DROPS / 206 / 44

Whiteout Jacket by DROPS Design

Knitted jacket with open ridges, false English rib and V-neck in DROPS Andes. Size: S - XXXL

DROPS design: Pattern an-062
Yarn group E or C + C
----------------------------------------------------------

SIZE:
S - M - L - XL - XXL – XXXL

Finished measurements:
Chest measurements: 108-116-124-134-146-158 cm = 42 1/2”-45 3/4”-48 3/4”-52 3/4”-57 3/8”-62”
Full length: 62-64-66-68-70-72 cm = 24 3/8"-25 1/4"-26"-26 3/4"-27 1/2"-28 3/8”

All measurements in chart are in cm.


MATERIALS:
DROPS ANDES from Garnstudio (belongs to yarn group E)
1100-1300-1400-1550-1700-1900 g color 0100, off white

KNITTING GAUGE:
9 stitches in width and 12 rows vertically in stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 10 mm = US 15: Length 60 or 80 cm = 24” or 32”.
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4” switch to larger needles. If you have too few stitches on 10 cm = 4” switch to smaller needles.

DROPS DARK BUFFELHORN BUTTONS NO 536: 4 pieces for all sizes

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

65% Wool, 35% Alpaca
from 7.85 $ /100g
DROPS Andes uni colour DROPS Andes uni colour 7.85 $ /100g
Purple Sheep Yarns
Order
DROPS Andes mix DROPS Andes mix 8.25 $ /100g
Purple Sheep Yarns
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 86.35$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

PATTERN:
See diagrams A.1 (= false English rib) and A.2.

GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.

MEASURING TIP:
All length measurements are done when piece is held up, otherwise the garment will be longer than measurements in chart when worn.

BUTTONHOLES:
Decrease for buttonholes on right band when garment is worn: 1 buttonhole = begin from right side and knit second and third stitch from edge together, then make 1 yarn over. On next row knit yarn over to make holes. Decrease for buttonholes when piece measures:
S: 6, 14, 23 and 32 cm = 2 3/8”, 5 1/2”, 9” and 12 1/2”
M: 6, 15, 24 and 33 cm = 2 3/8”, 6”, 9 1/2” and 13”
L: 6, 16, 25 and 34 cm = 2 3/8”, 6 1/4”, 9 3/4” and 13 3/8”
XL: 6, 15, 25 and 35 cm 2 3/8”, 6”, 9 3/4” and 13 3/4”
XXL: 6, 16, 26 and 36 cm = 2 3/8”, 6 1/4”, 10 1/4” and 14 1/4”
XXXL: 7, 17, 27 and 37 cm = 2 3/4”, 6 3/4”, 10 5/8” and 141/2”

DECREASE TIP (applies to neck at the front):
Decrease as follows on right front piece:
Work 5 stitches in garter stitch, slip yarn over and knit stitch of the needle knitwise, work next stitch as explained in pattern (i.e. either purl or “knit yarn over and knit stitch together”, then pass yarn over and knit stitch over stitch knitted/stitches knitted together, work the rest of row. NOTE: There should always be 1 English rib stitch towards band.

Decrease as follows on left front piece: Work until 7 stitches remain on row, knit the next 3 stitches together, work 5 band stitches in garter stitch. NOTE: There should always be 1 English rib stitch towards band.
----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

JACKET - SHORT OVERVIEW OF THE PIECE:
Work piece back and forth in parts, bottom up and sewn together when finished. Work sleeves back and forth on circular needle, bottom up. NOTE: When increasing/decreasing in false English rib, always count yarn over + slipped stitch as 1 stitch.

BACK PIECE:
Cast on 72-78-81-90-96-105 stitches (including 1 edge stitch in each side) on circular needle size 10 mm = US 15 with Andes. Work first row as follows from right side: Work 1 edge stitch in GARTER STITCH – read explanation above, * knit 1, purl 2 together *, work from *-* until 2 stitches remain, finish with knit 1 and 1 edge stitch in garter stitch = 49-53-55-61-65-71 stitches. Then work as follows from wrong side (read diagram from left towards right): Work 1 edge stitch in garter stitch, A.1 until 1 stitch remains and finish with 1 edge stitch in garter stitch. Pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch in each side of piece, seen from right side. Continue pattern like this. REMEMBER THE KNITTING GAUGE! When piece measures 10 cm = 4” - READ MEASURING TIP, work next row as follows from wrong side: Purl over all stitches (continue with 1 edge stitch in each side). Then work according to A.2. Work A.2 until piece measures approx. 31-31-31-34-34-34 cm = 12 1/4”-12 1/4”-12 1/4”-13 3/8”-13 3/8”-13 3/8”, adjust after one whole repetition of A.2. Now work 1 row as follows from right side: 1 edge stitch in garter stitch, * knit 1, purl 1 *, repeat from *-* until 2 stitches remain, knit 1 and 1 edge stitch in garter stitch. Then work A.1, work first row from wrong side, and pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch in each side of piece, seen from right side. When piece measures 42-43-44-45-46-47 cm = 16 1/2”-17”-17 1/4”-17 3/4”-18”-18 1/2”, bind off 3 stitches in each side for armholes = 43-47-49-55-59-65 stitches. Continue with A.1. When piece measures 44-46-46-48-50-50 cm = 17 1/4”-18”-18”-19”-19”-19 3/4”-19 3/4”, work next row as follows from wrong side: Purl all stitches. Then work according to A.2. When piece measures 58-60-62-64-66-68 cm = 22 3/4"-23 5/8"-24 3/8"-25 1/4"-26"-26 3/4", work 1 ridge over the middle 19-19-21-21-23-23 stitches. When piece measures 60-62-64-66-68-70 cm = 23 5/8"-24 3/8"-25 1/4"-26"-26 3/4"-27 1/2", decrease for neck as follows: Bind off the middle 9-9-11-11-13-13 stitches and finish each shoulder separately = 17-19-19-22-23-26 stitches remain on each shoulder. Continue with 5 stitches in garter stitch towards the neck and false English rib as before. Bind off the remaining stitches when piece measures 62-64-66-68-70-72 cm = 24 3/8"-25 1/4"-26"-26 3/4"-27 1/2"-28 3/8”.

RIGHT FRONT PIECE:
Cast on 40-43-46-49-52-58 stitches (including 1 edge stitch in each side) on circular needle size 10 mm = US 15 with Andes. Work first row as follows from right side: Work 5 band stitches in garter stitch, * knit 1, purl 2 together *, work from *-* until 2 stitches remain, finish with knit 1 and 1 edge stitch in garter stitch = 29-31-33-35-37-41 stitches. Then work as follows from wrong side (read diagram from left towards right): Work 1 edge stitch in garter stitch, A.1 until 5 stitches remain and finish with 5 band stitches in garter stitch. Pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch/5 band stitches in each side of piece, seen from right side. Continue pattern like this, when piece measures 6-6-6-6-6-7 cm = 2 3/8”-2 3/8”-2 3/8”-2 3/8”-2 3/8”-2 3/4”, decrease for first BUTTONHOLE – see explanation above. REMEMBER THE KNITTING GAUGE! When piece measures 10 cm = 4”, work next row as follows from wrong side: Purl all stitches until 5 stitches remain, work 5 band stitches in garter stitch. Work next row as follows from right side: 5 band stitches in garter stitch, A.2 until 1 stitch remains, work 1 edge stitch in garter stitch. Continue pattern like this. When piece measures 31-31-31-34-34-34 cm = 12 1/4”-12 1/4”-12 1/4”-13 3/8”-13 3/8”-13 3/8” (adjust after a whole repetition of A.2), purl 1 row as follows from right side: 5 band stitches in garter stitch, * knit 1, purl 1 *, repeat from *-* until 2 stitches remain, knit 1 and 1 edge stitch in garter stitch. Then work A.1, work first row from wrong side, and pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch/5 band stitches in each side of piece, seen from right side. Continue this pattern, AT THE SAME TIME when piece measures 33-34-35-36-37-38 cm = 13”-13 3/8”-13 3/4”-14 1/4”-14 1/2”-15” begin decrease for neck, decrease inside 5 stitches in garter stitch - read explanation above. Decrease every 3½-3½-3-3½-3-3 cm = 1 1/4”-1 1/4”-1 1/8”-1 1/4”-1 1/8”-1 1/8” 9-9-11-10-11-12 times in total. When piece measures 42-43-44-45-46-47 cm = 16 1/2”-17”-17 1/4”-17 3/4”-18”-18 1/2”, bind off 3 stitches at the beginning of a row from wrong side for armhole. After all decreases for neck and armhole there are 17-19-19-22-23-26 stitches on needle. Continue until piece measures 62-64-66-68-70-72 cm = 24 3/8"-25 1/4"-26"-26 3/4"-27 1/2"-28 3/8” and bind off.

LEFT FRONT PIECE:
Cast on 40-43-46-49-52-58 stitches (including 1 edge stitch in each side) on circular needle size 10 mm = US 15 with Andes. Work first row as follows from right side: Work 1 edge stitch in garter stitch, * knit 1, purl 2 together *, work from *-* until 6 stitches remain, finish with knit 1 and 5 band stitches in garter stitch = 29-31-33-35-37-41 stitches. Then work as follows from wrong side (read diagram from left towards right): Work 5 band stitches in garter stitch, A.1 until 1 stitch remains and finish with 1 edge stitch in garter stitch. Pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch/5 band stitches in each side of piece, seen from right side. Continue pattern like this and work as right front piece but reversed. Do not decrease for buttonholes.

SLEEVES:
Work piece back and forth on circular needle. Cast on 39-42-42-45-45-48 stitches (including 1 edge stitch in each side) on circular needle size 10 mm = US 15 with Andes. Work first row as follows from right side: Work 1 edge stitch in garter stitch, * knit 1, purl 2 together *, work from *-* until 2 stitches remain, finish with knit 1 and 1 edge stitch in garter stitch = 27-29-29-31-31-33 stitches. Then work as follows from wrong side (read diagram from left towards right): Work 1 edge stitch in garter stitch, A.1 until 1 stitch remains and finish with 1 edge stitch in garter stitch. Pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch in each side of piece, seen from right side. Continue pattern like this. REMEMBER THE KNITTING GAUGE! When piece measures 10 cm = 4”, work next row as follows from wrong side: Purl over all stitches (continue with 1 edge stitch in each side). Then work according to A.2. Continue pattern like this. AT THE SAME TIME when piece measures 12 cm = 4 3/4”, begin increase in the sides on sleeve. Increase 1 stitch in each side inside 1 edge stitch in garter stitch, increase every 9-8-8-7½-7½-7½ cm = 3 1/2”-3 1/8”-3 1/8”-2 7/8”-2 7/8”-2 7/8” 5 times in total = 37-39-39-41-41-43 stitches. Work the new stitches in the pattern. When 2 repetitions of A.2 have been worked, work 1 row as follows from right side: 1 edge stitch in garter stitch, * knit 1, purl 1 *, repeat from *-* until 2 stitches remain, knit 1 and 1 edge stitch in garter stitch. Then work A.1 (work first row from wrong side) and pattern begins and ends with 1 knit stitch in false English rib inside 1 edge stitch in garter stitch in each side of piece, seen from right side (as before). When piece measures 41-40-40-38-38-37 cm = 16 1/8”-15 3/4”-15 3/4”-15”-15”-14 1/2” work next row as follows from wrong side: Purl all stitches. Then work according to A.2. When piece measures 49-48-48-46-45-44 cm = 19 1/4”-19”-19”-18”-17 3/4”-17 1/4” (shorter measurements in the larger sizes because of wider shoulders), bind off. Work another sleeve the same way.

ASSEMBLY:
Sew the shoulder seams. Sew in sleeves and sew underarm seams and side seams in one in outer loops of ridges. Sew on buttons.

Diagram

All measurements in charts are in cm.

= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= 1 yarn over, slip a purl stitch on to right needle purlwise (from wrong side)
= knit yarn over and knit stitch together (from right side)

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 206-44) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (6)

Francesca 07.02.2020 - 10:07:

Vorrei sapere se esiste il modello per la realizzazione all'uncinetto. Grazie

DROPS Design 07.02.2020 kl. 12:07:

Buongiorno Francesca. Questo modello è disponibile solo per ferri. Nei nostri cataloghi ci sono molti modelli all’uncinetto. A questo link trova una selezione di cardigan tra cui ci auguriamo possa trovare un modello di suo gradimento. Buon lavoro!

Els Van Ettinger 05.01.2020 - 22:11:

Kan dit patroon ook op tweevnaalden gebreid worden

DROPS Design 08.01.2020 kl. 10:04:

Dag Els,

We hebben een instructie op de site staan waarin wordt uitgelegd hoe je een patroon aan kunt passen zodat je deze met rechte naalden kunt breien. Deze vindt je hier

Susan Hicks 13.07.2019 - 10:26:

I love the different pattern interest and the shape is perfect for me.

Marion 11.06.2019 - 09:47:

Sehr schönes Modell. Ich würde es gerne stricken.

Katherine 08.06.2019 - 07:14:

I would love this for an everyday sweater. I like that it flairs at the hem, that the pattern changes halfway down the length of it including the sleeves. And if you know me by now - it's v-neck, opens down the front and the hem is long. Very Pretty.

Giuseppina Grasso 05.06.2019 - 22:19:

Lo trovo molto elegante

Post a comment to pattern DROPS 206-44

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.