Merry Santas by DROPS Design

Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.

  • Merry Santas / DROPS Children 41-1 - Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.
  • Merry Santas / DROPS Children 41-1 - Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.
  • Merry Santas / DROPS Children 41-1 - Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.
  • Merry Santas / DROPS Children 41-1 - Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.
  • Merry Santas / DROPS Children 41-1 - Knitted sweater and hat for children in DROPS Air. The sweater is worked top down with round yoke and Santa pattern. The hat is worked in the round, bottom up. Sizes 2 - 14 years. Theme: Christmas.
DROPS Design: Pattern no ai-026-bn
Yarn group C or A + A
-----------------------------------------------------------

SWEATER:

SIZES:
2 - 3/4 - 5/6 - 7/8 - 9/10 - 11/12 - 13/14 years
Children’s height in cm:
92 - 98/104 - 110/116 - 122/128 - 134/140 - 146/152 - 158/164
Children’s height in feet:
3ft - 3ft3/3ft5 - 3ft3/3ft5 – 3ft7/3ft9 - 4ft5/4ft7 - 4ft9/4ft12 - 5ft2/5ft5

Finished measurements:
Chest measurements: 66-70-76-78-82-84-88 cm = 26"-27 1/2"-29 1/2"-30 3/4"-32 1/4"-33"-34 5/8"
Full length: 36-40-44-48-50-52-54 cm = 14 1/4"-15 3/4"-17 1/4"-19"-19 3/4"-20 1/2"-21 1/4"
All measurements in charts are in cm.

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
150-150-150-200-200-200-200 g color 04, medium grey
50-50-50-50-50-50-50 g color 01, off white
50-50-50-50-50-50-50 g color 02, wheat
50-50-50-50-50-50-50 g color 25, raspberry
50-50-50-50-50-50-50 g color 31, black

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5 MM = US 8: Length 40 cm = 16” and 60 cm = 24”.
DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: Length 40 cm = 16” and 60 cm = 24”.
DROPS DOUBLE POINTED NEEDLES SIZE 5 MM = US 8.
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
The technique MAGIC LOOP can be used – you then only need circular needle of 80 cm = 32” in each size.

KNITTING GAUGE:
17 stitches in width and 22 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.


HAT:

SIZES:
2/4 – 5/6 – 7/8 – 10/12 – 13/14 years
Fits head size: 50/52 – 52/53 – 53/54 – 54/55 – 55/56 cm = 19 3/4"/20 1/2" – 20 1/2"/21" – 21"/21 1/4" – 21 1/4"/21 5/8" – 21 5/8"/22"
Length: Approx. 50-52-54-56-58 cm

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
50-50-100-100-100 g color 25, raspberry
50-50-50-50-50 g color 04, medium grey

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 4.5 MM = US 7: Length 40 cm = 16”.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM = US 4: Length 40 cm = 16”.
DROPS DOUBLE POINTED NEEDLES SIZE 4.5 MM = US 7.
The technique MAGIC LOOP can be used – you then only need circular needle of 80 cm = 32” in each size.

KNITTING GAUGE:
18 stitches in width and 23 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------

Magic loop – See the technique here
Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


65% Alpaca, 28% Polyamide, 7% Wool
from 6.60 $ /50g
DROPS Air mix DROPS Air mix 6.60 $ /50g
Purple Sheep Yarns
Order
DROPS Air uni colour DROPS Air uni colour 6.60 $ /50g
Purple Sheep Yarns
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 46.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

INCREASE/DECREASE TIP (evenly spaced):
To work out how to increase/decrease evenly, count the total number of stitches on needle (e.g. 60 stitches), and divide by the number of increases/decreases to be made (e.g. 6) = 10. In this example, increase by making 1 yarn over after each 10th stitch. On the next round knit the yarn overs twisted to avoid holes. When decreasing, knit together each 9th and 10th stitch.

PATTERN:
See diagram A.1. Choose the diagram for your size. The pattern is worked in stockinette stitch.

KNITTING TIP:
To avoid the garment losing its elasticity when working pattern, it is important that the strands at the back are not tight. Use a larger size needle when working pattern if the piece becomes tight.

DECREASE TIP-2 (for sleeves):
Decrease 1 stitch on either side of the marker thread as follows: Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch.

DECREASE TIP-3 (for hat):
Work until there are 2 stitches left before the marker, knit 2 together (= 1 stitch decreased). Repeat at each marker.

BINDING-OFF TIP:
To avoid the bind-off edge being tight you can bind off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 4th stitch at the same time as binding off; the yarn overs are bind off as normal stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, from mid back and top down. The yoke is divided for body and sleeves and the body is continued in the round with circular needle. The sleeves are worked with double pointed needles/short circular needle, top down.

NECK:
Cast on 60-64-64-68-68-72-76 stitches with double pointed needles/short circular needle size 4 MM = US 6 and medium grey DROPS Air. Knit 1 round. Then work rib in the round (knit 2, purl 2) for 3 cm = 1 1/8". Change to circular needle size 5 MM = US 8.

YOKE:
Insert 1 marker at the beginning of the round; the yoke is measured from this marker! Knit 1 round where you increase 6-8-14-10-16-12-14 stitches evenly spaced – read INCREASE/DECREASE TIP = 66-72-78-78-84-84-90 stitches.
Now work according to diagram A.1 (= 11-12-13-13-14-14-15 repeats of 6 stitches). NOTE! Choose diagram for your size. Read KNITTING TIP!
REMEMBER THE KNITTING GAUGE! When A.1 is finished in height there are 176-192-208-208-224-224-240 stitches. Knit 1 round with medium grey where you decrease 4-8-12-8-12-4-8 stitches evenly spaced = 172-184-196-200-212-220-232 stitches.
Continue with stockinette stitch and medium grey until the yoke measures 15-15-16-17-18-19-20 cm = 6"-6"-6 1/4"-6 3/4"-7"-7 1/2"-8" from the marker.

Now divide for the body and sleeves:
Knit 25-27-29-30-32-33-34 (= half back piece), place the next 36-38-40-40-42-44-48 stitches on 1 thread, cast on 6 stitches (= in side under sleeve), knit 50-54-58-60-64-66-68 (= front piece), place the next 36-38-40-40-42-44-48 stitches on 1 thread, cast on 6 stitches (= in side under sleeve), knit the last 25-27-29-30-32-33-34 stitches (= half back piece). The body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE!

BODY:
There are now 112-120-128-132-140-144-148 stitches on needle. Continue in the round with stockinette stitch and medium grey for 16-20-23-25-26-27-28 cm = 6 1/4"-8"-9"-9 3/4"-10 1/4"-10 5/8"-11" (or to desired length; there is approx. 3-3-3-4-4-4-4 cm = 1 1/8"-1 1/8"-1 1/8"-1 1/2"-1 1/2"-1 1/2"-1 1/2" left to finished length). Change to circular needle size 4 MM = US 6. Work rib (knit 2, purl 2) for 3-3-3-4-4-4-4 cm = 1 1/8"-1 1/8"-1 1/8"-1 1/2"-1 1/2"-1 1/2"-1 1/2". Loosely bind off with knit over knit and purl over purl – BINDING-OFF TIP. Cut and fasten the strand. The sweater measures approx. 36-40-44-48-50-52-54 cm = 14 1/4"-15 3/4"-17 1/4"-19"-19 3/4"-20 1/2"-21 1/4" from the shoulder down.

SLEEVES:
Place the 36-38-40-40-42-44-48 stitches from the thread on the one side of the piece on double pointed needles/short circular needle size 5 MM = US 8 and knit up 1 stitch in each of the 6 stitches cast on under the sleeve = 42-44-46-46-48-50-54 stitches. Insert a marker thread in the middle of the 6 stitches under the sleeve. Allow the thread to follow your work onwards; it will be used when decreasing under the sleeve.
Start at the marker thread and work stockinette stitch in the round, with medium grey, for 3 cm = 1 1/8". Now decrease 2 stitches under the sleeve – read DECREASE TIP-2. Decrease like this every 3-5-6-7-8-9-10 cm = 1 1/8"-2"-2 3/8"-2 3/4"-3 1/8"-3 1/2"-4" a total of 4 times = 34-36-38-38-40-42-46 stitches. Continue working until the sleeve measures 15-20-24-26-30-34-37 cm = 6"-8"-9 1/2"-10 1/4"-11 3/4"-13 3/8"-14 1/2" from the division. There is approx. 3-3-3-4-4-4-4 cm = 1 1/8"-1 1/8"-1 1/8"-1 1/2"-1 1/2"-1 1/2"-1 1/2" left to finished length; try the sweater on and work to desired length. Knit 1 round where you increase 6-4-6-6-4-6-2 stitches evenly spaced = 40-40-44-44-44-48-48 stitches. Change to double pointed needles size 4 MM = US 6. Work rib (knit 2, purl 2) for 3-3-3-4-4-4-4 cm = 1 1/8"-1 1/8"-1 1/8"-1 1/2"-1 1/2"-1 1/2"-1 1/2". Bind off with knit over knit and purl over purl – remember BINDING-OFF TIP! The sleeve measures approx. 18-23-27-30-34-38-41 cm = 7"-9"-10 5/8"-11 3/4"-13 3/8"-15"-16 1/8" from the division.
Work the other sleeve in the same way.

KNOT:
Make a knot at the top of each Santa hat. Cut 2 strands off-white, each 10 cm = 4” long. Put the strands together and thread them through the top off-white stitch on the hat, with both ends on the right side. Tie a knot, then another knot but in the opposite direction – see sketch. Cut the strands leaving ½ cm = 1/8” ends. Repeat at the top of each Santa hat.

-------------------------------------------------------

HAT – SHORT OVERVIEW OF THE PIECE:
The piece is worked with circular needle, in the round and bottom up. Change to double pointed needles when necessary, after decreasing stitches at the top.

HAT:
Cast on 96-100-104-108-112 stitches with circular needle size 3.5 MM = US 4 and medium grey DROPS Air. Purl 1 round. Then work rib in the round (knit 2, purl 2) for 4-5-5-6-6 cm = 1 1/2"-2"-2"-2 3/8"-2 3/8".
Change to circular needle size 4.5 MM = US 7 and knit 1 round where you decrease 12-12-12-12-12 stitches evenly spaced – read INCREASE/DECREASE TIP = 84-88-92-96-100 stitches.
Change to raspberry and continue with stockinette stitch.
REMEMBER THE KNITTING GAUGE!
When the piece measures 18-19-19-19-20 cm = 7"-7 1/2"-7 1/2"-7 1/2"-8" from the cast-on edge, decrease 0-4-2-0-4 stitches evenly spaced = 84-84-90-96-96 stitches.
Insert 6 markers with 14-14-15-16-16 stitches between each one. On the next round decrease 1 stitch before each marker – read DECREASE TIP-3 (= 6 stitches decreased). Decrease like this every 2nd round a total of 2-2-2-3-3 times. Then every 6th-7th-7th-7th-7th round 10-10-11-11-11 times = 12 stitches.
Work until the hat measures 50-52-54-56-58 cm = 19 3/4"-20 1/2"-21 1/4"-22"-22 3/4", then knit all stitches together 2 and 2 = 6 stitches.
Cut the strand and pull it through the remaining stitches, tighten and fasten well.

POM-POM:
Make a pom-pom of 5 cm = 2" in diameter with medium grey. Sew it to the top of the hat.

Diagram

All measurements in charts are in cm.

symbols = medium grey
symbols = off white
symbols = raspberry
symbols = wheat
symbols = black
symbols = between 2 stitches make 1 yarn over, on the next round work the yarn over twisted to avoid a hole
diagram
diagram
signature-image

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Children 41-1) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (11)

country flag Marisa wrote:

Buongiorno...ho provato a realizzare questo modello per una bimba di due anni,.. purtroppo il maglioncino mi fa una brutta piega sotto il collo prima del motivo jacquard... avrò tirato troppo i fili del motivo? Grazie mille. Marisa

04.12.2021 - 17:20:

country flag Marisa wrote:

Buongiorno, sono Marisa...ho provato a realizzare il modello seguendo le indicazioni molto precise... purtroppo sotto al collo prima del motivo jacquard il maglioncino indossato fa una brutta piega... potrebbe essere che ho tirato troppo il motivo jacquard?...grazie mille

04.12.2021 - 15:43:

country flag Bernadette wrote:

Bonjour, peut-on éviter le décalage des motifs du jacquard en fin de tour ? Merci pour votre réponse. Cordialement

24.11.2021 - 09:42:

DROPS Design answered:

Bonjour Bernadette, dans ce type de modèle, on n'aura pas de décalage entre les couleurs car le début/la fin des tours se tricote dans la même couleur (celle du fond). Sinon, on peut utiliser parfois la technique des rayures (cf vidéo). Bon tricot!

24.11.2021 kl. 15:37:

country flag Bernadette wrote:

Bonjour, je ne comprends pas vos chiffres. L'échantillon dit : 17 m pour 10 cm =>1 cm 1,7 m. Ainsi, par âge il faut monter : 2 ans = 33 cm => 57 m (l'explication = 60 m) 3/4 ans = 35 cm => 60 m (l'explication = 64 m)* 5/6 ans = 38 cm => 65 m (l'explication = 64 m)* 7/8 ans = 39 cm => 67 m (l'explication = 68 m)" 9/10 ans = 41cm => 70 m (l'explication = 68 m)" Pourquoi ces différences, pourquoi pour * 64 m = 35 & 39 cm ? Idem pour " Merci, cordialement

05.11.2021 - 09:23:

DROPS Design answered:

Bonjour Bernadette, le pull se tricote de haut en bas, pas de bas en haut, autrement dit, ce sont les mailles du col que vous montez - si vous calculez le nombre de mailles du dos/devant (avant les augmentations des côtes), vous obtiendrez les bonnes mesures. Retrouvez des photos en cours de réalisation dans le cadre du DROPS-Along de Noël. Bon tricot!

05.11.2021 kl. 09:40:

country flag Bernadette wrote:

Bonjour Madame, je tricote le pull "Merry santas" en 3/4 ans. Concernant le diagramme A 1, pourquoi est-il présenté à l'envers sur la page ? Pour le tricoter, il faut bien commencer par les 2 rangs de jersey comportant les 6 mailles ? Sinon, je ne comprends pas comment on passe de 72 m à 192 m après avoir terminé A1 ? Avec mes remerciements. Cordialement

03.11.2021 - 16:38:

DROPS Design answered:

Bonjour Bernadette, le pull se tricote de haut en bas, on va donc commencer par le col et le bonnet des Pères Noël. Tricotez l'intégralité des rangs de A.1 en commençant en bas à droite (= 6 mailles au 1er tour) et répétez le diagramme en largeur. En 11/12 ans, vous augmentez au 1er rang (= 3 m gris, 1 m naturel, 2 m gris, 1 jeté en gris) répétez de (à) = vous avez 7 m dans chaque A.1 tout le tour. Vous pourrez voir des photos de cette étape ici, dans le KAL de Noël. Bon tricot!

03.11.2021 kl. 16:51:

country flag Marion wrote:

Hallo, ich habe Sorge, dass das Rot beim Baden auslässt?

30.10.2021 - 21:22:

DROPS Design answered:

Liebe Marion, dunkle Farben enthalten anfangs oft zusätzliche Farbe, daher ist es wichtig, dass das Kleidungsstück so lange ausgespült wird, bis das Wasser klar ist. Damit vermeidet man, dass die überschüssige Farbe andere Farben des Strickstücks beeinträchtigt. Viel Spaß beim stricken!

03.11.2021 kl. 07:11:

country flag Anita Walseth Selboe wrote:

Under bærestykke står det at det skal være 27 + 27 + 54 masker dvs totalt 108, men når jeg kommer til bolen står det at jeg skal ha 120 masker på omg,? Er det feil i mønsteret?

27.10.2021 - 12:06:

DROPS Design answered:

Hej Anita. Du lägger upp 6 m under varje erm (=12 m totalt) så om du räknar med de får du 120 m totalt. Mvh DROPS Design

27.10.2021 kl. 13:15:

country flag Michaela wrote:

Vielen Dank für die schnelle Antwort, ja beim Betrachten des Fotos habe ich das auch gesehen. Zu guter Letzt kann man es ja seinen Bedürfnissen anpassen, auf alle Fälle macht es Spaß, den Santa Pulli zu stricken. LG.

26.10.2021 - 22:50:

country flag Michaela wrote:

Warum werden beim Ärmel vorm Bündchen die Maschen wieder zugenommen, die vorher abgenommen wurden? Das kenne ich bisher aus keiner Anleitung und ich stricke schon seit mehr als 50 Jahren.

26.10.2021 - 22:07:

DROPS Design answered:

Liebe Michaela, je nachdem, wie eng die Bündchen werden sollen und wie stark der Ärmel unten "gerafft" werden soll, kann das Bündchen enger oder weniger eng gestrickt werden. Bei diesem Pullover werden zuerst für die gesamte Ärmelform Maschen abgenommen und dann werden vor dem Bündchen wieder Maschen zugenommen, damit das Bündchen im Verhältnis zum restlichen Ärmel nicht zu eng wird. Wie Sie auf dem Foto sehen können, sitzt das Bündchen eher locker. Viel Spaß beim Stricken!

26.10.2021 kl. 22:27:

country flag Silke wrote:

Kann ich diesen Pullover auch gut mit Drops Nepal stricken oder kommt dann das Muster weniger gut zur Geltung? Ist Nepal auch gut für ein kleines Kind geeignet bzw. kratzt diese viel mehr als Drops Air? Muss ich dann die Menge der Knäuel einfach verdoppeln weil Nepal die halbe Lauflänge von Air hat? Lieben Dank für eine Antwort :)

21.10.2021 - 23:31:

DROPS Design answered:

Liebe Silke, gerne können Sie auch Nepal stricken, beide Garne sind Garngruppe C, benutzen Sie den Garnumrechner um die neue Garnmenge kalkulieren zu lassen; hier finden Sie unsere Modellen aus Nepal - je nach Empfindlichkeit kann es aber unterschiedlich sein, gerne wird Ihnen Ihr DROPS Store am besten helfen und empfehlen. Viel Spaß beim stricken!

22.10.2021 kl. 07:19:

Post a comment to pattern DROPS Children 41-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

From the #dropsfan gallery

Merry Santas

@chrissonne3, Germany

Merry Santas

Madelen, Norway

Merry Santas

Brigitte Kuschel, Germany

See more