DROPS Extra / 0-1131

Carter by DROPS Design

Men's knitted jumper in DROPS Belle, with raglan and worked top down. Size: S - XXXL.

DROPS design: Pattern no vs-004
Yarn group B
Size: S - M - L - XL - XXL - XXXL
DROPS BELLE from Garnstudio
450-550-600-650-750-800 g color no 09, beige

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 and 80 cm / 16'' and 32'') SIZE 4 mm/US 6 - or size needed to get 21 sts x 28 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 and 80 cm / 16'' and 32'') SIZE 3.5 mm/US 4 - for rib.

Want to use a different yarn? Try our yarn converter!
Comments (36)

53% Cotton, 33% Viscose, 14% Linen
from 3.10 CAD /50g
DROPS Belle uni colour DROPS Belle uni colour 3.10 CAD /50g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 27.90CAD. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

Inc for raglan by working a YO on each side of A.1 in every raglan. On next round K YOs twisted to avoid holes.

See diagram A.1.

Dec 1 st before marker as follows: Work until 2 sts remain before marker, slip 1 st as if to K, K 1, psso.
Dec 1 st after marker as follows: K 2 tog.

Worked in the round on circular needle, top down. Cast on 114-117-120-123-126-129 sts on circular needle size 3.5 mm / US 4 with Belle. K 1 round. Then work rib (= K 1/P 2). Switch to circular needle size 4 mm / US 6 when piece measures 2 cm / 3/4''. Now continue piece in stockinette st. On first round dec 18-17-16-15-14-13 sts evenly = 96-100-104-108-112-116 sts (this is done to give the garment better shape). On next round, inc 24-26-30-40-48-70 sts evenly = 120-126-134-148-160-186 sts. Insert 1 marker at beg of round = mid back. On next round work as follows from mid back: K 17-18-20-24-27-33 (= half back piece), A.1, K 6, A.1 (= sleeve), K 34-37-41-48-54-67 (= front piece), A.1, K 6, A.1 (= sleeve ), K 17-19-21-24-27-34 (= half back piece). Continue pattern like this while AT THE SAME TIME working an elevation in the back as follows: Work 8 sts past marker, turn, tighten yarn and work 16 sts back, turn, tighten yarn and work 24 sts, turn, continue to work 8 sts more for every turn until a total of 64 sts have been worked after last turn, turn and work 1 round over all sts until mid back again. On next round start inc for RAGLAN – see explanation above - NOTE: Inc differently on body and sleeves. REMEMBER THE KNITTING GAUGE

Inc every round 0-4-4-4-4-4 times in total, then every other round 28-27-29-30-32-33 times. There are 90-99-107-116-126-141 sts on front and back piece.

Inc every other round 16-19-21-22-24-27 times, then every 4th round 6-5-5-5-5-4 times. There are 70-74-78-80-84-88 sts for each sleeve.

When all inc are done there are 320-346-370-392-420-458 sts on needle. On next round, work as follows: K 45-49-53-58-63-70, slip the next 70-74-78-80-84-88 sts on a stitch holder for sleeve, cast on 8 new sts under sleeve (insert a marker in the middle of these new sts), K 90-99-107-116-126-141, slip the next 70-74-78-80-84-88 sts on a stitch holder for sleeve, cast on 8 new sts under sleeve (insert a marker in the middle of these new sts), K 45-50-54-58-63-71 = 196-214-230-248-268-298 sts. NOW MEASURE PIECE FROM HERE!

When piece measures 4 cm / 1½'', dec 1 st on each side of markers in the side - READ DECREASE TIP (= 4 sts dec). Repeat dec every 14-14-14-30-30-30 cm / 5½"-5½"-5½"-11 3/4"-11 3/4"-11 3/4" 2-2-2-1-1-1 more times = 184-202-218-240-260-290 sts. When piece measures 42-43-44-45-46-47 cm / 16½''-17''-17¼''-17¾''-18''-18½'', K 1 round while AT THE SAME TIME inc 20-17-16-15-16-13 sts evenly = 204-219-234-255-276-303 sts. Switch to circular needle size 3.5 mm / US 4. Work rib = K 1/P 2. When rib measures 4 cm / 1½'', loosely bind off K over K and P over P.

Worked in the round on double pointed needles.
Slip the 70-74-78-80-84-88 sts from stitch holder back on double pointed needles size 4 mm / US 6. Cast on 8 new sts under sleeve, insert 1 marker in the middle of the new sts = 78-82-86-88-92-96 sts. NOW MEASURE PIECE FROM HERE! Work in stockinette st AT THE SAME TIME continue A.1 as follows: Inc 1 YO before A.1 up towards middle of sleeve, K 2 tog after A.1 towards under sleeve (i.e. the 8 new sts cast on under sleeve). This is done so that A.1 meets under sleeve and disappears, repeat dec every other round until all sts in both A.1 are gone. K YO twisted on next round, it should not make holes. When piece measures 4 cm / 1½'', dec 1 st on each side of marker - READ DECREASE TIP. Repeat dec every 3½-3½-3-3-2½-2½ cm / 1 1/4"-1 1/4"-1"-1"-7/8"-7/8" 11-12-13-13-14-15 more times = 54-56-58-60-62-64 sts.

Work in stockinette st until piece measures 51-50-50-50-49-49 cm / 20"-19 3/4"-19 3/4"-19 3/4"-19 1/4"-19 1/4". K 1 round while AT THE SAME TIME inc 6-4-5-3-4-2 sts evenly = 60-60-63-63-66-66 sts. Switch to double pointed needles size 3.5 mm / US 4 and work rib = K 1/P 2. Bind off when piece measures 55-54-54-54-53-53 cm / 21½"-21 1/4"-21 1/4"-21 1/4"-21"-21" (shorter measurements in the larger sizes because of wider shoulders). Work the other sleeve the same way.

Cast on 23 sts (includes 1 edge st in each side) on double pointed needles size 4 mm / US 6 with Belle. Continue in stockinette st back and forth with 1 edge st in GARTER ST - see explanation above - in each side of piece. When piece measures 8 cm / 3'', adjust so that next row is from WS, inc 4 sts evenly from WS = 27 sts. Switch to double pointed needles size 3.5 mm / US 4 and work as follows from RS: 1 edge st in garter st, rib = K 1/P 2 until 2 sts remain, finish with K 1 and 1 edge st in garter st. When piece measures 10 cm / 4'', bind off K over K and P over P.

Sew the openings under the sleeves. Sew the pocket on the left sleeve, approx 45 cm/18" from bind off edge.


= K from RS, P from WS
= P from RS, K from WS

Comments (36)

Leave your comment!

Isabella 28.07.2018 - 09:32:

Sempre sull’alzata: quello che continuo a non capire bene è cosa significhi “allo stesso tempo”. Il lavoro procede in tondo, l’alzata invece richiede di tornare avanti e indietro. Questo non crea due fori ai lati dell’alzata?

Isabella 22.07.2018 - 20:26:

Salve, ho bisogno di aiuto perché non capisco cosa sia l’alzata sul dietro, e come si unisca al resto. Forse potrebbe aiutare un’immagine o uno schizzo del dietro. Grazie

DROPS Design 22.07.2018 kl. 20:41:

Buonasera Isabella. Un'alzata consiste nel lavorare alcuni ferri solo sul numero di maglie indicate per rendere lo scollo sul dietro leggermente più alto rispetto allo scollo sul davanti e garantire una vestibilità migliore al capo. Buon lavoro!

Edw 13.04.2018 - 12:15:

Bonjour, Super j’ai bien fais ça! 😀 Merci pour vos réponses rapides !

Edw 13.04.2018 - 08:49:

Bonjour, Donc pour les manches, on augmente avant et après les 6m endroits qui se trouvent entre les A1?

DROPS Design 13.04.2018 kl. 11:18:

Bonjour Edw, pas exactement, A.1 = 1 m end, 2 m env, 4 m end, 2 m env, 1 m end. Les augmentations se font au début de la manche après A.1 soit après la dernière m de A.1 et à la fin de la manche avant A.1 soit avant la 1ère m de A.1. Vous pouvez placer un marqueur avant et après chaque A.1 pour bien repérer où faire les augmentations. Bon tricot!

Edw 13.04.2018 - 07:25:

Bonjour, Je commence le raglan mais j’ai un doute sur ma compréhension... au niveau des manches, faut il faire les augmentations tout de suite après le 1er marqueur de manche (donc début de manche) et juste avant le 2eme marqueur de manche (donc fin de manche) ou faut il les faire juste avant et après A1(c’est a dire tricoter les augmentations précédentes après le 1er marqueur de manche puis arrivé à A1 on fait l’augmentation) ? Merci d’avance pour votre aide

DROPS Design 13.04.2018 kl. 08:21:

Bonjour Mme Edw, on augmente pour le raglan après/avant A.1, donc pour les manches, on augmente après A.1 en début de manche et avant A.1 à la fin de la manche (= idem pour le dos et le devant, on augmente après A.1 au début du dos/devant et avant A.1 à la fin du dos/devant). Les augmentations vont juste se faire à un rythme différent sur le dos/devant et sur les manches Bon tricot!

Rosita 30.12.2017 - 12:15:

Salve,ho bisogno di un aiuto in quanto per questo modello che ho iniziato non e ben chiaro dove inserire i marcapunti,ce un video specifico?grazie

DROPS Design 30.12.2017 kl. 21:26:

Buonasera Rosita. Sul davanti/dietro, il segno va inserito nel passaggio tra l'ultima maglia avviata e la prima maglia avviata. Quando poi separa il davanti/dietro dalle maniche, deve avviare 8 m per il sottomanica e inserisce un segno al centro di queste 8 maglie. Buon lavoro!

Peppis 13.11.2017 - 10:55:

Jag får hål i ärmen när jag maskar av vid armhålet, vad gör jag för fel?

DROPS Design 13.11.2017 kl. 14:58:

Hej Peppis, det syr du ihop när du är klar med tröjan. Lycka till!

Mariia 09.10.2017 - 10:23:

Hi, I see all yarn marked with a yarn group. Does this mean that if some pattern suites for yarn group 'B', so I can use any yarn from that group? Thanks.

DROPS Design 09.10.2017 kl. 10:34:

Dear Mariia, sure you can, find here all yarn groups and read more about alternatives here. Happy knitting!

Amber 31.07.2017 - 19:15:

For the front and back raglan body increases (I am using the XL pattern) it says to increase 4 stitches every round, and 30 every other round. Does this mean I increase 4, then 30 on the next row, then 4 then 30; or do I increase 4 then 30 on the next round, then knit one round even, increase 4 on the next round, then 30 again on the next round? Do you increase the 30 in between every 4, or every other time after 4?

DROPS Design 01.08.2017 kl. 09:09:

Dear Amber, On body you inc every round a total of 4 times then every other round a total of 30 times. On sleeve you inc every other round a total of 22 times and every 4th round a total of 5 times. Increase as explained under "RAGLAN", ie inc 1 after A.1 at the beg of front/back piece or sleeves and/or inc 1 st before A.1 at the end of front/back piece or sleeves. Happy knitting!

Peppis 12.07.2017 - 13:53: http://peppis.se/

Nu borde förklara RAGLAN, lite bättre. Så även en nybörjare förstår!

Post a comment to pattern DROPS Extra 0-1131

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.