DROPS Melody
DROPS Melody
71% Alpaca, 25% Wool, 4% Polyamide
from 6.35 $ /50g
Get the yarn to make this pattern from 31.75$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

Rhythmic Rain Jacket

Knitted jacket in DROPS Melody. Piece is knitted top down with round yoke, edges in rib and vents in the side. Size: S - XXXL

Highlight Size:
DROPS 228-41
DROPS design: Pattern ml-071
Yarn group D
----------------------------------------------------------

SIZE:
S - M - L - XL - XXL – XXXL

Finished measurements:
Chest measurements: 94-100-106-116-130-144 cm = 37"-39⅜"-41¾"-45¾"-51¼"-56½"
Full length: 58-60-62-64-66-68 cm = 22¾"-23⅝"-24⅜"-25¼"-26"-26¾"
All measurements in charts are in cm.

MATERIALS:
DROPS MELODY from Garnstudio (belongs to yarn group D)
250-300-300-350-350-400 g color no 02, fog

DROPS BUTTON, Marble NO 630: 6-6-7-7-8-8 pieces

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 8 MM = US 11 : Length 40 and 80 cm = 24" and 32".
DROPS CIRCULAR NEEDLE SIZE 6 MM = US 10: Length: 80 cm = 32"
DROPS DOUBLE POINTED NEEDLES SIZE 8 MM = US 11
DROPS DOUBLE POINTED NEEDLES SIZE 6 MM = US 10
The technique MAGIC LOOP can be used – you then only need circular needle of 80 cm = 32" in each size.

KNITTING GAUGE:
12 stitches in width and 14 rows vertically in stockinette stitch = 10 x 10 cm = 4" x 4".
NOTE! Remember that needle size is only a suggestion. If you have too many stitches on 10 cm = 4" switch to larger needles. If you have too few stitches on 10 cm = 4" switch to smaller needles.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Melody
DROPS Melody
71% Alpaca, 25% Wool, 4% Polyamide
from 6.35 $ /50g
Get the yarn to make this pattern from 31.75$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
----------------------------------------------------------
EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.

INCREASE TIP (evenly):
To calculate how to increase evenly, use the total number of stitches on row (e.g. 142 stitches), subtract the band (= 10 stitches) and divide the remaining stitches by number of increases to be done (e.g. 11) = 12.
In this example increase by making 1 yarn over after every 12th stitch. On next row work yarn over twisted to avoid hole.

DECREASE TIP (applies to sleeves):
Decrease 1 stitch on each side of marker thread as follows: Work until 3 stitches remain before marker thread, knit 2 together, knit 2 stitches (marker thread is between these stitches), slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 2 stitches decreased).

BUTTONHOLES:
Decrease for buttonholes on right band (when garment is worn). Decrease from right side when 3 stitches remain on row as follows: Make 1 yarn over, knit the next 2 stitches together, knit last stitch. On next row (wrong side) knit the yarn over to make a hole.
Decrease first buttonhole when rib in neck measures approx. 2 cm = ¾". Then bind off the next 5-5-6-6-7-7 buttonholes approx. 9-9-8-8-8-8 cm = 3½"-3½"-3⅛"-3⅛"-3⅛"-3⅛" apart.

BIND-OFF TIP:
To avoid a tight bind-off edge when binding off, you may use a larger needle. If this still is too tight make 1 yarn over after approx. every 4th stitch while binding off (bind off yarn overs as stitches).

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

JACKET - SHORT OVERVIEW OF THE PIECE:
Work neck edge and yoke back and forth on circular needle from mid front, work top down. Increase first stitches in rib after neck edge, then increase stitches in stockinette stitch. Now divide yoke for body and sleeves. Work body back and forth on circular needle, top down. Work sleeves in the round on double pointed needles/a short circular needle, top down.

NECK EDGE:
Cast on 71-73-75-79-85-87 stitches (including 5 band stitches in each side) on circular needle size 6 MM = US 10 with DROPS Melody.
Purl 1 row from wrong side. Work next row as follows from right side: 5 band stitches in GARTER STITCH - see explanation above, rib (= knit 1, purl 1) until 6 stitches remain, knit 1 and finish with 5 band stitches in garter stitch. Work BUTTONHOLES on right band - read explanation above. Work rib like this for 5 cm = 2". Insert 1 marker in piece inside 5 band stitches and measures from here.

YOKE:
Continue with rib and 5 band stitches in garter stitch in each side. When piece measures 5 cm = 2" from marker, increase as follows:
Increase 1 stitch in all purl sections, increase by making a yarn over at the beginning of all purl sections = 101-104-107-113-122-125 stitches.
Continue as follows - from wrong side: 5 band stitches in garter stitch, * purl 1, knit 2 *, work from *-* until 6 stitches remain, purl 1 and finish with 5 band stitches in garter stitch, knit yarn overs twisted on first row to avoid holes.
When piece measures 10 cm = 4" from marker, increase 1 stitch in all purl sections, increase by making a yarn over at the end of all purl sections = 131-135-139-147-159-163 stitches.
Work as follows - from wrong side: 5 band stitches in garter stitch, * purl 1, knit 3 *, work from *-* until 6 stitches remain, purl 1 and finish with 5 band stitches in garter stitch, knit yarn overs twisted on first row to avoid holes.
Continue until piece measures 13 cm = 5⅛" from marker.
Switch to circular needle size 8 MM = US 11.
Knit 1 row from right side while increasing 11-19-21-23-25-31 stitches evenly - read INCREASE TIP = 142-154-160-170-184-194 stitches.
Work in stockinette stitch with 5 band stitches in garter stitch in each side of piece. When piece measures 15 cm = 6" from marker, increase 10 stitches evenly. Increase like this every 2½-3-2½-2½-2-2 cm = 1"-1⅛"-1"-1"-¾"-¾" 4-4-5-6-7-8 times in total = 182-194-210-230-254-274 stitches.
REMEMBER THE KNITTING GAUGE!
Continue with stockinette stitch and in garter stitch over bands until piece measures approx. 25-27-28-30-32-34 cm = 9¾"-10⅝"-11"-11¾"-12½"-13⅜" from marker.
Now divide yoke for body and sleeves from right side as follows:
Knit 30-32-34-37-41-45 (= front piece), slip the next 36-38-42-46-50-52 stitches on 1 stitch holder for sleeve, cast on 6 new stitches on row (= in the side under sleeve), knit 50-54-58-64-72-80 (= back piece), slip the next 36-38-42-46-50-52 stitches on 1 stitch holder for sleeve, cast on 6 new stitches on row (= in the side under sleeve) and knit the remaining 30-32-34-37-41-45 stitches (= front piece). Finish body and sleeves separately. NOW MEASURE THE PIECE FROM HERE!

BODY:
= 122-130-138-150-166-182 stitches. Continue with stockinette stitch and 5 band stitches in garter stitch in each side towards mid front.
Work until piece measures approx. 13-13-14-14-14-14 cm = 5⅛"-5⅛"-5½"-5½"-5½"-5½" from division, adjust so that last row is from wrong side (or desired length, approx. 16 cm = 6¼" remain until finished measurements). Now divide the piece and finish each part separately to make a vent in each side. Slip the first and the last 33-35-37-40-44-48 stitches on a stitch holder = 56-60-64-70-78-86 stitches on needle (= back piece).

BACK PIECE:
Knit 1 row from right side while increasing 23-25-25-27-31-33 stitches evenly = 79-85-89-97-109-119 stitches.
Switch to circular needle size 6 MM = US 10 and work next row – from wrong side as follows: 2 stitches in garter stitch, * purl 1, knit 1 *, repeat from *-* until 3 stitches remain, purl 1 and 2 stitches in garter stitch. Work rib like this for 16 cm = 6¼". Bind off with knit over knit and purl over purl - read BIND-OFF TIP.

LEFT FRONT PIECE:
Slip stitches from left front piece back on needle (= 33-35-37-40-44-48 stitches). Knit 1 row from right side while increasing 11-11-13-14-16-16 stitches evenly = 44-46-50-54-60-64 stitches.
Switch to circular needle size 6 MM = US 10 and work next row – from wrong side as follows: 2 stitches in garter stitch, * purl 1, knit 1 *, repeat from *-* until 6 stitches remain, purl 1 and 5 band stitches in garter stitch. Work rib like this for 16 cm = 6¼". Bind off with knit over knit and purl over purl - remember BIND-OFF TIP.

RIGHT FRONT PIECE:
Slip stitches from right front piece back on needle (= 33-35-37-40-44-48 stitches). Knit 1 row from right side while increasing 11-11-13-14-16-16 stitches evenly = 44-46-50-54-60-64 stitches.
Switch to circular needle size 6 MM = US 10 and work next row as follows – from wrong side and mid front: 5 band stitches in garter stitch * purl 1, knit 1 *, repeat from *-* until 3 stitches remain, purl 1 and 2 stitches in garter stitch. Work rib like this for 16 cm = 6¼". Bind off with knit over knit and purl over purl - remember BIND-OFF TIP.
Jacket measures 58-60-62-64-66-68 cm = 22¾"-23⅝"-24⅜"-25¼"-26"-26¾" from shoulder and down.

SLEEVE:
Slip the 36-38-42-46-50-52 stitches from stitch holder in one side of piece on double pointed needles/a short circular needle size 8 MM = US 11 and pick up 1 stitch in each of the 6 new stitches cast on under sleeve = 42-44-48-52-56-58 stitches.
Insert 1 marker thread mid under sleeve, i.e. in the middle of the 6 stitches that were cast on under sleeve. Move the marker thread upwards when working; it should be used for decrease mid under sleeve. Begin round at the marker thread and work stockinette stitch in the round.
When sleeve measures 2 cm = ¾" from division, decrease 2 stitches mid under sleeve - read DECREASE TIP. Decrease as follows every 8-8-4½-3½-2½-2½ cm = 3⅛"-3⅛"-1⅝"-1¼"-1"-1" 4-4-6-7-8-8 times in total = 34-36-36-38-40-42 stitches.
Work without decreases until sleeve measures 29-28-27-26-23-22 cm = 11⅜"-11"-10⅝"-10¼"-9"-8¾" from division (approx. 12 cm = 4¾" remain before finished measurements, try the sweater on and work to desired length).
Knit 1 round while increasing 6 stitches evenly = 40-42-42-44-46-48 stitches. Switch to double pointed needles size 6 MM = US 10. Work rib in the round = knit 1/purl 1 for 12 cm = 4¾". Bind off with knit over knit and purl over purl - remember BIND-OFF TIP.
Sleeve measures approx. 41-40-39-38-35-34 cm = 16⅛"-15¾"-15¼"-15"-13¾"-13⅜" from division.
Work the other sleeve the same way.

ASSEMBLY:
Sew the buttons on to left front piece.

Diagram

All measurements in charts are in cm.

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.  

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 228-41

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (39)

country flag Susan Gale Gumbleton wrote:

Hi I couldn’t work out how many balls needed for XL cardigan?

19.07.2024 - 11:56

DROPS Design answered:

Dear Susan, for size XL you need 350gr of Melody. Since each ball of Melody contains 50gr you need 7 balls of Melody. Happy knitting!

21.07.2024 - 19:24

country flag Stacey wrote:

Where it says cast on 87stitches including 5 stitches garter band , dose this mean 87 stitches in total or 97 stitches cast on ?

12.07.2024 - 09:14

DROPS Design answered:

Hi, you have to cast on 87 stitches (garter bandes are included). Happy knitting!

12.07.2024 - 13:35

country flag Katia Loraini wrote:

O que é carreira liga pelo avesso?

07.07.2024 - 00:44

DROPS Design answered:

Bom dia, É uma volta em tricô que se tricota no lado do avesso da peça.

02.08.2024 - 11:09

country flag Betul wrote:

I made M size and only use 4 yarns, 200 gr. Measurements are right but I couldn't understand how did it happen.

05.06.2024 - 19:23

country flag Glynne wrote:

A wonderfullu versitle patter. I have made this for a friend with square shoulders, for myself with short slanting shoulders and for my husband. On each body shape this garment drapes beautifully. Thank you. Ngā mihi nui

01.04.2024 - 10:16

country flag Nichol wrote:

Is the 12 sts to 10x10 cm on the 6 mm or 8 mm needles? It doesn't state in the pattern. Thanks

04.02.2024 - 02:52

DROPS Design answered:

Dear Nichol, the 6mm needles are only used for casting on and rib sections. You work the gauge with the main needle, that is, the 8mm needles. Happy knitting!

04.02.2024 - 23:10

country flag Jette wrote:

OBS: Husk at pinde nr kun er vejledende. Får du for mange masker på 10 cm, skift til tykkere pinde. Får du for få masker på 10 cm, skift til tyndere pinde. Hvad menes der?

08.01.2024 - 13:12

country flag Anne De Keersmaeker wrote:

Bonjour, je suppose qu'après les côtes tricotées avec les aiguilles 6 on passe aux aiguilles 8 ? Merci Anne

01.12.2023 - 19:33

DROPS Design answered:

Bonjour Mme De Keersmaeker, pas exactement, vous changerez pour l'aiguille circulaire 8 quand les côtes de l'empiècement seront terminées (l'ouvrage mesure 13 cm depuis le marqueur), autrement dit, au 1er rang jersey après les côtes. Bon tricot!

04.12.2023 - 07:43

country flag Irene Skatvedt Ellefsrød wrote:

Under erme på denne oppskriften må det være en feil på mål fra deling, virker som ant. cm. er feil vei, minste størrelsen har lengst erme.

30.11.2023 - 12:58

DROPS Design answered:

Hei Irene. Jo, målene stemmer. Det er kortere mål i de større størrelsene pga bredere skuldervidde og lengre ermetopp. mvh DROPS Design

04.12.2023 - 10:56

country flag Gwen Meythaler wrote:

Is this pattern available in English?

01.11.2023 - 16:55

DROPS Design answered:

Hi Gwen, Yes, you click on the box under the photograph (endre språk) and change to your chosen language. Happy crafting!

02.11.2023 - 06:55