DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g

Order

Order

Get the yarn to make this pattern from 25.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Prairie Winter

Knitted hat and shawl with garter stitch and cables in DROPS Air.

DROPS 204-49

#prairiewinterset

DROPS design: Pattern ai-236
Yarn group C or A + A
----------------------------------------------------------

FOR THE ENTIRE SET:

SIZE:
S/M – L/XL
Head circumference: 54/56 - 58/60 cm = 21¼"/22" – 22¾"/23⅝"

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
200-200 g color 02, wheat

HAT:

SIZE:
S/M – L/XL
Head circumference: 54/56 - 58/60 cm = 21¼"/22" – 22¾"/23⅝"

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
50-100 g color 02, wheat

KNITTING GAUGE:
17 stitches in width and 22 rows vertically in stockinette stitch = 10 x 10 cm = 4" x 4".

NEEDLES:
DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE SIZE 5 mm = US 8: Length 40 cm = 16".
DROPS CIRCULAR NEEDLE SIZE 4 mm = US 6: Length 40 cm = 16" for rib.
DROPS CABLE NEEDLE - for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4" switch to larger needles. If you have too few stitches on 10 cm = 4" switch to smaller needles.

SHAWL:

SIZE:
Height: Measured along the middle = approx. 50 cm = 19¾"
Width: Measured along the top side from side to side = approx. 160 cm = 63".

MATERIALS:
DROPS AIR from Garnstudio (belongs to yarn group C)
150 g color 02, wheat

KNITTING GAUGE:
12 stitches in width and 26 rows vertically in garter stitch = 10 x 10 cm = 4" x 4".

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 8 mm = US 11: Length 80 cm = 32".
DROPS CABLE NEEDLE - for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4" switch to larger needles. If you have too few stitches on 10 cm = 4" switch to smaller needles.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

You might also like...

Women Accessories Big Shawls Hats Shawls Beanies bottom up cable garter stitch

DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g

Order

DROPS Needles & Hooks

Order

Get the yarn to make this pattern from 25.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. Convert from inches to cm here. There are different terms for crocheting in American and British English. If this pattern includes crochet, convert "crochet terms" here. See this pattern in British English here.

----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

GARTER STITCH (worked in the round):
1 ridge vertically = 2 rounds, i.e. knit 1 round and purl 1 round.

GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.

PATTERN:
Hat: See diagram A.1 to A.3 - choose diagram for your size.
Shawl: See diagrams A.4 and A.5.
Diagrams show all rows in pattern seen from the right side.

INCREASE TIP (evenly):
To calculate how to increase evenly, use the total number of stitches on row (e.g. 88 stitches) and divide stitches by number of increases to be done (e.g. 22) = 4.
In this example increase by making 1 yarn over after every 4th stitch. On next round work yarn overs twisted to avoid holes.

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

HAT - SHORT OVERVIEW OF THE PIECE:
Worked in the round on circular needle. Switch to double pointed needles when needed.

HAT:
Cast on 88-92 stitches on circular needle size 4 mm = US 6 with Air. Knit 1 round. Then work rib (= knit 2/purl 2) for 3 cm = 1⅛". Work 1 ridge in GARTER STITCH in the round - read explanation above AT THE SAME TIME on 1st round increase 22-23 stitches evenly - read INCREASE TIP = 110-115 stitches. Switch to circular needle size 5 mm = US 8. Work A.1 - choose diagram for your size (= 22-23 stitches) 5 times on round. REMEMBER THE KNITTING GAUGE! When A.1 has been worked vertically, work A.2 over A.1 until piece measures 19-21 cm = 7½"-8¼", adjust after 1 whole repetition of A.2 vertically (6 cm = 2⅜" now remain until finished measurements). Now work and decrease according to diagram A.3 - choose diagram for your size (= 5 repetitions on round). When A.3 has been worked 1 time vertically, there are 30-35 stitches on round. Knit 2 and 2 stitches together on round (in size L/XL knit the last stitch on round together with the first stitch on next round) = 15-17 stitches. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. The hat measures approx. 25-27 cm = 9¾"-10⅝" vertically.

----------------------------------------------------------

SHAWL - SHORT OVERVIEW OF THE PIECE:
Worked back and forth on circular needle, from tip up.

SHAWL:
Cast on 3 stitches on circular needle size 8 mm = US 11 with Air. Then work as follows:
ROWS 1-2: Knit 1, 1 yarn over and knit the rest of row.
ROWS 3-4: Knit 1, 1 yarn over, knit 1, 1 yarn over and knit the rest of row.
REMEMBER THE KNITTING GAUGE! Repeat rows 1 -4 until there are 21 stitches on needle. Now work A.4 over the middle 15 stitches, and work garter stitch over the remaining stitches on row, AT THE SAME TIME continue increase the same way as before (i.e. As rows 1-4). When A.4 has been worked vertically, 2 stitches have been increased in diagram. Now work A.5 over stitches in A.4 and continue increases as before until piece measures approx. 50 cm = 19¾" in the middle (or to desired length) - adjust to finish after 3rd row in A.5. Loosely bind off with double yarn.

Diagram

All measurements in charts are in cm.

	= knit from the right side, purl from the wrong side
	= purl from the right side, knit from the wrong side
	= slip 3 stitches on cable needle behind piece, knit 3, knit 3 from cable needle
	= slip 3 stitches on cable needle in front of piece, knit 3, knit 3 from cable needle
	= knit 2 together
	= slip 1 stitch, knit 1 and pass slipped stitch over
	= purl 2 together
	= between 2 stitches make 1 yarn over, on next row purl yarns over twisted to avoid holes
	= this square is not a stitch, go directly to next symbol in diagram

© 1982-2025 DROPS Design A/S We reserve all rights. This document, including all its sub-sections, has copyrights.
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.

Each of our patterns has specific tutorial videos to help you.

These step-by-step tutorials might also help you:

Do you have a question? See a list of frequently asked questions (FAQ)

Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

What size should I knit?

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Why does my garment pill?

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Have you finished this pattern?
Tag your pictures with #dropspattern #prairiewinterset or submit them to the #dropsfan gallery.

Comments / Questions (14)

Lambert wrote:

J’ai regardé des vidéo et trouvé la solution à mon problème.

10.12.2024 - 14:17

Pourriez vous m’expliquer comme on peut tricoter un châle avec une aiguille circulaire ? J’adore vos modèles mais je ne comprends pas tjrs vos explications. Merci pour votre aide

10.12.2024 - 14:03

DROPS Design answered:

Bonjour Mme Lambert une aiguille circulaire peut servir à tricoter en rond mais aussi en rangs; dans cette vidéo, nous montrons comment tricoter en allers et retours sur aiguille circulaire; retrouvez plus d'infos sur les aiguilles circulaires ici. Et si vous avez d'autres questions, n'hésitez pas à utiliser cette rubrique. Bon tricot!

11.12.2024 - 08:33

Céline Boudjelal wrote:

Bonjour, Je vais commencer ce modèle de châle et j'ai une question pour les augmentations: on augmente donc de 1 maille les rangs 1 et 2 et de 2 mailles les rangs 3 et 4, c'est bien ça ? Merci d'avance pour vos explications. Bien cordialement,

06.02.2021 - 23:10

Bonjour Mme Boudjelal, tout à fait, vous augmentez 1 m au début des rangs 1 et 2 (= 1 m de chaque côté) et 2 m au début des rangs 3 et 4 (= 2 m de chaque côté). Bon tricot!

08.02.2021 - 08:55

Janina wrote:

Czesc mam pytanie , czy na lewej stronie robotki czyli w rzedach parzystych tez mam robic dwa narzuty ? dziekuje za odpowiedz

19.12.2020 - 12:29

Witaj Janino! Narzuty są w schemacie A.4 i są wykonywane tylko w rzędach nieparzystych, czyli na prawej stronie robótki. W następnym rzędzie (na lewej stronie robótki) przerobić oczko przekręcone w miejscu narzutu na lewo, aby uniknąć dziur. Pozdrawiamy!

19.12.2020 - 19:12

Mary Chàvez wrote:

Me pueden decir de favor cuáles son las lanas tipo C, muchas gracias de antemano saludos

12.08.2020 - 04:57

Hola Mary Chávez. https://www.garnstudio.com/yarn-groups.php?cid=23. Este es el link donde puedes consultar los grupos de las lanas DROPS.

16.08.2020 - 14:24

Neda wrote:

Does this pattern come with written instructions instead of chart, i have noticted most of your patterns are charted regards neda

25.04.2020 - 23:51

Dear Neda, unfortunately we do not have a written out pattern for this piece. We think charted patterns are better not only because they are universal and can be "read" in every language, but also because they not only show you the very next step, but also how stitches androws relate to each other. We so have a lesson on how to read knitting harts / diagrams here, and don't forget, if you get stuck, you can always ask for help in the store in person, or even over the phone, where you bought your DROPS yarn from. Happy Knitting!

26.04.2020 - 20:33

Mari wrote:

Hei! Skal sjalet strikkes med dobbel tråd?

13.12.2019 - 12:25

Hej Mari, både hue og sjal skal strikkes med enkel tråd, men sjalet strikkes meget løsere på tykke pinde. God fornøjelse!

17.12.2019 - 12:08

Stefania wrote:

Buongiorno. E' corretto ripetere i ferri da 1 a 4? Avrei aumenti irregolari, due ferri con un aumento, due ferri con due aumenti, due ferri con un aumento ecc... non saranno da ripetere solo 3 e 4? inoltre i gettati dovrebbero lasciare un buco che nella foto non vedo (e che sarebbe irregolare lavorando i ferri da 1 a 4). I gettati anno lavorati a dritto o dritto ritorto? Grazie

18.11.2019 - 15:23

Buonasera Stefania, le istruzioni sono corrette. I gettati si lavorano seguendo la lavorazione dei ferri indicati, quindi a diritto. Buon lavoro!

19.11.2019 - 22:48

H Bles wrote:

Het telpatroon drukt niet af

16.11.2019 - 07:01

Helen Medin wrote:

N¨r kommer oppskrfift på denne sjal?

11.11.2019 - 08:49

Hei Helen. God nyheter, det vil bli publisert i morgen (12.11.2019). God Fornøyelse!

11.11.2019 - 12:07

Prairie Winter

Knitted hat and shawl with garter stitch and cables in DROPS Air.

You might also like...

Pattern instructions

Diagram

How to read knitting diagrams

How to increase/decrease evenly!

How to measure your tension/gauge

Can I adapt a pattern for circular needles into straight needles?

How to change yarns or yarn amounts

How to choose yarn!

How can I get help with a DROPS pattern?

How to cast on

How to knitt stitches

How to purl stitches

How to cast off from the right side

Post a comment to pattern DROPS 204-49

Comments / Questions (14)

Prairie Winter

Knitted hat and shawl with garter stitch and cables in DROPS Air.

Diagram explanations

Do you need help with this pattern?

@dropsdesign on Instagram

	DROPS Air mix 65% Alpaca, 28% Polyamide, 7% Wool	6.45 $ /50g	Order
	DROPS Air uni colour 65% Alpaca, 28% Polyamide, 7% Wool	6.45 $ /50g	Order

	DROPS Air mix 65% Alpaca, 28% Polyamide, 7% Wool 6.45 $ /50g Order
	DROPS Air uni colour 65% Alpaca, 28% Polyamide, 7% Wool 6.45 $ /50g Order