DROPS Paris
DROPS Paris
100% Cotton
from 1.10 $ /50g
Get the yarn to make this pattern from 4.40$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS Extra 0-1375
DROPS Design: Pattern no w-660
Yarn group C + C or E
-----------------------------------------------------------
BASKET WITH LID:
Measurements: Height: approx. 9 cm / 3½''. Circumference (opening at top of basket): approx. 25 cm / 9 3/4''. Circumference (at widest point of basket): approx. 37 cm / 14½''.
Materials:
DROPS PARIS from Garnstudio (belongs to yarn group C)
100 g color 01, apricot
50 g color 38, raspberry
50 g color 17, off white
A small remnant of gray – for snout and eyes

DROPS CROCHET HOOK SIZE 5.5 MM/US 9 – or the size needed to get 13 single crochets and 13 rows with 2 strands on 10 cm / 4'' in width 10 cm / 4'' in height.

DROPS CROCHET HOOK SIZE 3.5 MM/E/4 – or the size needed to get 18 double crochets and 10.5 rows in height with 1 strand.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Paris
DROPS Paris
100% Cotton
from 1.10 $ /50g
Get the yarn to make this pattern from 4.40$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
See diagrams A.1 and A.2.

DOUBLE STRAND TIP:
Use the strand from both the inside and outside of the ball. When changing to a new ball, it is a good idea not to change both strands at the same time – so that the fastening of the strands will not be so thick.

CROCHET INFO:
Each round starts with 1 chain stitch (the chain stitch does not replace the first single crochet). Finish the round with 1 slip stitch in the first single crochet.
Each row starts with 1 chain stitch (the chain stitch does not replace the first single crochet).

WORK 2 SINGLE CROCHETS TOGETHER:
* Push the hook into the next stitch, pick up the strand *, repeat from *-* one more time, make a yarn over and pull the yarn over through all 3 loops on the hook (= 1 single crochet decreased).

LOBSTER STITCHES:
Are worked as single crochets, but backwards. In other words, you work a single crochet from left to right. The round with lobster stitch starts with 1 chain stitch (the chain stitch does not replace the first single crochet) and finishes with 1 slip stitch in the first chain stitch.
----------------------------------------------------------

BASKET WITH LID:
The basket is worked in the round, bottom up. READ DOUBLE STRAND TIP! The lid is worked in the round, top down.

BOTTOM:
Work 3 chain stitches with hook SIZE 5.5 mm/US 9 and 2 strands apricot and form them to a ring with 1 slip stitch in the first chain stitch. Work A.1 a total of 6 times in the round – Remember CROCHET INFO! When A.1 has been completed in height, there are 48 single crochets on the last round.
Then work A.2 a total of 4 times in the round. When A.2 has been completed in height, there are 32 single crochets on the last round. Now work 1 round with LOBSTER STITCHES – see description above. Cut and fasten the strand.

TAIL:
Make a pompom of approx. 6 cm / 2 3/8'' in diameter with a remnant of off white. Sew it on to the bottom of the basket.

LID:
The lid is worked in the round, top down.
Work 3 chain stitches with hook SIZE 5.5 mm/US 9 and 2 strands apricot and form them to a ring with 1 slip stitch in the first chain stitch. Work A.1 a total of 6 times in the round. When round 7 in A.1 has been completed in height, there are 42 single crochets on the round, continue to work as follows:
ROUND 1: Work 1 single crochet in the back loop of each stitch.
ROUND 2: Work 1 round with lobster stitches.
Cut and fasten the strand.

EARS:
The ears are worked back and forth and are sewn on to the lid afterwards.
Work 4 chain stitches with hook SIZE 5.5 mm/US 9 and 2 strands raspberry.
ROW 1: Work 1 single crochet in the 2nd chain stitch from the hook, work 1 single crochet in each of the next 2 chain stitches = 3 single crochets.
ROW 2: Work 1 single crochet in each of the 3 single crochets.
ROW 3: Work 2 single crochets in the first single crochet, 1 single crochet in the next stitch, 2 single crochets in the next stitch = 5 single crochets.
ROWS 4.-10: Work 1 single crochet in each single crochet.
ROW 11: WORK 2 SINGLE CROCHETS TOGETHER – see description above, work 1 single crochet, work 2 single crochets together = 3 single crochets.
ROW 12: * Push the hook through the first stitch and pull the strand through *, repeat from *-* in each of the next 2 stitches (= 4 loops on the hook), make a yarn over and pull the strand through all the loops on the hook.
Cut the strands and fasten them.
Work an edge of single crochets around the ear as follows: Fasten the strand with 1 single crochet in the first chain stitch worked at the start of the ear. Work 1 single crochet in the outermost loop of the outermost stitch in each of the first 11 rows, work 1 chain stitch, work (1 single crochet, 1 chain stitch, 1 single crochet) in the 3 stitches worked together outermost on the ear, work 1 chain stitch and continue along the edge with 1 single crochet in each of the 11 rows. Cut the strand, but leave approx. 20 cm / 8'' for assembly.
Work another ear in the same way.
Sew the ears in the row which was worked in the back loop of the stitches on the lid. Sew with 1 strand in one and one stitch so that the seam is not thick. Cut and fasten the strand.

EYES AND SNOUT:
The eyes are worked in the round with 1 strand.
Work 3 chain stitches with hook size 3.5 mm/E/4 and a remnant of gray and form them to a ring with 1 slip stitch in the first chain stitch.
ROUND 1: Work 6 single crochets around the chain-stitch ring.
ROUND 2: Change to off white and work 2 chain stitches, work 1 double crochet in the first single crochet, work 2 double crochets in each of the next 2 single crochets, work 1 half double crochet in the next single crochet. Cut the strand but leave approx. 20 cm / 8'' for assembly.
Work another eye in the same way.
Sew the eyes to the basket by sewing a few stitches up and along the edge of the eyes.
Make a snout on the basket by sewing a few stitches with a remnant of gray and double thread. Cut and fasten the strand.

TWISTED CORD:
Cut 2 strands off white of 1 metre. Twist them together until they begin to resist, fold the cord double and it will twist again. Tie a knot in each end so that it stays twisted.
Thread both ends of the cord through the middle of the lid so that there is a loop on the lid. Tie the ends of the cord together on the inside of the lid.

Diagram

All measurements in charts are in cm.

symbols = Work 3 chain stitches and form them to a ring with one slip stitch in the first chain stitch. The black spot on the circle is the start of the round.
symbols = 1 single crochet around the chain-stitch ring
symbols = 1 single crochet in stitch
symbols = Work 2 single crochets together as follows: * Push the hook in the next stitch, pick up the strand *, repeat from *-* 1 more time, make a yarn over and pull the yarn over through all 3 loops on the hook (= 1 single crochet decreased).
symbols = The round has already been worked - start on the next round!
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Gummy Bunny

Sylwia, Norway

Gummy Bunny

Annie, Netherlands

Post a comment to pattern DROPS Extra 0-1375

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (1)

country flag Lammie wrote:

Het A1 patroon werd veel te puntig ik heb dit opgelost door de eerste toer een keer te herhalen.

28.04.2019 - 15:46