DROPS / 176 / 29

With Me by DROPS Design

Knitted poncho with lace pattern in 2 strands DROPS Brushed Alpaca Silk, worked sideways. Size: S - XXXL.

Tags: lace, ponchos,

DROPS design: Pattern no as-070
Yarn group C + C or E
----------------------------------------------------------
Size: S/M - L/XL - XXL/ XXXL
Materials:
DROPS BRUSHED ALPACA SILK from Garnstudio (belongs to yarn group C)
100-125-125 g color 01, off white
100-125-125 g color 12, powder pink

DROPS CIRCULAR NEEDLE (60 cm / 24'') SIZE 6 mm/US 10 – or size needed to get 13 stitches and 17 rows in stockinette stitch with 2 strands = width 10 cm / 4'' and 10 cm / 4'' vertically.

DROPS MOTHER-OF-PEARL-BUTTON, round (light pink), NO 607: 4 pieces for all sizes

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (38)

77% Alpaca, 23% Silk
from 3.95 $ /25g
DROPS Brushed Alpaca Silk uni colour DROPS Brushed Alpaca Silk uni colour 3.95 $ /25g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 31.60$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER STITCH (back and forth):
1 ridge = knit 2 rows.

PATTERN:
See diagrams A.1 and A.2. Diagrams show all rows in pattern seen from the right side.

----------------------------------------------------------

PONCHO:
Worked back and forth on circular needle in 2 parts and sewn together when finished.

PART 1:
Cast on 64-78-78 stitches with 1 strand of each color with Brushed Alpaca Silk on circular needle size 6 mm / US 10. Work 3 ridges in GARTER STITCH - see explanation above. Then work according to diagram A.1 and A.2 as follows from right side: 5 edge stitches in garter stitch. * A.1 over 12 stitches, A.2 over 2 stitches *, repeat from *-* 3-4-4 times in total in width, work A.1 over 12 stitches and finish with 5 edge stitches in garter stitch. Continue to work according to diagrams A.1 and A.2. Repeat diagrams like this vertically until piece measures approx. 68-72-79 cm / 26 3/4"-28½"-31" or desired length. Work 3 ridges and loosely bind off. Cut the strands and fasten.

PART 2:
Cast on and work another part the same way.

ASSEMBLY:
Place parts together wrong side against wrong side. Sew parts together along one short side, sew in outer loop of stitch to avoid a chunky seam. Fasten buttons in one long side and make an opening for the head as follows: Place edge stitches from one part’s long side under edge stitches from the other part’s long side. Measure approx. 28-30-32 cm / 11"-11 3/4"-12½" from seam in short side and fasten first button here, fasten it through both layers. Fasten the other buttons evenly spaced down along the side, leave approx. 5 cm / 2'' at the bottom after last button.

Diagram

All measurements in charts are in cm.

= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= knit 2 together
= slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked
= between 2 stitches make 1 yarn over


Comments (38)

Leave your comment!

Nicole 18.02.2019 - 12:58:

Hallo, ich verstehe nicht warum 2 Teile gestrickt werden müssen. Hat schon jemand versucht es in einem Teil zu stricken? Oder funktioniert sas nicht? LG Nicole

DROPS Design 18.02.2019 kl. 13:11:

Liebe Nicole, jedes Teil wird separat gestrickt, dann werden die abgekettete Maschen beide Teile an der Seite zusammengenäht, deshalb muss man hier 2 Teile separat stricken. Viel Spaß beim stricken!

Laura 30.12.2018 - 10:22:

Buongiorno, prima di procedere con l’ordine dei filati chiedo un consiglio. Vorrei sostituire un filo di brucher Silk con baby alpaca silk lavorando sempre a 2 fili. Avrei comunque un bel risultato? Grazie mille

DROPS Design 30.12.2018 kl. 11:21:

Buongiorno Laura, per sostituire 1 filo di Brushed Alpaca Silk deve usare 2 fili di BabyAlpaca Silk, dal momento che i due filati appartengono a gruppi diversi. Il filato Brushed Alpaca Silk è più peloso e arioso, quindi anche la consistenza finale del capo sarà diversa. Buon lavoro!

Laura Campanari 06.10.2018 - 00:05:

Gentile redazione il filato da voi consigliato a singolo capo va lavorato con i ferri del 5, ma unendo i due non viene un lavoro un pó \\\"pesante\\\"? Dalla foto mi pare di vedere un poncho molto leggero, in caso potrei sostituire il filato con due capi di una matassa che singola lavoro con il 3? Grazie mille e complimenti per i bellissimi modelli.

Laura Campanari 06.10.2018 - 00:01:

Gentile redazione il filato da voi consigliato a singolo capo va lavorato con i ferri del 5, ma unendo i due non viene un lavoro un pó \"pesante\"? Dalla foto mi pare di vedere un poncho molto leggero, in caso potrei sostituire il filato con due capi di una matassa che singola lavoro con il 3? Grazie mille e complimenti per i bellissimi modelli.

DROPS Design 06.10.2018 kl. 08:15:

Buongiorno Laura. Il filato consigliato è molto leggero e vaporoso e anche usato doppio consente di creare un capo di consistenza morbida. Un filato più sottile con caratteristiche diverse potrebbe non garantire lo stesso risultato. Buon lavoro!

Jeanne 24.09.2018 - 07:19:

Voor maat L /Xl en XXL /XXXL staat zelfde steken aantal. ? patroon word 3,4,4 keer herhaald ? model poncho heeft 5 rijen patroon

DROPS Design 26.09.2018 kl. 14:10:

Dag Jeanne, Ja, dat klopt hoor. Het aantal herhalingen van het patroon in de breedte, wordt uiteindelijk de hoogte van de poncho als hij gedragen wordt en dan is het verschil in maten minder groot. Je breit in de lengte wel langer door, waar het verschil in de maten ontstaat.

Kerstin 11.08.2018 - 17:09:

Hallo, ich habe eine Frage zu den 3 Krausrippen: nachdem ich die Maschen aufgenommen und nun 6 Reihen kraus rechts gestrickt habe, wäre meine nächste Reihe eine Rückreihe.. muss die Reihe der Maschenaufnahme als 1. Reihe der Krausrippen gerechnet werden?

DROPS Design 13.08.2018 kl. 10:42:

Liebe Kerstin, die 1. Reihe der Krausrippen wird eine Hinreihe sein, der 6. Reihe wird eine Rückreihe, dann fangen Sie mit A.1 und A.2 bei der 1. Reihe = Hinreihe an. Viel Spaß beim stricken!

SIMONDON 11.06.2018 - 22:27:

Bonjour, Concernant la première partie du poncho, après avoir tricoter les 3 côtes mousse et sur l'endroit le 1er rang des diagrammes A1 et A2, sur l'envers (2ème rang des diagrammes) doit-on également tricoter 5 m mousse en début et fin de rang ? Si c'est le cas, alors on tricote sur ce rang envers : 5 m mousse, 2 m endroit, 12 m envers (4 fois) mais ensuite sur les 17 m restantes ? Merci par avance pour votre réponse.

DROPS Design 12.06.2018 kl. 09:01:

Bonjour Mme Simondon, vous tricotez sur l'endroit: 3 m point mousse, (A.1, A.2) x 4, A.1 et 5 m point mousse. Sur l'envers, vous tricotez: 5 m point mousse, A.1, (A.2, A.1) x 4, 5 m point mousse. Lisez les diagrammes en commençant en bas à droite et de droite à gauche sur l'endroit et de gauche à droite sur l'envers. Bon tricot!

Annette 13.05.2018 - 10:01:

Warum muss der Poncho in 2 Teilen gestrickt werden. Kann man nicht einfach ein Teil stricken und spart sich das Zusammennähen der Teile ?

DROPS Design 14.05.2018 kl. 10:31:

Liebe Annette, beide Stücke werden genausogleich und zusammengestrickt, so wird das Poncho im Foto gestrickt. Viel Spaß beim stricken!

Carmela 14.04.2018 - 17:32:

Ganz ehrlich? Das Model trägt grösse S oder M? Bei diesem Model bestimmt nicht. Ich habe bei grösse S oder M nur 4 Muster Reihen. Auf den Bild sind es 5. Somit wir er kurzer ausfallen als gedacht. Wolle nachbestellen wird schwierig mit der gleichen Nummer. Sehr Schade und ganz ehrlich au ärgerlich!

Ana 20.03.2018 - 14:21:

Still, my misunderstanding is: when assembling, do I have to sew a portion of the two parts together or all from top to bottom? Thank you very much for your help!

DROPS Design 20.03.2018 kl. 15:38:

Dear Ana, you will have to sew one of the short sides and along along one of the top sides (for shoulders) each side from neck - see ASSEMBLY. Happy knitting!

Post a comment to pattern DROPS 176-29

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.