DROPS / 200 / 1

Back to the Beach by DROPS Design

Crocheted bags with stripes in DROPS Paris. The piece is worked in the round, bottom up.

Tags: bags, lace, stripes,
  • Back to the Beach / DROPS 200-1 - Crocheted bags with stripes in DROPS Paris. The piece is worked in the round, bottom up.
  • Back to the Beach / DROPS 200-1 - Crocheted bags with stripes in DROPS Paris. The piece is worked in the round, bottom up.
  • Back to the Beach / DROPS 200-1 - Crocheted bags with stripes in DROPS Paris. The piece is worked in the round, bottom up.
  • Back to the Beach / DROPS 200-1 - Crocheted bags with stripes in DROPS Paris. The piece is worked in the round, bottom up.
DROPS Design: Pattern no w-767
Yarn group C or A + A
-------------------------------------------------------

SIZE:
One-size.
Measurements: Circumference: 86 cm = 33 7/8”. Length (without straps): 36 cm = 14 1/4”.

MATERIALS (for 1 bag in each color):
DROPS PARIS from Garnstudio (belongs to yarn group C)
250 g color 17, off white
150 g color 41, mustard
100 g color 59, old pink
100 g color 101, light blue
100 g color 35, vanilla
For 1 bag you need 100 g color 17 off white, 50 g color 41 mustard and 100 g of color at bottom of bag.

If you work the piece in one color only, you will need:
250 g Paris for 1 bag.

CROCHET GAUGE:
16 double crochets in width and 9 rows in height = 10 x 10 cm = 4” x 4”.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 4.5 MM = US 7.
The hook size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger hook size. If you get too few stitches on 10 cm = 4", change to a smaller hook size.

-------------------------------------------------------
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here
-------------------------------------------------------


100% Cotton
from 1.25 $ /50g
DROPS Paris uni colour DROPS Paris uni colour 1.55 $ /50g
Purple Sheep Yarns
Order
DROPS Paris recycled denim DROPS Paris recycled denim 1.25 $ /50g
Purple Sheep Yarns
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 17.50$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN:
See diagrams A.1 and A.2.

CROCHET INFORMATION:
At the beginning of each round of single crochets, replace the first single crochet with 1 chain stitch. The round finishes with 1 slip stitch in the first chain stitch at the beginning of the round.
At the beginning of each round of double crochets, replace the first double crochet with 3 chain stitches. The round finishes with 1 slip stitch in the 3rd chain stitch at the beginning of the round.

CROCHET TIP (for chain stitches):
1 chain stitch is equivalent to 1 double crochet in width. Make sure the loop made in the chain stitch is pulled some way up the hook so that it is not tight. If the chain stitch is worked too tightly, the pattern will be tight in sections where there are lots of chain stitches.

INCREASE TIP-1:
Increase 1 double crochet by working 2 double crochets in 1 double crochet. Increase 1 double crochet in each stitch before and after both marker threads (= 4 double crochets increased on round).

INCREASE TIP-2 (evenly spaced):
To work out how to increase evenly count the total number of stitches on the round (e.g. 130 stitches) and divide by the number of increases to be made (e.g. 8) = 16.25.
In this example increase by working 2 double crochets in approx. each 16th stitch.

3 DOUBLE CROCHETS TO 1 DOUBLE CROCHET:
Work 1 double crochet in first stitch, but wait with the last yarn over and pull through (= 2 loops on hook), work 1 more double crochet in the same way in each of the next 2 stitches, but pull the last yarn over through all 4 loops on the hook (= 1 stitch)

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

BAG - SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round, bottom up. The bottom is crocheted together to finish.

BAG:
Work 142 chain stitches with hook size 4.5 mm = US 7 and old pink. Form them into a ring with 1 slip stitch in the first chain stitch on the round.
ROUND 1: Work 1 chain stitch (= 1 single crochet) – read CROCHET INFORMATION, work 1 single crochet in the next chain stitch, * skip the next chain stitch, work 1 single crochet in each of the next 4 chain stitches *, work from *-* a total of 28 times = 114 single crochets. Insert a marker thread at the beginning of the round and a marker thread after 57 single crochets (= 57 single crochets left on round).
ROUNDS 2-5: Work 1 double crochet in each single crochet. AT THE SAME TIME on each round increase 1 stitch on each side of both marker threads – read INCREASE TIP-1 = 130 stitches. REMEMBER THE CROCHET GAUGE!
ROUND 6: Work 1 double crochet in each double crochet and increase 8 double crochets evenly on round – read INCREASE TIP-2 = 138 double crochets.
Now continue as follows – read CROCHET TIP: Work A.1 a total of 46 times on the round. When the diagram has been completed in height repeat the last row in the diagram. When the piece measure 18 cm = 7” from the cast-on edge change to off white. Continue working the last round in A.1 until the piece measures 31 cm = 12 1/4” from the cast on edge.

Work A.2 over each repeat of A.1 – remember CROCHET INFORMATION.
Change to mustard and work the edge and straps as follows:
ROUND 1: Work * 1 double crochet in each of the first 23 double crochets, work 72 chain stitches – make sure that the chain stitches are not tight (the row of chain stitches should measure 45 cm = 17 3/4”), skip 23 double crochets, work 1 double crochet in each of the next 23 double crochets *, work from *-* 1 more time on the round = 2 straps.
ROUND 2: Work * 1 double crochet in each of the first 21 double crochets, work 3 DOUBLE CROCHETS TO 1 DOUBLE CROCHET – read description above, work 1 double crochet in each of the next 70 chain stitches (there is 1 chain stitch left before the next double crochet on the round), work 3 DOUBLE CROCHETS TO 1 DOUBLE CROCHET, work 1 double crochet in each of the next 21 double crochets *, work from *-* 1 more time on the round = 228 double crochets.
ROUND 3: Work 1 single crochet in each double crochet.
Cut and fasten the strands. Turn the piece so that right side faces right side and crochet the bottom together along the first row of chain stitches worked. Crochet using the same color as you have used at the bottom of the bag and work through both layers starting from the marker thread at the beginning of the round as follows: Work 1 single crochet in each chain stitch, but skip the same chain stitches skipped at the start of the piece. Cut and fasten the strand.
Work 2 more bags in the same way, but start with light blue or vanilla instead of old pink.

This pattern has been corrected. .

Updated online: 02.05.2019
Correction - straps: ROUND 2: Work * 1 double crochet in each of the first 21 double crochets, work 3 DOUBLE CROCHETS TO 1 DOUBLE CROCHET – read description above, work 1 double crochet in each of the next 70 chain stitches (there is 1 chain stitch left before the next double crochet on the round), work 3 DOUBLE CROCHETS TO 1 DOUBLE CROCHET, work 1 double crochet in each of the next 21 double crochets *, work from *-* 1 more time on the round = 228 double crochets.

Diagram

All measurements in charts are in cm.

symbols = 1 chain stitch
symbols = 1 double crochet in stitch
symbols = 1 double crochet around chain-space
symbols = start on this round - previous round already worked
diagram
signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 200-1) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (89)

country flag Sarah 25.08.2021 - 14:53:

Hi Corrine, I would love if you could send me the easier instructions. srhprovost at gmail.com. Thanks a lot.

country flag Mette Julie Nielsen 16.08.2021 - 23:01:

I would like an easier instruction too. My mail is mettejulienielsenhotmail.Com Thanks in advance

country flag Joke 25.07.2021 - 21:52:

Ik wil graag dit patroon op papier hebben zou dat kunnen en wat mooie kleuren ik ga de garen bij jullie bestellen kan ik dan ook het patroon van jullie krijgen op papier herl graag

user icon DROPS Design 19.08.2021 kl. 14:14:

Dag Joke,

Al onze patronen zijn gratis af te drukken via de knop 'Afdrukken' onder de materialenlijst. Klik op de knop 'Afdrukken' en dan op 'Patroon'. In het pop-up venster dat vervolgens in beeld komt klik je rechts boven op de link 'Het patroon afdrukken'.

country flag Karola 17.07.2021 - 09:16:

Dziękuję, miałam problem ze zrozumieniem wzoru, ale już sobie poradziłam- torba niemal ukończona ;) pozdrawiam 😊

country flag Karola 11.07.2021 - 12:44:

Hi Corrine, I would love if you could send me the easier instructions too. My e-mail is: karolina.konieczna😁wp.pl Thank you !!!

user icon DROPS Design 12.07.2021 kl. 09:28:

Karolino, napisz czego nie rozumiesz, spróbuję pomóc. Pozdrawiam

country flag Karolina 11.07.2021 - 12:42:

Hi Corrine, I would love if you could send me the easier instructions too. My e-mail is: karolina.koniecznawp.pl Thank you!

country flag Korien 06.07.2021 - 21:39:

Hey Corinne, can you email me the easier version? Thanks for rewriting! KorienhovengaATgmail.com.

country flag Sílvia Marques Silva 04.06.2021 - 03:42:

Hi Corrine, I would love if you could send me the easier instructions frucachet(hat) gmail.com.T hank you so much!

country flag Sofia 02.06.2021 - 12:02:

Hi Corrine, I would love if you could send me the easier instructions. stavrsofia😁gmail.com Thank you so much!

country flag Ana 18.05.2021 - 16:23:

Hi Corinne!! Please could you share your easier version with me too? My email is naniblue @ gmail.com Thank You!!!

Post a comment to pattern DROPS 200-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.