DROPS Baby / 33 / 10

Warm Smiles by DROPS Design

Knitted balaclava with lace pattern for babies in DROPS Baby Merino. Sizes: Premature – 2 years

DROPS Design: Pattern no bm-092-by
Yarn group A
-------------------------------------------------------

SIZES: 0/1 - 1/3 - 6/9 - 12/18 months (2) years
Fits head size: 34/38 - 40/42 - 42/44 - 44/46 (48/50) cm = 13 3/8”/15” – 15 3/4”/16 1/2” – 16 1/2”/17 1/4” – 17 1/4”/ 18” (19”/19 3/4”)

MATERIALS:
DROPS BABY MERINO from Garnstudio (belongs to yarn group A)
50-50-50-50 (50) g color 43, light sea green

KNITTING GAUGE:
24 stitches in width and 32 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM = US 2,5.
DROPS CIRCULAR NEEDLE SIZE 3 MM = US 2,5: Length 40 cm = 16” for stockinette stitch.
Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!

100% Wool
from 4.20 $ /50g
DROPS Baby Merino uni colour DROPS Baby Merino uni colour 4.20 $ /50g
Purple Sheep Yarns
Order
DROPS Baby Merino mix DROPS Baby Merino mix 4.20 $ /50g
Purple Sheep Yarns
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 4.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------


RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge in height = Knit 2 rows.

RIDGE/GARTER STITCH (worked in the round):
1 ridge in height = 2 rounds; Knit 1 round and purl 1 round.

PATTERN:
See diagram A.1. The diagram shows all rows in the pattern from the right side.

INCREASE TIP:
Increase 1 stitch by making 1 yarn over; on the next round purl the yarn over twisted to avoid a hole. The first time you increase, make the 1 yarn over before the purled stitches. The next time you increase, make 1 yarn over after the purled stitches. Continue increasing alternately before and after the purled section.
----------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

BALACLAVA – SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth with circular needle from mid-top of head and down to the neck. Then it is worked in the round with double pointed needles/short circular needle.

BALACLAVA:
Cast on 29-29-34-34 (39) stitches (including 1 edge stitch on each side) with circular needle size 3 mm = US 2,5 and Baby Merino. Work 1 RIDGE – see description above. The next row is worked as follows from the right side: 1 edge stitch in garter stitch, work A.1A until there are 3 stitches left on the row (= 5-5-6-6-7 repeats of 5 stitches), A.1B (= 2 stitches) and finish with 1 edge stitch in garter stitch. Continue this pattern until the piece measures approx. 9-10-11-12 (13) cm = 3 1/2”-4”-4 3/8”-4 3/4” (5 1/8”) and bind off 1 stitch at the beginning and end of this row, making sure you finish after row 2 in A.1 so the last row is from the wrong side = 33-33-39-39-45 stitches on the needle. Insert 1 marker in the piece to measure from. The middle section on top of the balaclava is now finished. Cut the strand and place the stitches on an extra needle.

Start from the right side and knit up 26-31-31-36-41 stitches along the right edge of the middle section (seen from the right side); make sure you knit up on the inside of the edge stitch, continue the pattern as before over the stitches from the extra needle and knit up 26-31-31-36-41 stitches along the left side of the middle section (seen from the right side) = 79-89-94-104-119 stitches.
The next row is worked as follows, from the wrong side: 1 edge stitch in garter stitch, A.1B (= 2 stitches – start with row 4 in the diagram so the pattern matches the middle section), work A.1A over the next 75-85-90-100-115 stitches (= 15-17-18-20-23 repeats of 5 stitches) and finish with 1 edge stitch in garter stitch. Continue this pattern back and forth until the piece measures approx. 10-11-12-13 (14) cm = 4”-4 3/8”-4 3/4”-5 1/8” (5 1/2”) from the marker; finish after row 2 in A.1. Continue the pattern on the next row but at the end of the row cast on 6 new stitches (mid front under the chin) = 85-95-100-110 (125) stitches on the needle. Insert 1 new marker – THE PIECE IS NOW MEASURED FROM HERE!
Now continue in the round with double pointed needles, changing to short circular needle when necessary. Continue the pattern in the round over all stitches.

When the piece measures 2½-2½-2½ (3) cm = 7/8”-7/8”-7/8” (1 1/8”) from the new marker, increase all purl 3 sections to purl 4 – read INCREASE TIP = approx. 102-114-120-132 (150) stitches (if you are on a yarn-over round in A.1, the yarn overs are not included in the stitch count).
Increase like this every 2 cm = 3/4” a total of 3 times (= 6 purl stitches in each purl section) = approx. 136-152-160-176 (200) stitches. When the piece measures 9-10-11-12 (13) cm = 3 1/2”-4”-4 3/8”-4 3/4” (5 1/8”) from the last marker (or to desired length), work 2 RIDGES – see description above – in the round over all stitches. Then bind off with picot as described below.

BIND-OFF EDGE WITH PICOT:
Bind off from the right side as follows: Knit 1, (* insert the right needle between the next 2 stitches on the left needle, i.e. between the stitches, not through them, make 1 yarn over, pull the yarn over between the stitches and place it on the left needle *, work from *-* 2 more times so there are 3 new stitches on the left needle. ** Knit the first stitch on the left needle, pass the first stitch on the right needle over the last stitch worked **), work from **-** a total of 5 times and repeat from (-) along the whole edge until there is only 1 stitch on the left needle. Cut the strand and pull it through this last stitch.

EDGE AROUND OPENING:
Knit up approx. 80 to 90 stitches around the opening in front; i.e. around the face (use a crochet hook when knitting up stitches, as this gives you a neat pick-up edge). Divide the stitches onto double pointed needles. Knit 1 round where you increase evenly to 90-110 stitches. Work rib in the round = knit 1 / purl 1 for 2 cm = 3/4”. Loosely bind off with knit over knit and purl over purl.

This pattern has been corrected. .

Updated online: 13.10.2020
New yarn amount in size: SIZES: 6/9 - 12/18 months - (2) years DROPS BABY MERINO from Garnstudio 50-50-100-100 -(100) g colour 43, light sea green

Diagram

All measurements in charts are in cm.

= knit from right side, purl from wrong side
= purl from right side, knit from wrong side
= between 2 stitches make 1 yarn over
= slip 1 stitch as if to knit, knit 2 and pass the slipped stitch over the knitted stitches, so it lies around the stitches
= no stitch; skip this square and work the next square as described above

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Baby 33-10) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (4)

Louise Hedegaard 22.10.2020 - 19:58:

Mht. dit svar på mit sidste spørgsmål, så bør opskriften vel ændres, idet man egentlig kun skal slå 4 masker op, når de 2 kantmasker skal indgå i mønsteret. Hvis man slår 6 masker op, passer det ikke med mønsteret.

DROPS Design 23.10.2020 kl. 15:50:

Hej Louise, Jo for kantmaskerne og A.1B indgår i mønsteret, det vil sige at du slår 6 nye masker op og strikker A.1A (5 masker) hele vejen rundt. Hvis du strikker den mindste størrelse har du nu 85 masker, så du kan strikke 17 rapporter A.1A. God fornøjelse!

Louise 17.10.2020 - 08:17:

Hej, Når man tilføjer de 6 m under hagen, så skal man stadig lave de 2 kantmasker på trods af man begynder at strikke rundt? Venlig hilsen Louise

DROPS Design 22.10.2020 kl. 12:15:

Hej Louise, nej nu strikker du mønster over alle masker :)

Anna 10.10.2020 - 12:31:

Very lovely pattern, but 50 g was definitely not enough for size 42-44.

Anita Wangen 05.10.2020 - 14:08:

Brukte ca 1 1/2 nøste på str 2 år

Post a comment to pattern DROPS Baby 33-10

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.