Alvina by DROPS Design

Knitted circle jacket in garter st with leaf pattern in DROPS BabyAlpaca Silk and DROPS Kid-Silk. Size children 3 - 12 years

DROPS Children 27-12
DROPS design: Pattern no bs-008-bn
Yarn group A + A or C
Size: 3/5 - 6/8 - 9/10 - 11/12 years
200-200-250-250 g color no 8112, ice blue
DROPS KID SILK from Garnstudio
75-100-100-125 g color no 07, light gray blue

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (60 or 80 cm / 24'' or 32'') SIZE 5 mm/US 8 - or size needed to get 17 sts x 34 rows in garter st with 2 strands = 4'' x 4'' (10 x 10 cm).


Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here


DROPS BabyAlpaca Silk DROPS BabyAlpaca Silk
70% Alpaca, 30% Silk
find alternatives

75% Mohair, 25% Silk
from 9.40 CAD /25g
DROPS Kid-Silk uni colour DROPS Kid-Silk uni colour 9.40 CAD /25g
Wool Warehouse Direct Ltd
needles DROPS Needles & Hooks Order

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
See diagrams A.1 to A.2. See diagram for correct size.

GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

Cast on 8 sts with 1 strand BabyAlpaca Silk and 1 strand Kid-Silk (= 2 strands) and divide them on 4 double pointed needles size 5 mm / US 8 (= 2 sts on per needle). Work according to A.1 (= 8 repetitions of A.1 in width). When the first 15-15-19-19 rounds in A.1 have been worked, displace beg of round 1 st towards the left first on every other round, then every 4th round – i.e. beg of round is always before first YO in diagram so make it less visible. Beg of round at the end will be in middle of the first repetition of A.1. REMEMBER THE KNITTING GAUGE Switch to circular needle when needed. When A.1 has been worked one time vertically = 144-144-176-176 sts on round and piece measures approx. 22-22-28-28 cm / 8 3/4"-8 3/4"-11"-11" in diameter. Insert 8 markers in piece, insert 1st marker in 1st st on round, then insert 7 markers 17-17-21-21 sts apart, markers are directly over tip on each leaf. Work in GARTER ST - see explanation above, AT THE SAME TIME on first round inc 1 st on each side of markers. Inc with 1 YO on each side of sts with marker – on next round P YO twisted to avoid holes = 16 inc sts per round. Inc like this every other round a total of 1-2-1-2 times = 160-176-192-208 sts. Continue in garter st until piece measures 26-28-32-34 cm / 10 1/4"-11"-12½"-13½" in diameter.

On next round K, AT THE SAME TIME bind off all sts between 2nd and 3rd marker and 7th and 8th marker + 1 st on each side of marker for armholes (= bind off 23-25-27-29 sts in each side). P next round, AT THE SAME TIME cast on 23-25-27-29 new (loose) sts over the bound off sts between 2nd and 3rd marker and 7th and 8th marker. When all sts are cast on again, there are 160-176-192-208 sts on needle.

Then work as follows: Work A.2 over all sts, AT THE SAME TIME inc 1 st on each side of sts with marker on every round with star (= 16 sts per inc round). Work A.2 2 times vertically = 288-304-320-336 sts. Piece measures approx. 56-58-62-64 cm / 22"-22 3/4"-24½"-25 1/4" in diameter.

Then work as follows: Keep sts between 2nd and 4th marker on needle, slip the remaining sts on a stitch holder = 72-76-80-84 sts on needle. Work in GARTER ST - see explanation above - back and forth over these sts, AT THE SAME TIME at the end of every row slip the last 2 sts on stitch holder (do not work them, turn). NOTE: Continue with inc on each side of the 3rd marker every 4th row. Continue until 32 sts remain on needle. Slip the last 32 sts on stitch holder.

Slip sts between 6th and 8th marker on circular needle size 5 mm / US 8, and work the same way as on left front piece.

Then K all sts from stitch holder from RS back onto circular needle size 5 mm / US 8 - pick up and twist yarn between every time st on stitch holder in each side is slipped on needle (i.e. between every other st to avoid holes in transition) = approx. 352-376-400-424 sts. Work 2 ridges. Loosely bind off with K from RS as follows: K 1, ((** insert right needle in between the first 2 sts on left needle (i.e. between sts on needle, not through sts), make 1 YO on right needle, pull YO forwards between sts and slip YO on left needle **, repeat from **-** 2 more times (= 3 new sts on left needle). * K first st on left needle, pass first st on right needle over last st worked *)), repeat from *-* 6 times in total and repeat from ((-)) along the entire jacket until 1 st remains, cut the yarn and pull it through last st.

Worked in the round on double pointed needles. Cast on 30-30-32-34 sts on double pointed needles size 5 mm / US 8 with 1 strand BabyAlpaca Silk and 1 strand Kid-Silk (= 2 strands). Work 4 ridges, then work in stockinette st. Insert 1 marker mid under sleeve. When piece measures 6 cm / 2 3/8'', inc 1 st on each side of marker under sleeve. Inc like this every 4-3½-3½-4 cm / 1½"-1 1/4"-1 1/4"-1½" a total of 7-9-10-10 times = 44-48-52-54 sts. Work until piece measures 35-40-44-48 cm / 13 3/4"-15 3/4"-17 1/4"-19", bind off. Make another sleeve.

Sew in sleeves.

This pattern has been corrected. .

Updated online: 19.09.2016
BACK: ...Then work as follows: Work A.2 over all sts, AT THE SAME TIME inc 1 st on each side of sts with marker on every round with star (= 16 sts per inc round). Work A.2 2 times vertically = 288-304-320-336 sts. Piece measures approx. 56-58-62-64 cm / 22\"-22 3/4\"-24½\"-25 1/4\" in diameter.
Updated online: 21.12.2016
New chart A.1 (all sizes)


symbols = K
symbols = P
symbols = 1 YO between 2 sts
symbols = slip 1 st as if to K, K 2 tog, psso
symbols = slip 1 st as if to K, K 1, psso
symbols = K 2 tog
symbols = inc round

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Children 27-12) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

signature-image signature

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

Each of our patterns has specific tutorial videos to help you.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (69)

country flag Paarnannguaq Zeeb wrote:

Hej Jeg er igang med at lave 6-8 år, men da jeg er færdig med forstykkerne og har taget ud hver mellem 2.maske mangler jeg stadigvæk omkring 40 stykker masker (jeg fik ikke 372 masker tilsidst) Hvad gør jeg forkert??? (Dvs. jeg har kun taget 44 masker ud da jeg strikkede maskerne ud fra tråden)

05.05.2023 - 15:23

DROPS Design answered:

Hei Paarnannguaq Litt usikker på hvor det blir feil hos deg, men har du husket å øke på hver side av den 3.merketråden på hver 4.pinne? mvh DROPS Design

08.05.2023 kl. 13:00

country flag Marine wrote:

Ce qui est assez compliqué dans cette video , c'est que vous ne mettez pas de marqueur de début on voit un fil vert et tout a coup un fil rouge et on ne sait pas quand celui ci a été mis . la dame commence le rang 17.... 2 mailles avant le fil vert ?? ne fallait il pas décaler le début des tours d'1 m à gauche d'abord ....on voit pas sur la video la rangé 16 !! merci de m'eclairer

23.10.2022 - 08:30

DROPS Design answered:

Bonjour Marine, le tour 17 commence au time code 14.35 (il est affiché en haut à droite); on commence par tricoter 1 maille endroit, puis le début du tour est décalé ici, juste avant le jeté, et on continue le diagramme comme indiqué. Bon tricot!

24.10.2022 kl. 10:37

country flag Lorraine STEPHENS wrote:

Need help understanding the left front itpiece in the drops 27-12 Alvina pattern. It says to keep sts between 2nd & 4th marker on needle and slip remaining sets on st holder = 80 sts on needle. This whole set of instructions is very confusing to me. Could someone explain it to me in more detail or is there a video that could show me

11.05.2022 - 02:20

DROPS Design answered:

Dear Mrs Stephens, to create the desired rounded shape at the top and bottom of each front piece, you will now work short rows over the stitches between the markers, ie keep the 80 sts on needle and work as before, but work 2 sts less at the end of every row (continue increasing on each side of the 3rd (left front piece)/7th (right front piece) marker on every 4th row) until 32 sts remain, put aside. After both front pieces are worked, you will pick up stitches all around the whole jacket: circle + front pieces - ca 400 sts and bind off with a picot edge. Happy knitting!

11.05.2022 kl. 08:42

country flag Cornelia Reinhard wrote:

Hello, Does this pattern exist in Spanish and/or German¿? And how can i get them¿? Thanks a lot and in advance of your reply Conni

25.04.2022 - 15:49

DROPS Design answered:

Dear Cornelia, you can select the language in a box under the photos of the pattern; it will tell you if the pattern has been translated to a specific language or not. In this case, the pattern is translated both in Spanish and German. Happy knitting!

25.04.2022 kl. 21:21

country flag Christiane wrote:

Setzt man folgendes wieder beim 1. Markierer an, oder strickt man das nach dem 2. Vorderteil einfach in Runden weiter? Und müsste es in der Klammer nicht nach jeder 2. M heißen? „Dann alle stillgelegten M in einer Hin-R re auf die Rundnadel Nr. 5 zurückstr, dabei jedes Mal zwischen den Übergängen den Querfaden auffassen und verschränkt auf die Nadel legen (d.h. nach jeder 2. R, um ein Loch in den Übergängen zu vermeiden)“

15.04.2022 - 17:14

DROPS Design answered:

Liebe Christiane, man kann nach dem 2. Vorderteil in Runden weiterstricken - und richtig, es sollte " jede 2. Masche" heißen, die Anleitung wird korrigiert, danke für den Hinweis. Viel Spaß, beim stricken!

19.04.2022 kl. 09:16

country flag Hirth wrote:

Wenn ich zwischen dem 2 und 3 Markierer Und zwischen dem 7und 8 Markierer abkette und später wieder anschlage wird das dich asymmetrisch? Das ganze sieht ziemlich schief aus ? Was mache ich denn falsch

01.03.2022 - 18:24

DROPS Design answered:

Liebe Frau Hirth, so bekommen Sie 2 "Löcher" für die Ärmel, dh Sie sollen die Maschen zwischen den Markierungen abketten und dann sofort bei der nächsten Runde diese Maschen wieder anschlagen. Die Armausschnitte sollen wie in der Maßskizze aussehen, dh mehr Maschen unten als oben am Hals. Viel Spaß beim stricken!

02.03.2022 kl. 09:24

country flag Marimar wrote:

Bonjour, Je suis en train de tricoter ce joli modèle en taille 3-5 ans . Mais je ne comprends pas les indications suivantes : "décaler le début des tours d'1 m à gauche d'abord tous les 2 tours, puis tous les 4 tours – c'est-à-dire que le début des tours est toujours avant le 1er jeté du diagramme pour qu'il soit moins visible. Le début des tours à la fin sera au milieu du 1er motif de A.1. " Pouvez vous m'éclairer ? Merci beaucoup

13.02.2022 - 21:10

DROPS Design answered:

Bonjour Marimar, pour que les "raccords" entre les tours dans la partie point mousse, on va commencer les tours en décalant le tour au niveau du 1er jeté de A.1 - regardez la vidéo, au time code 14:36 environ, on va montrer cette transition. Bont ricot!

14.02.2022 kl. 10:36

country flag Angeline Loh wrote:

Hi there thank you for the beautiful pattern. I have now completed both fronts and knitted right around incorporating the stitches on stitch holders. I watched the video you provided another knitter and picked up, twisted and k2tog so there were no increases when adding the twisted stitches. However I have gone right round and now can't get 376 stitches. I am 44 stitches short. Even if I did not do k2tog I can't get 44 sts more. Please help! How do I get from 304 before the fronts to 376?

17.01.2022 - 22:44

DROPS Design answered:

Dear Mrs Loh, you should pick up these stitches as explained in the video, but they should be worked as stitches to get the correct number of sts and avoid the sides on front piece being tight, ie you should pick up approx. 1 st between each set of 2 sts a total of 18 times then you should get the correct number of sts: 152+76 sts on each front piece + 18 sts picked up on each side of each front piece = 376 sts. Happy knitting!

19.01.2022 kl. 09:59

country flag Caro wrote:

Guten Tag, leider verstehe ich den Teil nicht beim Muster stricken mit dem Rundenbeginn verschieben und der dann immer rechts vor dem ersten Umschlag beginnen soll. Ich hab auch schon im Internet gesucht aber nichts dazu gefunden. In Runde 16 fange ich ja an mit einer linken und dann 9 rechten Maschen und 2 linken. Heißt das jetzt wenn ich den rundenanfang versetzen soll muss ich dann mit den 9 rechten anfangen? Oder wie ist das gemeint? Und ab wann mach ich das dann nur in jeder 4. Runde?

14.01.2022 - 16:23

DROPS Design answered:

Liebe Caro, wenn Sie der 1. Umschlag in A.1 bei der 21. Reihe in A.1 ist es einfacher, daß die Runden vor diesem Umschlag anfangen, so sehen die Krausrippen besser aus. Dieses Video zeigt bei 14:36 Anfang Runde 17 und wie man der Markierer nach der 1. Masche verschiebt. Viel Spaß beim stricken!

19.01.2022 kl. 10:37

country flag Nini Tielle wrote:

Ik zie op de foto dat de gaatjes bij A2 in het tricot gedeelte zit. Bij de teltekening zitten de gaatjes in het ribbel gedeelte. Zie ik dit verkeerd?

30.12.2021 - 21:42

DROPS Design answered:

Dag Nini,

Het telpatroon wordt in de rondte gebreid en het deel waar je steeds recht breit is dus het deel in tricotsteek. Hier zitten de gaatjes. Aan de bovenkant van A.2 zie je aan aantal naalden in averecht. Deze zorgen ervoor dat er ribbels ontstaan en hier zitten geen gaatjes.

06.01.2022 kl. 10:13

Post a comment to pattern DROPS Children 27-12

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

From the #dropsfan gallery


Diana, Russian Federation