Woodland Fairy by DROPS Design

Knitted dress for children in DROPS Sky or DROPS Merino Extra Fine. The piece is worked top down with lace pattern. Sizes 3-12 years.

  • Woodland Fairy / DROPS Children 34-25 - Knitted dress for children in DROPS Sky or DROPS Merino Extra Fine. The piece is worked top down with lace pattern. Sizes 3-12 years.
  • Woodland Fairy / DROPS Children 34-25 - Knitted dress for children in DROPS Sky or DROPS Merino Extra Fine. The piece is worked top down with lace pattern. Sizes 3-12 years.
  • Woodland Fairy / DROPS Children 34-25 - Knitted dress for children in DROPS Sky or DROPS Merino Extra Fine. The piece is worked top down with lace pattern. Sizes 3-12 years.
DROPS Design: Pattern no sk-008-bn
Yarn group B
-------------------------------------------------------

SIZES:
3/4 - 5/6 - 7/8 - 9/10 - 11/12 years
Size in cm: 98/104 - 110/116 - 122/128 - 134/140 - 146/152
Size in feet: 3ft3/3ft5 – 3ft7/3ft9 – 4ft/4ft2 – 4ft5/4ft7 – 4ft9/4ft12
Finished measurements:
Full length: 54-59-61-69-74 cm = 21 1/4”-23 1/4”-24”-27 1/8”-29 1/8”

All measurements in charts are in cm.

MATERIALS:
DROPS SKY from Garnstudio (belongs to yarn group B)
250-250-300-300-350 g color 19, brick
Or use:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
400-450-500-550-600 g color 33, rose

KNITTING GAUGE:
21 stitches in width and 28 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: Length 40 cm = 16” and 60 cm = 24” or 80 cm = 32”.
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM = US 4 for rib.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM = US 4: Length 40 cm = 16” and 80 cm = 32” for rib.
Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------
Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here
-------------------------------------------------------


74% Alpaca, 18% Polyamide, 8% Wool
from 8.40 $ /50g
DROPS Sky uni colour DROPS Sky uni colour 8.40 $ /50g
Purple Sheep Yarns
Order
DROPS Sky mix DROPS Sky mix 8.40 $ /50g
Purple Sheep Yarns
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 42.00$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

INCREASE TIP:
Increase with 1 yarn over; on the next round work the yarn over twisted to avoid a hole.

PATTERN:
See diagram A.1; choose your size in the diagram.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

DRESS:
The yoke is worked in the round, top down. After the piece has been divided for body and sleeves, the body is continued in the round with circular needle, and the sleeves are workedin the round with double pointed needles.

YOKE:
Cast on 72-78-84-90-96 stitches with short circular needle size 3.5 mm = US 4 and Sky. Insert 1 marker at the beginning of the round (= mid back). Work rib with knit 1/ purl 2 for 3-3-4-4-4 cm = 1 1/8”-1 1/8”-1 1/2”-1 1/2”-1 1/2” (= neck). The piece is now measured from here. Change to short circular needle size 4 mm = US 6 and knit 2 rounds, adjusting on the first round the number of stitches to 66-72-78-84-91 stitches. Then work A.1 (= 11-12-13-12-13 repeats in width) – see diagram for the correct size! REMEMBER THE KNITTING GAUGE! Change to a longer circular needle when you have increased enough stitches. When A.1 has been completed there are 198-216-234-240-260 stitches on the needle. On the next round increase 14-12-10-24-20 stitches evenly spaced while at the same time working stockinette stitch = 212-228-244-264-280 stitches. Continue with stockinette stitch until the piece measures 12-13-14-15-16 cm = 4 3/4”-5 1/8”-5 1/2”-6”-6 1/4” (without the rib). The next round is worked as follows: Knit 31-33-35-37-39 stitches (= half the back piece), place the next 44-48-52-58-62 stitches on 1 thread for sleeve (without working them), cast on 6 new stitches, knit 62-66-70-74-78 stitches (= front piece), place the next 44-48-52-58-62 stitches on 1 thread for sleeve (without working them), cast on 6 new stitches and knit 31-33-35-37-39 stitches (= half the back piece).

BODY:
= 136-144-152-160-168 stitches. THE PIECE IS NOW MEASURED FROM HERE! Now insert 6 markers in the piece as follows: Marker 1 is inserted in the first stitch at the beginning of the round (= side), marker 2 is inserted in the 23rd-25th-26th-27th-28th stitch, marker 3 is inserted in the 47th-49th-52nd-55th-58th stitch, marker 4 is inserted in the 69th-73rd-77th-81st-86th stitch (= side), marker 5 is inserted in the 91st-97th-102nd-107th-114th stitch, marker 6 is inserted in the 115th-121st-128th-135th-144th stitch (there are 21-23-24-25-24 stitches left on the round after the last marker). READ INCREASE TIP! On the next round increase 1 stitch on each side of each marker (12 stitches increased on round) and repeat these increases every 1½-2-2-2-1½ cm = 1/2”-3/4”-3/4”-3/4”-1/2” a total of 4 times. Then increase as follows: Increase 1 stitch on each side of markers 1 and 4 (= sides), 1 stitch after markers 2 and 5 and 1 stitch before markers 3 and 6 – READ INCREASE TIP (= 8 stitches increased per round). Increase in the different sizes as follows:
3/4 years: Increase approx every 3 cm = 1 1/8” a total of 11 times.
5/6 years: Increase approx. every 3 cm = 1 1/8” a total of 11 times.
7/8 years: Increase approx. every 3 cm = 1 1/8” a total of 12 times.
9/10 years: Increase approx. every 3½ cm = 1 1/4” a total of 12 times.
11/12 years: Increase approx. every 4 cm = 1 1/2” a total of 12 times.
There are now 272-280-296-304-312 stitches on the round. Work until the piece measures 38-42-43-49-53 cm = 15”-16 1/2”-17”-19 1/4”-21”. On the next round increase 34-35-37-38-39 stitches evenly spaced – READ INCREASE TIP (increase after approx. each 8th stitch) = 306-315-333-342-351 stitches. Change to circular needle size 3.5 mm = US 4 and work rib with knit 1/ purl 2 for 2 cm = 3/4”. Loosely bind off with knit on the next round.

SLEEVE:
Place the stitches from the one thread on double pointed needles size 4 mm = US 6 and knit up 1 stitch in each of the 6 stitches cast on in the side of the body (insert 1 marker in the middle of these stitches) = 50-54-58-64-68 stitches. THE PIECE IS NOW MEASURED FROM HERE! Work stockinette stitch in the round. When the piece measures 24-29-33-36-40 cm = 9 1/2”-11 3/8”-13”-14 1/4”-15 3/4” from the marker adjust the number of stitches to 42-42-48-48-48 stitches. Change to double pointed needles size 3.5 mm = US 4 and work rib with knit 1/ purl 2 for 4 cm = 1 1/2”. Loosely bind off with knit on the next round. Work the other sleeve in the same way.

Diagram

All measurements in charts are in cm.

symbols = knit
symbols = purl
symbols = between 2 stitches make 1 yarn over. The yarn over is knitted twisted on the next round to avoid a hole
symbols = between 2 stitches make 1 yarn over. The yarn over is knitted on the next round to leave a hole
symbols = slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over
symbols = knit 2 together
symbols = slip 1 stitch as if to knit, knit 2 together and pass the slipped stitch over the knitted together stitches
diagram
diagram
diagram
signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Children 34-25) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (37)

country flag Caroline Nilsson 01.06.2021 - 12:56:

Hej! Jag har förstått genom att läsa frågorna här att man ska flytta startmarkören när man ska börja med ökningar. Jag undrar nu, ska jag bara sticka ett kvarts varv och sen flytta markören? Eller ska jag ta av tråden och sen börja igen på rätt ställe? Mvh Caroline

user icon DROPS Design 02.06.2021 kl. 13:54:

Hej Caroline, ja det går bra att sticka ett kvarts varv, innan du sätter de nya markörer :)

country flag Halina 13.03.2021 - 20:23:

Förstår inte ert svar på Yvonnes fråga 20 sept 2019. Jag har samma problem och nu inser jag att jag inte vet vad jag ska göra för att jag har kommit till den punkten där man ska öka på olika sätt. Vad gör man nu

user icon DROPS Design 22.03.2021 kl. 12:00:

Hei Halina. Svaret til Yvonne er at når bærestykket (OK) er ferdig strikket skal 1.merket (som tidligere var midt bak) flyttes til siden av kjolen. Dvs den 1. masken på omgangen nå blir i den 4. nye masken du la opp under første erme. Du la opp 6 nye masker og midt under ermet og midt i siden på kjolen blir da mellom 3. og 4. nye maske. mvh DROPS design

country flag Soondoll 09.03.2021 - 07:21:

Thank you for your free pretty pattern. I have some question. At the yoke, you say " change the needle 4mm and adjust 66 stitches (for example cast on 72 stitches). How can I do that?

user icon DROPS Design 09.03.2021 kl. 07:54:

Dear Soondoll, this means you now work with the needle size 4 mm and on the first round decrease 6 sts evenly (to go from 72 sts down to 66 sts) - < a href="https://www.garnstudio.com/lesson.php?id=28&cid=19">this lesson explains how to decrease stitches evenly. Happy knitting!

country flag Janina Thersthol 12.02.2021 - 23:27:

Kan det verkligen stämma att jag efter ha gjort a1 I strl 122/128 ska ha 234 maskor på stickorna? Diagrammet visar ju en rapport om 20 maskor.. Det blir 230 totalt.. Då blir ju ökningen med 10 i min del helt fel eftersom det då blir 240 och jag ska ha 244 maskor..

user icon DROPS Design 19.02.2021 kl. 14:40:

Hej Janina, jo du starter med 78 masker, strikker A.1 (6masker) 13 gange. Tager ud ifølge diagrammet (12 udtagninger) x 13 =156 udtagninger + 78 = 234 masker. (1 rapport er nu 18 masker). Tager 10 masker ud = 244 masker. God fornøjelse!

country flag Irène 11.02.2021 - 18:43:

Bonjour, je voulais commander la laine Drops Sky pour tricoter ce modèle, mais j'ai un doute sur la couleur : est-ce bien le coloris 19 - unicolour ou le 09 - rouge brique - mix qui a été utilisé pour la robe de cette fillette ? Merci d'avance.

user icon DROPS Design 12.02.2021 kl. 06:53:

Bonjour Irène, il s'agit bien la couleur 19 (brique), le nom a été corrigé dans le modèle, merci. Bon tricot!

country flag Anne 02.01.2021 - 20:18:

Eine ganz tolle Anleitung. Das Kleid ist zauberhaft und hält mollig warm. Meine Tochter hatte sich sehr gefreut. Schon beim ersten Tragen ist jedoch durch ihre Winterjacke ein Loch entstanden. Beim zweiten Tragen hatte der Ärmel ein Loch, obwohl meine Tochter schon sehr vorsichtig mit ihrem Kleid war. Mit Sky stricke ich nicht mehr. Schade das Garn war eigentlich wirklich toll, weil es so leicht ist und trotzdem sehr warm.

country flag Gisele 07.12.2020 - 14:04:

Hello again, I am so sorry but it is not working for me. I placed the first marker and the fourth marker under the arms in the middle of the new added 6 stitches. But then how do I divide the rest. It is not adding up when I follow the pattern. Because the beginning of the round starts mid back. Can you please help me with this first row of counting and dividing step by step.

user icon DROPS Design 07.12.2020 kl. 15:59:

Dear Gisele, remember rounds are supposed to start now on mid under arm when working bottom of dress after division, 1st marker = at the beg of the round = mid under one of the arm, then start counting the number of sts for the size from here to add the other markers, the 4th marker should be below the 2nd sleeve. Hope this helps, happy knitting!

country flag Gisele 05.12.2020 - 04:05:

I am just adding more explanation to my initial question I sent earlier. According to the pattern, marker 1 should be inserted in the first stitch the beginning of the round (=side) which falls in the mid back not the side. And the same for marker 4, it falls in the mid front not the other side. Thank you for your help!

user icon DROPS Design 07.12.2020 kl. 07:31:

Dear Gisele, please tell us if the previous explanation could help you. Happy Knitting!

country flag Gisele 05.12.2020 - 03:26:

After finishing the yoke and when dividing the work on the 6 markers, there is something that is confusing. The first and fourth markers indicate that they are the increases for the sides but they are positioned in the front and back of the dress not on the sides according to the pattern. Can you help please

user icon DROPS Design 07.12.2020 kl. 07:25:

Dear Gisele, the first and 4th marker are on each side of the dress, ie in the middle of the 6 new stitches cast on when dividing piece for sleeves. Start to count from the beg. of the round, ie in the middle of first side/under arm to place the other markers. Happy knitting!

country flag Zuzka 15.11.2020 - 23:17:

SK: Dobry den, mam rovnaku otazku ako Zsuzsa 04.06.2020 - 21:03 z Madarska, ktora na svoj dotaz este nedostala odpoved - otvor na hlavu ma obvod 30 cm a nezmesti sa 2,5 rocnemu dietatu cez hlavu. Co s tym, ako to bolo vlastne myslene? Dakujem. EN: Hello, I have same question as Zszusza from Hungary, she has not been replied yet - yoke has 30cm in circuit and does not fit to 2,5 years old girl through head. How it was meant to be or is there any corrrection comming up? Thank you.

user icon DROPS Design 20.11.2020 kl. 08:44:

Dear Zuzka, the rib is stretchy, so it should be ok. The problem may be with the first round (casting on). Try to do it as elastic as possible. You can use bigger needles to do it, or use two needles, please see our video HERE. Don't give up and happy knitting!

Post a comment to pattern DROPS Children 34-25

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

From the #dropsfan gallery

Woodland Fairy

Monika, Poland

Woodland Fairy

Ela, Germany

Woodland Fairy

Gabriela, Romania