-208 stitches.
Arrow-2: Increase 40-40-44-48-52-52 stitches evenly spaced = 204-212-224-244-252-260 stitches.
Arrow-3: Increase 36-36-40-44-48-48 stitches evenly spaced = 240-248-264-288-300-308 stitches.
Arrow-4: Increase 0-8-8-16-20-28 stitches evenly spaced = 240-256-272-304-320-336 stitches.
Arrow-5: Increase 24-28-28-24-28-32 stitches evenly spaced = 264-284-300-328-348-368 stitches.
Arrow-6: Increase 16-16-20-20-20-24 stitches evenly spaced = 280-300-320-348-368-392 stitches.
Arrow-7: Increase 12-12-12-16-16-20 stitches evenly spaced = 292-312-332-364-384-412 stitches.
Arrow-8: Increase 8-12-8-12-12-16 stitches evenly spaced = 300-324-340-376-396-428 stitches.

When the yoke measures 20-22-24-26-28-30 cm = 8"-8¾"-9½"-10¼"-11"-11¾" from the marker, divide for body and sleeves as explained below, AT THE SAME TIME, when A.1 is finished, work A.2.
Divide yoke for body and piece as follows: Work 45-49-51-56-61-67 stitches as before (half back piece), place the next 60-64-68-76-76-80 stitches on 1 thread for the sleeve, cast on 8-8-12-12-16-16 stitches (in side under sleeve), work 90-98-102-112-122-134 stitches as before (front piece), place the next 60-64-68-76-76-80 stitches on 1 thread for the sleeve, cast on 8-8-12-12-16-16 stitches (in side under sleeve), work the remaining 45-49-51-56-61-67 stitches as before (half back piece). Cut the strand. The body and sleeves are finished separately. The piece is now measured from here.

BODY:
= 196-212-228-248-276-300 stitches. Insert 1 marker-thread in the middle of the 8-8-12-12-16-16 stitches under 1 sleeve. Start at the marker-thread and continue A.2 in the round (continuing from where the yoke finished). When A.2 is finished, work A.3 until the body measures 27 cm = 10⅝" from the division (approx. 4 cm = 1½" left) – finish after a whole stripe. If you have not reached the correct length, work A.X to desired length.
Change to circular needle size 3 MM = US 2.5 and color sea green. Knit 1 round and increase 40-40-44-52-56-60 stitches evenly spaced = 236-252-272-300-332-360 stitches.
Work rib (knit 2, purl 2) for 4 cm = 1½". Bind off with rib. The sweater measures approx. 54-56-58-60-62-64 cm = 21¼"-22"-22¾"-23⅝"-24⅜"-25¼" from the shoulder.

SLEEVES:
Place the 60-64-68-76-76-80 stitches from the thread on one side of the piece on short circular needle/double pointed needles size 4 MM = US 6 and knit up 1 stitch in each of the 8-8-12-12-16-16 cast-on stitches under the sleeve = 68-72-80-88-92-96 stitches.
Insert 1 marker-thread in the middle of the new stitches under the sleeve and allow it to follow your work onwards; it is used when decreasing under the sleeve. Start at the marker-thread and continue A.2 in the round (continuing from where the yoke finished).
Read the next section before continuing!
After A.2 work A.4 to finished length. AT THE SAME TIME, when the sleeve measures approx. 4-4-4-2-2-2 cm = 1½"-1½"-1½"-¾"-¾"-¾" from the division, decrease 2 stitches under the sleeve – read DECREASE TIP. Decrease like this every 3-3-2-1½-1½-1½ cm = 1⅛"-1⅛"-¾"-½"-½"-½" a total of 12-12-16-18-20-20 times = 44-48-48-52-52-56 stitches. Continue working until the sleeve measures 40-39-37-36-34-33 cm = 15¾"-15¼"-14½"-14¼"-13⅜"-13", adjusting to finish after a whole stripe (approx. 4 cm = 1½" left)
Change to double pointed needles size 3 MM = US 2.5. Knit 1 round and increase 4-4-4-8-8-8 stitches evenly spaced = 48-52-52-60-60-64 stitches. Work rib (knit 2, purl 2) for 4 cm = 1½". Bind off with rib. The sleeve measures approx. 44-43-41-40-38-37 cm = 17¼"-17"-16⅛"-15¾"-15"-14½" from the division. Work the other sleeve in the same way.

ASSEMBLY:
Fold the neck double to the inside and sew down. To avoid the neck being tight and rolling outwards, it is important that the seam is elastic.

Diagram

All measurements in charts are in cm.

symbols = rose
symbols = desert rose
symbols = orange
symbols = sea green
symbols = dark purple
symbols = dark old rose
symbols = light beige brown
symbols = light olive
symbols = dark mustard
symbols = light grey green
symbols = chocolate brown
symbols = medium grey
symbols = wine red
symbols = dark grey blue
symbols = petrol
symbols = maroon
symbols = increase-round
symbols = Arrow applies to sleeve. When you have worked as far as arrow, work A.4 to finished length.
diagram
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.  

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 245-5

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (26)

country flag Alice wrote:

Die Anleitung kann man leider nicht Speicher, die Datei ist beschädigt. schade

30.05.2024 - 20:41

country flag Sandkasse wrote:

Jeg har brugt 800 gram (færdig vægt) til str XXL\\r\\nJeg måtte trævle den nederste kant op, da den flaner når man strikker den med de ekstra masker. Den blev pæn da jeg strikkede den uden at tage ud. Det samme gælder ærmer kanterne.

31.03.2024 - 18:01

country flag Helen wrote:

Hello. After the 8th increase, the smallest size should have 300 stitches. But at the start of the ribbing at the bottom of the body, the pattern states 'Knit 1 round and increase 40 stitches evenly spaced = 236 stitches.' Should this read increase 40 to 340 stitches, please? P.S. This has been a good yarn stash buster jumper for me!

27.11.2023 - 12:15

DROPS Design answered:

Dear Helen, after you have increased to 300 sts on the yoke, you will divide piece for body and sleeves so that there are 196 sts for body (including 8 sts cast on under each sleeve), then before ribbing edge at the bottom you increase 40 sts evenly (to avoid ribbing to tighten piece) = 196+40= 236 sts. Happy knitting!

27.11.2023 - 15:52

country flag Hanne Lejre Pedersen wrote:

Spændende bluse er vild mef den Hvor meget garn i væg er der brugt, mere fordi jeg vil bruge mine rester samt købe noget nyt

09.11.2023 - 14:02

DROPS Design answered:

Hej Hanne, det har vi desværre ingen oversigt over, men prøv at finde en anden bluse i DROPS Karisma i den størrelse du er ude efter - du finder målene i måleskitsen nederst i alle opskrifter - så kan du bedre sammenligne :)

10.11.2023 - 15:13

country flag Karien wrote:

Waarom verschilt de kleur op de foto met de benodigde kleur wol. Op de foto is de kraag blauw en de kleur wol zeegroen?

20.10.2023 - 15:35

DROPS Design answered:

Dag Karien,

De kleuren die je op het beeldscherm ziet kunnen altijd afwijken van de werkelijke kleuren omdat de licht per keer anders invalt en vooral bij dit soort 'moeilijke' (voor de een is het groen, de ander zegt blauw), dus bekijk altijd de daadwerkelijke kleuren van de bollen bij daglicht.

21.10.2023 - 10:32

country flag Karien wrote:

Waarom zijn de kleuren anders op de foto dan de beschreven benodigde wol. Bv. Op de foto is de kraag meer blauw en ik moet zeegroen gebruiken volgens de beschrijving.

20.10.2023 - 15:33

country flag Irina wrote:

Mardi Gras

07.08.2023 - 06:33

country flag Karin L wrote:

Rigtig fin trøje, hvor man kan få brugt alle resterne

06.08.2023 - 10:55

country flag Karina Haupt Larsen wrote:

Kulør på tilværelsen

05.08.2023 - 19:24

country flag Kristiina wrote:

It can be " Happy stripes"

04.08.2023 - 19:17