DROPS Alpaca Party - 13 alpaca yarns on sale all October!

Tutorial Videos

Categories
Videos: 1748
2:20
How to work false English rib and purl stitches on the round.

This DROPS video illustrates how to work false English/fisherman’s rib and purl stitches on the round. We have worked a few rows prior to shooting this video. Work like so: 1. round: * purl 1, make 1 yarn over, slip the next stitch on to the right needle as if to purl *, repeat from *-* to the end of the round 2. round: * purl 1, knit yarn over and the slipped stitch together *, repeat from *-* to the end of the round. Repeat 1. and 2. round For this video we have used DROPS Snow. You’ll have to follow pattern instructions (or diagrams where applicable) in addition to watching this video. Patterns using this technique can be found by clicking on the photos below.
3:16
How to work false English rib and purl stitches back and forth on needle

This DROPS video illustrates how to work false English/fisherman’s rib and purl stitches back and forth on the needle. We have worked a few rows prior to shooting this video. Work like so: 1st row: Knit 1, * purl 1, make 1 yarn over, slip the next stitch on to the right needle as if to purl *, repeat from *-* until 2 stitches remain, purl 1, knit 1 2nd row: Knit 1, * knit 1, purl yarn over and the slipped stitch together *, repeat from *-* until 2 stitches remain, knit 2. Repeat 1st and 2nd row. For this video we have used DROPS Snow. You’ll have to follow pattern instructions (or diagrams where applicable) in addition to watching this video. Patterns using this technique can be found by clicking on the photos below.
2:35
Shaker rib

Also called half fisherman, i.e not as bulky as fisherman rib. 1 edge st each side knits on every row. 1st row (WS): knit all sts. 2nd row (RS): *p1, knit 1 in the stitch below (aka p1, 1B)*, repeat *-* across row (if uneven number of sts end p1). Repeat row 1 and 2.
3:05
How to knit false fisherman's rib rib with 2 stitches in between.

In this DROPS video we show you how to knit false fisherman's rib rib with 2 stitches in between from in DROPS Extra 0-970. We already have knitted some rows and starts by showing row 2. (1st st is knitted in garter st (K in each row)). Row 2: * P 1, K 2 *, repeat from *-* 6 times in total, P 1. Row 3: * 1 double st (=K 1 st below next K st on needle - i.e. sts from the two previous rows are worked as one), P 2 *, repeat from *-* 6 times in total, 1 double st. (= 7 double sts in total). Repeat 2nd and 3rd row. This scarf is knitted in DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
3:52
How to work English rib variation with 3 garter stitches between

This is how you can make a rib pattern looking like English rib but not getting as bulky and yarn consuming. Number of sts (not incl edge sts) should be able to divide by 4 + 3. 1st row: 1 edge st in garter, *k3, slip 1 st as if to purl with yarn in front of work*, rep *-*, end row with k3, 1 edge st in garter. 2nd row: 1 edge st in garter, k1, * slip 1 st as if to purl with yarn in front of work, k3*, rep *-*, end row with slip 1 st as if to purl with yarn in front of work, k1 and 1 edge st in garter. Rep row 1 and 2.
3:38
Double stitch

In this video we show how to work 2 sts tog laying on top of each other to create a texture. We have already worked 2 inch/5 cm to easier show the pattern. From RS: * K 4, K1 in st below the K st on needle. (i.e. sts from the two previous rows are worked as one) *, repeat *-* two more times and end with K4. From WS: knit all sts, except double sts which are purled. Repeat these 2 rows for pattern. To see a pattern with this technique, see: DROPS 150-17 or the picture to the left.
1:48
How to knit 1 in stitch from previous round

In this DROPS video we show how to knit 1 in stitch from previous round. This technique can be used to make a create rib, nice textures and also vertical stripes when using 2 colors, but in this video we only use 1 color. We use the yarn DROPS Snow in this video. You must read a pattern and look at the diagram to be able to follow this video properly. You’ll find a pattern using this technique by clicking on the picture below
10:27
How to knit a cable with two-colored English rib

In this DROPS video we show how to knit a cable with two-colored English rib in the cloth used in DROPS 189-14. We show the row with cable, next row is row 5 and we use less stitches that it says in the pattern, so remember to read the patter to get the correct stitch numbers. This cloth is knitted in DROPS Cotton Light, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
28:32
How to work a 2-colored flower in English rib

In this DROPS video we work the 2-colored flower in English rib after chart A.1B to the sock in DROPS 198-15 These socks are worked in DROPS Nord, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the diagram to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
8:59
How to work a makeup pad in Fisherman`s rib

In this DROPS video we show how to work the makeup pad «Ribbed Scrubbies» in DROPS Extra 0-1495. These makeup pads are worked in DROPS Cotton Light but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
8:08
How to work a rib edge with increase and English rib

In this DROPS video we show how to work a rib edge where we finish the rib with increase and English rib. We have already worked 3 cm = 1 1/8" rib (knit 1 twisted / purl 2) and start the video showing how to work in the stitch below the twisted knit stitch (i.e. stitch from previous round) like this: knit 1, 1 yarn over, knit (2 stitches increased), then purl 2 stitch together. Work like that the entire round. Continue to work English rib with yarn overs in the round to the correct length. Then loosely cast off stitches with knit over knit and purl over purl. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
3:10
Seed/Moss stitch

Row 1 (the right side): knit 1 stitch, purl 1 stitch Row 2 (the wrong side): purl over knitted stitch, knit over purled stitch Repeat row 2. A purled stitch looks like a knot, a knitted stitch looks like a V.
1:37
Seed/Moss st in the round

When you are working seed st in the round on a circular needle or double pointed needles it's a great idea to work with an uneven number of sts. You will then get a good transition between K and P sts all the way around, and the beginning of the round will be invisible, You work alternating K1 and P1 around and around. On next round you will then automatically work K over P and P over K, which is what seed st is all about. Happy seed st knitting!
2:05
Double seed/moss st

When you work double seed st you have 2 K sts next to each other, and 2 K sts above each other. Also 2 P sts beside each other and 2 P sts above each other. Work 1st row like this: repeat P2, K2 until end of row. Second row: K over K and P over P. 3rd row: P over K and K over P. 4th row: As second row. Repeat row 1-4.
3:33
Seed Stitch: Double in height

There are many varieties of Seed stitch and Double Seed stitch (aka moss stitch). Here we show a version which is worked with alternating K1 and P1 in width. But K2 and P2 over each other in height. We work 1 edge st each side in garter st (K on all rows). For the pattern to be visible, we have worked about 2"/5 cm before we continue as follows: SEED ST - DOUBLE IN HEIGHT: (remember K1 edge st each side) Row 1: * K1, P1 *, repeat from * - *. 2nd row: K over K and P over P. Row 3: * P1, K1 *, repeat from * - *. 4th row: P over P and K over K Repeat these 4 rows. To see a pattern with this technique, see: DROPS 135-39 or one of the picture to the left.
3:13
Double seed st/moss st in the round

When you work double seed st/moss st in the round on a circular needle you need to cast on a number of sts that can be divided by 4. Then you will get a nice transition between K and P sts all the way around, and you will not be able to see the beginning of the round. You work alternately K 2 and P 2 all way around. Round 1: work K2, P2 around Round 2: work K2, P2 around Round 3: work P2, K2 around Round 4: work P2, K2 around Repeat round 1.-4. It's a good idea to place a marker at the beginning of the round. In our video we show the end of 2nd round, the transition to 3rd round, and then the beginning of 3rd round.
3:56
How to work a rib with knit twisted and purl stitches – back and forth

In this DROPS video we show a rib worked back and forth with 1 knit twisted stitch and 2 purl stitches. By knitting stitches twisted these stitches will "pop out" a bit and you will get a more distinctive rib, also gives a firmer and more stable rib. At the end of the video, we show 2 examples on ribs worked: 1 knit twisted stitch and 1 purl stitch and 2 knit twisted stitches and 2 purl stitch. We use the yarn DROPS Snow in the video. You must read a pattern and look at the chart to be able to follow this video properly. You’ll find patterns where this technique is used by clicking on the pictures below.
1:21
How to work a rib with 1 knit twisted and 1 purl stitches

In this DROPS video we show to work a rib which is worked with 1 knit twisted stitch and 1 purl stitch. By knitting a stitch twisted these stitches will "pop out" a bit and you will get a more distinctive rib, also gives a firmer and more stable rib. We use the yarn DROPS Snow in the video. You’ll find a pattern by clicking on one of the pictures below.
2:33
How to work a rib with Knit 2 – Purl 2 and Knit 2 twisted – Purl 2

In this DROPS video we show how you can work a rib. Working a rib gives an elastic piece that is great for cuffs and edges. Often worked with Knit 1 / Purl 1 or Knit 2 / Purl 2. It’s important that all knitted stitches comes above knitted stitches, and all purled stitches come above the purled stitches. First, we show a rib with Knit 2 / Purl 2, then a rib with Knit 2 twisted / Purl 2. To get the twisted stitch, knit the stitch in the back loop. We show both techniques on the same piece so that you can more easily see the difference. We use the yarn DROPS Snow in the video. You’ll find patterns with these technique by clicking on the pictures below.
3:03
Rib - displaced

Work in rib * K 2, P 2 *, repeat from *-* around. When the displacing of the rib begins, work 1 round where the rib is displaced 1 stitch to the left as follows: Over K 2, P 2 there will be P 1, K 2, P 1. *Work 3 rounds with K over K and P over P, displace the rib 1 st to the left on next round (= 4 rounds) *, repeat from *-*.
12:18
Rib - Shifted 2

Shifted rib can shape a rib pattern or a whole garment. There are many ways to work shifted rib. Here we have decreased on each side of 6 sts in rib (as in DROPS 119-3), so that the piece is shaped in a little bow at the back of the back piece and the number of stitches are decreased. Once we start to knit no more sts should be dec, so therefore we will inc in each side on the same row as we are making the dec. Since we are inc just as many sts as we are dec, the number of sts will stay the same. Following the pattern we inc after 1st marker, dec before 2nd marker, dec after 3rd marker and inc before 4th marker - and this is done on each row worked from the right side. The sts that are inc with a yo shall be worked twisted on next row (i.e work in back loop) and also be worked into the rib pattern between markers. In pattern 119-3 you inc by making a yo, and dec by purling 2 sts tog. In other patterns we describe other inc and dec methods, but the idea of shifting the rib and shape the garment is the same. To see a pattern with this technique, see: DROPS 119-3 or one of the pictures to the left.
3:59
How to work an easy and nice texture pattern.

In this DROPS video we show how to work an easy and nice texture pattern, such as the rib to the Rose Blush vest in DROPS 212-44. Work like this: From RS: Work 3 edge stitches in garter stitch, * 2 stitches in stockinette stitch , 2 stitches in garter stitch *, work from *-* until there are 5 stitches left, 2 stitches in stockinette stitch and finish with 3 edge stitches in garter stitch. From WS: Work 3 edge stitches in garter stitch, * 2 stitches in stockinette stitch , 2 stitches in garter stitch *, work from *-* until there are 5 stitches left, 2 stitches in stockinette stitch and finish with 3 edge stitches in garter stitch. Continue like this to desired length. Ridge/garter stitch: Knit all rows. We use the yarn DROPS Snow in the video. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
3:00
How to knit smock pattern over 1 knit, 2 purls, 1 knit

In this DROPS video we show you how to create a smock pattern by winding the yarn 2 times around 4 stitches (1 knit, 2 purls, 1 knit). We work 2 edge stitches in each side and we have already knitted a few cm of pattern (1 knit, 2 purls, 1 knit). We start the video on the row where we are going to wind the yarn around the 4 stitches to create a smock pattern. Put the 4 stitches (1 knit, 2 purls, 1 knit) on a cable needle back of the work, wind the working yarn twice around this 4 stitches, then knit this stitches (1 knit, 2 purls, 1 knit). Choose by yourself how many rows there should be between each winding, and to create a texture; wind the yarn around the 4 next stitches before and 4 stitches after the last winding. We use the yarn DROPS Snow in the video.
9:37
Smock pattern: wind the yarn twice around sts

Here is a technique where we wind the working yarn around 6 stitches to create a nice texture while just working in rib (K2, P2). We cast on 22 sts, wind 6 sts tog on every 6th row. To create the texture we alternate the 6 sts wound tog for each repeat. The video starts on row 16 from WS before the first wind (P2, K2 across ending with P2). Row 17 (RS): * place 6 sts on a cable needle, wind the yarn twice around these 6 sts - tighten, work the 6 sts from cable needle as before (rib), P2 *. Repeat *-* 2 more times, but end last repeat with last K2 from cable needle. Continue in rib. Row 23 (´RS): K2, P2, * place 6 sts on a cable needle, wind the yarn twice around these 6 sts - tighten, work the 6 sts from cable needle as before (rib), P2*. Repeat *-* and end with K2. Repeat the rows with winding on every 6th row until desired measure.