Agnes Sweater by DROPS Design

Knitted sweater for kids in DROPS Sky. Piece is knitted top down with round yoke, lace pattern, stockinette stitch and garter stitch. Size 3-12 years

DROPS design: Pattern sk-003-bn
Yarn group B
----------------------------------------------------------

SIZE:
3/4 - 5/6 - 7/8 - 9/10 - 11/12 years
Sizes equivalent to approx. height of child in cm:
98/104 - 110/116 - 122/128 - 134/140 - 146/152
Sizes equivalent to approx. height of child in feet:
3ft3/3ft5 – 3ft7/3ft9 – 4ft/4ft2 – 4ft5/4ft7 – 4ft9/4ft12

Finished measurements:
Chest measurements: 64-68-74-76-78 cm = 25 1/4”-26 3/4”-29 1/8”-30”-30 3/4”
Full length: 34-38-42-46-50 cm = 13 3/8”-15”-16 1/2”-18”-19 3/4”

MATERIALS:
DROPS SKY from Garnstudio (belongs to yarn group B)
150-150-200-200-200 g color 13, denim blue

KNITTING GAUGE:
21 stitches in width and 28 rows vertically in stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4 mm = US 6
DROPS CIRCULAR NEEDLE SIZE 4 mm = US 6, length 40 and 60 cm = 16” and 24”.
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4” switch to larger needles. If you have too few stitches on 10 cm = 4” switch to smaller needles.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!

74% Alpaca, 18% Polyamide, 8% Wool
from 8.40 $ /50g
DROPS Sky uni colour DROPS Sky uni colour 8.40 $ /50g
Purple Sheep Yarns
Order
DROPS Sky mix DROPS Sky mix 8.40 $ /50g
Purple Sheep Yarns
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

GARTER STITCH (worked in the round):
1 ridge = 2 rounds. Knit 1 round and purl 1 round.

PATTERN:
See diagram A.1. Choose diagram for your size. Diagrams show all rounds in pattern seen from the right side.

INCREASE TIP-1 (evenly):
To calculate how to increase evenly, use the total number of stitches on row (e.g. 72 stitches) and divide stitches by number of increases to be done (e.g. 17) = 4.2.
In this example increase by making 1 yarn over after every 4th stitch. On next round work yarn over twisted to avoid hole.

INCREASE TIP-2 (applies to sides of body):
Work until 1 stitch remains before marker thread, 1 yarn over, knit 2 (marker thread is in the middle of these stitches), 1 yarn over = 2 stitches increased. On next round knit yarn over twisted to avoid holes. Then work the new stitches in stockinette stitch.

DECREASE TIP (applies to sleeves):
Decrease 1 stitch on each side of marker thread as follows: Work until 3 stitches remain before marker thread, knit 2 together, knit 2 stitches (marker thread is between these stitches), slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked = 2 stitches decreased.

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

SWEATER - SHORT OVERVIEW OF THE PIECE:
Worked in the round on circular needle, top down. Divide for body and sleeves, work body in the round on circular needle. Work sleeves in the round on double pointed needles/a short circular needle.

YOKE:
Cast on 62-66-70-76-82 stitches on circular needle size 4 mm = US 6 with Sky. Work 2 ridges in GARTER STITCH - see explanation above. Knit 1 round while increasing 16-18-20-22-23 stitches evenly on round - READ INCREASE TIP! = 78-84-90-98-105 stitches.
Purl 1 round. Insert a marker in this round and measure from here. On next round work according to diagram A.1 (choose diagram for correct size) 13-14-15-14-15 times on round. REMEMBER THE KNITTING GAUGE!
When digram A.1 has been worked vertically, there are 208-224-240-252-270 stitches on round. On next round increase 4-4-2-2-4 stitches evenly on round = 212-228-242-254-274 stitches.
Then work in stockinette stitch until piece measures approx. 15-15-16-17-18 cm = 6”-6”-6 1/4”-6 3/4”-7” from marker. Work next round as follows:
Knit 62-66-70-75-75 stitches (= back piece), slip the next 44-48-51-53-62 stitches on a stitch holder (= sleeve), cast on 6 new stitches under the sleeve, knit 62-66-70-74-75 (= front piece), slip the next 44-48-51-53-62 stitches on a new stitch holder (= the other sleeve) and cast on 6 new stitches under sleeve.

BODY:
There are now 136-144-152-160-162 stitches on round. NOW MEASURE PIECE FROM HERE! Insert 1 marker thread in the middle of the 6 new stitches cast on. Work in stockinette stitch in the round. When piece measures 3 cm = 1 1/8”, increase 1 stitch on each side of each marker (= 4 stitches increased) - read INCREASE TIP-2! Repeat increase every 3-4½-5½-6½-7½ cm = 1 1/8”-1 3/4”-2 1/8”-2 1/2”-3” 3 times in total = 148-156-164-172-174 stitches on round. Then work as before until piece measures approx. 15-17-20-23-26 cm = 6"-6 3/4"-8"-9"-10 1/4" (or to desired length, there is approx. 2 cm = 3/4" until finished measurements). Work in garter stitch for 2 cm = 3/4”. Loosely bind off. Cut and fasten the yarn.

SLEEVE:
Slip stitches from on stitch holder back on a short circular needle/double pointed needles size 4 mm = US 6 (= 44-48-51-53-62 stitches), pick up 1 stitch in each of the 6 stitches cast on on body (= 50-54-57-59-68 stitches). Insert 1 marker thread in the middle of these 6 stitches. Work in stockinette stitch in the round until sleeve measures 3 cm = 1 1/8”. Now decrease 1 stitch on each side of marker thread - read DECREASE TIP! Continue in stockinette stitch and repeat decrease every 4-4-4-4-3½ cm = 1 1/2”-1 1/2”-1 1/2”-1 1/2”- 1 2/4” until decrease has been done 5-6-7-8-10 times in total = 40-42-43-43-48 stitches on needle. Work in stockinette stitch until sleeve measures 23-28-31-35-38 cm = 9”-11”-12 1/4”-13 3/4”-15” in total.
Work in garter stitch for 2 cm = 3/4”. Loosely bind off. Cut and fasten the yarn.

Work the other sleeve the same way.

This pattern has been corrected. .

Updated online: 10.04.2019
Correction - BODY: Then work as before until piece measures approx. 15-17-20-23-26 cm = 6"-6 3/4"-8"-9"-10 1/4" (or to desired length, there is approx. 2 cm = 3/4" until finished measurements).

Diagram

All measurements in charts are in cm.

= knit
= purl
= knit 2 together
= between 2 stitches make 1 yarn over, knit yarn over on next round. It should make a hole.
= between 2 stitches make 1 yarn over, work yarn over twisted on next round. It should not make a hole.
= slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked
= slip 1 stitch knitwise, knit 2 stitches together, pass slipped stitch over stitches worked together


Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Children 34-10) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (21)

Donatella Bernardi 26.03.2020 - 13:42:

Buongiorno! Vorrei eseguire questo modelli per mia figlia, però inserendo i ferri accorciati, dietro; è possibile? se si, in che punto della lavorazione li inserisco?

DROPS Design 26.03.2020 kl. 15:03:

Buongiorno Donatella. Sì, è possibile aggiungere dei ferri accorciati. Li dovrebbe inserire prima di iniziare a lavorare il diagramma A1. Buon lavoro!

Patricia 26.03.2020 - 11:49:

Bonjour Je trouve superbe ce modèle. Ne serait t'il pas possible de le décliner en taille adulte ? Merci beaucoup

DROPS Design 26.03.2020 kl. 15:14:

Bonjour Patricia, vous le trouverez en version pull manches longues ou bien gilet manches longues ou bien encore gilet manches courtes en cliquant sur les vignettes ou les liens ci-dessus. Bon tricot!

Judith 04.02.2020 - 14:53:

Ich möchte 110/116 Stricken. 66m anschlagen und zur Runde schließen. Das sind 31cm (bei einer Maschenprobe von 21m=10cm). Da passt der Kopf aber nicht durch. Wo liegt mein Fehler?

Irma DiLullo 10.01.2020 - 15:50:

Hello I can't find the key & Abbreviations for the sweater Diagram. Also, is there as explanation on how to read the Diagram. Thank you

Marta 23.12.2019 - 10:19:

Hola el patrón se teje una vuelta del derecho, y otra del revés? , es que yo cuando tejo en agujas circulares el p. Jersey siempre tejo del derecho

DROPS Design 04.01.2020 kl. 00:33:

Hola Marta. La parte del jersey en punto musgo se teje 1 vuelta de derecho, 1 vuelta de revés.; la parte en punto jersey se teje todas las vueltas de derecho. Todo el jersey se trabaja en redondo con una aguja circular.

Michele ZUBER 06.12.2019 - 15:26:

Bonjour, taille 9/10ans en laine Sky. Pour l empiècement on le démarre a 98 mailles et on répète A1 14 fois avec les augmentations successives on arrive a 254 mailles (98+14+14+14+14) or il est écrit :vous avez 252 mailles, augmentez au tour suivant de 2 mailles pour avoir 254. Est ce une erreur? Merci

DROPS Design 06.12.2019 kl. 16:08:

Bonjour Mme Zuber, en taille 9/10 ans, on commence effectivement par 98 m et on tricote 14 x les 7 m de A.1 (= 7x14= 98 m), dans A.1, on va augmenter 11 m au total (cf jetés en noir = 5ème symbole), on aura ainsi 18 m quand A.1 est terminé, soit 18 m x 14 = 252 m. Après A.1, on tricote 1 tour end au augmentant 2 m = 254 m. Bon tricot!

Carrie 19.11.2019 - 07:59:

When casting on the 6 stitches under the sleeve, do we then join those 6 stitches to the body of the work and include them in the round or are those 6 stitches separate from the body? Also, the stitch count doesn’t add up properly for the size 9/10. 75 + 74 + 53 + 53 = 255, not 254 like the pattern says.

DROPS Design 19.11.2019 kl. 09:17:

Dear Carrie, you should have 74 sts for back piece (not 75 sts, pattern will be edited) + 53 sts for each sleeve + 74 sts for front piece = 254 sts. Then you replace the 53 sts each sleeve with 8 new stitches = 74+8+74+8= 164 sts. See in this video (for a raglan, but technique for sleeve will be the same here) from time code 07:00 approx. Happy knitting!

Melanie 12.11.2019 - 19:23:

The cast on stitches of 62 ,ages 3/4 , does not give a wide enough opening for the neck . What should be the correct cast on number

Alice 09.11.2019 - 09:31:

Bonjour, je fais la taille 5/6 ans. Le nombre de mailles de départ (66) réalise une encolure qui me paraît extrêmement petite. Ma fille ne peu pas passer la tête, alors que l'encolure semble bien large sur la photo. Je ne comprends pas. Est ce bien le nombre de maille necessaire ou faut-il en rajouter ?

DROPS Design 12.11.2019 kl. 12:23:

Bonjour Alice, pensez à bien vérifier votre tension, et si besoin, vous pouvez ajuster le nombre de mailles à la circonférence souhaitée. Bon tricot!

Elisabeth Mühlböck 24.09.2019 - 18:59:

Hallo, Agnes sweater, leider kenne ich mich nicht aus beim Zunahmetipp, 1 Umschlag = 2 Maschen zugenommen? bin Anfänger und kämpfe mit die Alnleitungsschritte. Liebe Grüße Elisabeth

DROPS Design 25.09.2019 kl. 07:53:

Liebe Frau Mühlböck, in A.1 gibt es 2 unterschiedlichen Umschläge: 4. Symbol = 1 Umschlag für das Lochmuster, den stricken Sie rechts bei der nächsten Runde und 5. Symbol = 1 Umschlag als Zunahme, den stricken Sie rechts verschränkt bei der nächsten Runde. hier lesen Sie mehr über Diagramme. Viel Spaß beim stricken!

Post a comment to pattern DROPS Children 34-10

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.