DROPS / 140 / 40

Bliss by DROPS Design

Knitted DROPS neck warmer and hat with pattern in ”Nepal”.

DROPS design: Pattern no ne-104
Yarn group C
-----------------------------------------------------------
HAT:
Size: S/M - M/L
Head circumference: 52/54 cm - 56/58 cm / 20½"/21 1/4" - 22"/22 3/4"

Materials: DROPS NEPAL from Garnstudio
100 g for both sizes in color no 0517, medium gray

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 cm / 16'') size 5 mm / US 8 - or size needed to get 17 sts x 22 rows in stockinette st = 10 x 10 cm / 4'' x 4''.
DROPS CIRCULAR NEEDLE (40 cm /16'') size 4 mm / US 6 - for rib.
DROPS SILVER ANTIQUE BUTTON NO 533: 2 pieces
----------------------------------------------------------

NECK WARMER:
Size: one-size
Circumference: approx. 60 cm / 23½''.
Height: approx. 34 cm / 13½''

Materials: DROPS NEPAL from Garnstudio
250 g color no 0517, medium gray

DROPS CIRCULAR NEEDLE (80 cm / 32'') size 5 mm / US 8 - or size needed to get 17 sts x 22 rows in stockinette st = 10 x 10 cm / 4'' x 4''.
DROPS CIRCULAR NEEDLE (40 cm / 16'') size 4 mm / US 6 - for rib.
DROPS SILVER ANTIQUE BUTTON NO 533: 4 pieces

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (92)

65% Wool, 35% Alpaca
from 3.90 $ /50g
DROPS Nepal uni colour DROPS Nepal uni colour 3.90 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Nepal mix DROPS Nepal mix 4.10 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 27.30$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth on needle):
K sts on all rows.

GARTER ST (in the round on circular needle):
* K 1 round and P 1 round *, repeat from *-*.

PATTERN:
See diagram A.1. Diagram shows all rows in pattern from RS.
----------------------------------------------------------

HAT:
Piece is first worked back and forth on circular needle and then in the round.
Cast on 86-94 sts with Nepal on circular needle size 4 mm / US 6. K 1 row from WS, then work as follows: 6 sts in GARTER ST - see explanation above, * K 2, P 2 *, repeat from *-*, finish with K 2 and 6 sts in garter st.
Continue rib and in garter st in each side until piece measures 4 cm / 1½''. Switch to circular needle size 5 mm / US 8. Now work as follows: 6 sts in garter st, A.1 over the next 74-82 sts and finish with 6 sts in garter st. When piece measures 8 cm / 3 1/8'', bind off the first 6 sts on needle, then work in the round with A.1 over all sts = 80-88 sts.
When piece measures 20-21 cm / 8"-8 1/4'', work in GARTER ST - see explanation above - until finished measurements.
Work in garter st, AT THE SAME TIME dec 12 sts evenly every 3rd round a total of 5 times = 20-28 sts remain on round.
Now K2 tog around, cut the thread and pull it through the remaining sts. Tighten tog and fasten.
The hat measures approx. 25-26 cm / 9 3/4"-10 1/4" vertically. Sew 2 buttons on to flap at the bottom of hat, sew through both layers.
----------------------------------------------------------

NECK WARMER:
Worked back and forth on needle. Cast on 62 sts on circular needle size 4 mm / US 6 with Nepal.
K 1 row from WS, then work as follows - from RS: 6 sts in garter st, K 2, * P 2, K 2 *, repeat from *-* and finish with 6 sts in garter st. Continue like this.
When piece measures 4 cm / 1½'', switch to circular needle size 5 mm / US 8 and continue as follows: 6 sts in garter st, diagram A.1 over the next 50 sts and finish with 6 sts in garter st.
When piece measures 20 cm / 8'', bind off 6 sts in each side = 50 sts. Cut the thread. Put piece aside.
Knit another piece the same way.

Cast on 6 sts on circular needle size 5 mm / US 8, work sts from one piece back on needle, work sts from the other piece back on needle and cast on 6 sts at end of row = 112 sts.
Worked back and forth on needle as follows: 6 sts in garter st (band), diagram A.1 over the next 100 sts, 6 sts in garter st (band).
Continue like this until piece measures 34 cm / 13½''.
Switch to circular needle size 4 mm / US 6, then work as follows – AT THE SAME TIME on first row inc 2 sts evenly: 6 sts in garter st, K 2, * P 2, K 2 *, repeat from *-* and finish with 6 sts in garter st = 114 sts.
Work rib for 4 cm /1½", then bind off with K over K and P over P. Place bands on top of each other and sew on 4 buttons through both layers.

This pattern has been corrected. .

Updated online: 18.09.2012
under NECK WARMER: ..... and finish with 6 sts in garter st = 114 sts. Work rib for 4 cm /1½", then bind off with K over K and P over P. Place bands ...

Diagram

All measurements in charts are in cm.

= K from RS, P from WS
= P from RS, K from WS

Monica 20.12.2018 - 16:01:

Buonasera, lavorando a m legaccio in tondo è corretto fare le diminuzioni a volte sul dritto e a volte sul rovescio?(per una taglia s/m del cappello). Grazie, saluti.

DROPS Design 20.12.2018 kl. 16:50:

Buongiorno Monica. Quando lavora in tondo, lavora sempre sul diritto del lavoro. In caso di lavorazione in piano, diminuire ogni 3 ferri comporterebbe diminuire una volta sul diritto del lavoro, una volta sul rovescio. Buon lavoro!

Annick 17.11.2018 - 21:28:

Bonjour, j‘ai tricoté le bonnet qui est magnifique, et les explications très claires. Pour le tour de cou, j‘ai tricoté les 2 parties identiques, mais je ne comprends pas vraiment la suite. comment rassembler les 2 parties. Est-ce que vous pourriez y ajouter un shéma ou une illustration? pour aider un peu. Merci d‘avance

DROPS Design 19.11.2018 kl. 08:23:

Bonjour Annick, à la fin de la 2ème partie, coupez le fil, comme à la fin de la 1ère partie. Montez maintenant 6 mailles avec l'aiguille 5, tricotez les mailles des deux parties l'une après l'autre, et montez 6 m = 112 m sur l'aiguille. Continuez maintenant en allers et retours avec 6 m au point mousse (= les 6 nouvelles mailles) de chaque côté. Bon tricot!

Hermoso 17.10.2018 - 20:06:

Bonsoir je comprends pas le diagramme les rgs à l'envers on tricote comme les mailles se présente?merci

DROPS Design 18.10.2018 kl. 09:25:

Bonjour Mme Hermoso, lisez le diagramme en commençant en bas à droite et de droite à gauche sur l'endroit (= et tous les tours quand vous tricotez en rond) et de gauche à droite sur l'envers ( quand vous tricotez en rangs). Ainsi, A.1 se tricote ainsi en allers et retours: rang1 (sur l'endroit): 1 m end, 1 m env, 1 m end, 1 m env, au rang2 (sur l'envers): 1 m end, 1 m env, 1 m end, 1 m env. Rang 3: tout à l'end. Rang 4: tout à l'end. En rond: rangs 1 et 2: 1 m end, 1 m env, 1 m end, 1 m env. Rang3: tout à l'end. Rang4: tout à l'env. Bon tricot!

Hesnard Chantal 05.04.2018 - 16:48:

Bonjour, pourriez-vous svp m'envoyer la croquis du modèle car je n'arrive pas à voir comment on le monte. Merci d'avance

DROPS Design 06.04.2018 kl. 08:28:

Bonjour Mme Hesnard, il n'y a pas de croquis pour ce modèle, à quel niveau bloquez-vous? Tricotez-vous le bonnet ou le tour de cou?

Sandra 27.12.2017 - 22:41:

Hallo zusammen, Es fehlt die Angabe zu "kraus rechts - siehe oben" in dieser Anleitung... Es gibt keine Erklärung über der Anleitung wie sonst immer...

Marianna 26.01.2017 - 23:25:

Ma quando posso unire in tondo???? Dopo che ho calato le prime 6maglie??

DROPS Design 27.01.2017 kl. 06:55:

Buongiorno Marianna. Sì esatto, lavora in tondo dopo aver intrecciato le 6 maglie, quindi quando ha completato la parte a legaccio dove poi verranno attaccati i bottoni. Buon lavoro!

Belinda Lance 12.01.2017 - 16:25:

The Drops Yarn weight symbol used here is (Nepal Yarn Group C). In Canada we use number weight symbol: Lace is 0, Super Fine is 1, Fine is 2, Light is 3, Medium is 4, Bulky is 5, Super Bulky is 6 and Jumbo 7. So what number would be used for this particular garment? Is it 4 Medium?

DROPS Design 12.01.2017 kl. 17:09:

Dear Mrs Lance, you'll find all relevant informations about the yarn under their own shadecard. Remember your DROPS Store will provide you any further assistance. Happy knitting!

Belinda Lance 10.01.2017 - 22:03:

I did a long tail cast on of 94 I wrote it out so I could understand and because I am not working in rounds for the first part so I refer to back and forth in rows. Row 1: Knit Row 2: Knit 6, K2, P2 (20 times =80), K2, knit 6 Row 3: knit 6, P2, K2 (20 times) P2, knit 6 Is this how I would start out on the hat for the first couple of rows? I would greatly appreciate any assistance. Thanks:)

DROPS Design 11.01.2017 kl. 09:22:

Dear Mrs Lance, you should have rib K2/P2 with 6 sts in garter st on each side of row. When working rib from WS K over K and P over P (continue the 6 sts in garter st on each side). Happy knitting!

Annette Guay 04.01.2017 - 16:36:

Merci bcp ,,pour les explications.😊

Annette 02.01.2017 - 16:59:

Je ne comprends pas comment faire les diminutions pour le bonnet repartir..5 fois 12 diminutions tous les 3 tours,j,ai 80 mailles merci..

DROPS Design 02.01.2017 kl. 17:03:

Bonjour Annette, tricotez 1 tour en répartissant 12 diminutions (= il reste 68 m, tricotez 2 tours sans diminuer, répétez ces 3 tours encore 4 fois, il reste 20 m. Cliquez ici pour calculer comment répartir les diminutions. Bon tricot!

Post a comment to pattern DROPS 140-40

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.