DROPS Baby / 25 / 3

Lullaby by DROPS Design

Knitted baby hat in garter st with picot edge in DROPS Karisma. Size 0 - 4 years.

DROPS design: Pattern no u-062-by
Yarn group B
-----------------------------------------------------------
Size: 0/1 - 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Head circumference: 34/38- 40/42- 42/44- 44/46 (48/50- 50/52) cm / 16''-17''-18'' (19''-20'')

Materials:
DROPS KARISMA from Garnstudio
50-50-100-100 (100-100) g color no 66, light dusty pink

DROPS STRAIGHT NEEDLES size 4 mm / US 6 - or size needed to get 21 sts x 42 rows in garter st = 4'' x 4'' (10 x 10 cm).

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Comments (12)

100% Wool
from 3.20 $ /50g
DROPS Karisma uni colour DROPS Karisma uni colour 3.20 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Karisma mix DROPS Karisma mix 3.20 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 3.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth on needle):
K all rows. 1 ridge = K2 rows.

PICOT EDGE (back and forth on needle):
ROW 1 (= RS): K all sts.
ROW 2 (= WS): K until 4 sts remain, work these sts as follows: K 2 tog, 1 YO, K 2 sts in each of the last 2 sts = 2 new sts on row.
ROW 3 (= RS): Slip 1st st as if to K, K 1, psso, K 1 and slip the last st on right needle over the foremost st, 2 sts dec - then K the remaining sts.
ROW 4 (= WS): K all sts.
Repeat rows 1 to 4.
----------------------------------------------------------

HAT:
Cast on 27-31-35-37 (41-43) sts on needles size 4 mm / US 6 with Karisma. Insert 1 marker inside the outermost 4 sts in right side of piece (seen from RS), move the marker upwards when working.
Work in GARTER ST - see explanation above, AT THE SAME TIME work PICOT EDGE over the outermost 4 sts before marker - see explanation above. AT THE SAME TIME inc 1 st in right side of piece (inside picot edge) and dec 1 st in left side of piece as follows:
ROW 1 (= RS): 4 sts picot edge, K 1, 1 YO (= 1 inc), work until 3 sts remain, K 2 tog and K 1.
ROW 2 (= WS): K until marker (K YO twisted to avoid holes) and finish with 4 sts picot edge.
Repeat these 2 rows until piece measures 5-5½-6-6½ (7-8) cm / 2"-2 1/4"-2 3/8"-2½" (2 3/4"-3 1/8").

Then dec 1 st in the right side of piece and inc 1 st in the left side of piece as follows:
ROW 1 (= RS): 4 sts picot edge, K 1, slip 1 st as if to K, K 1, psso, work until 1 st remains, make 1 YO and K 1.
ROW 2 (= WS): K until marker (K YO twisted) and finish with 4 sts picot edge.
Repeat these 2 rows until 1 row remains from WS before piece measures 10-11-12-13 (14-16) cm / 4"-4½"-4 3/4"-5" 5½"-6 1/4". Now work a row with eyelet holes from WS as follows: * K 2 tog, 1 YO *, repeat from *-* until 1 st remains before marker, K 1 and finish with 4 sts picot edge (K YOs on row with eyelet holes, not K twisted on next row).
Then inc 1 st in right side of piece every 4 rows and dec 1 st in left side of piece every other row until piece measures 14½-15½-16½-17½ (18-19) cm / 5 3/4"-6"-6½"-6 3/4" (7"-7½") from cast-on edge.
Then dec 1 st in right side of piece every 4 rows and inc 1 st in left side of piece every other row until piece measures 19-20-21-22 (22-22) cm / 7½"-8"-8 1/4"-8 3/4" (8 3/4"-8 3/4") from cast-on edge.
On next row from WS work eyelet holes as follows: * K 2 tog, 1 YO *, repeat from *-* until 1 st remains before marker, K 1 and finish with 4 sts picot edge (K YOs on row with eyelet holes, not K twisted on next row).
Then inc 1 st in right side of piece every other row and dec 1 st in left side of piece every other row until piece measures 24-25½-27-28½ (29-30) cm / 9½"-10"-10½"-11 1/4" (11½"-11 3/4"). Now dec 1 st in the right side on every other row and inc 1 st in the left side on every other row until finished measurements = 29-31-33-35 (36-38) cm / 11½"-12 1/4"-13"-13 3/4" (14 1/4"-15"). Bind off.

ASSEMBLY:
Back of hat = one side of piece has 2 whole tips and 2 half tips. The 2nd of the 3 whole tips in the opposite side of the piece (= blunt tip) goes down to the forehead at the front.
Sew the hat edge to edge with neat little stitches as follows: Sew tog on back of head by sewing first half tip tog with first half of first whole tip.
Continue to sew second half of first whole tip tog with first half of second whole tip. Then sew the other half of the second whole tip tog with the last half tip.
Finish by sewing the hat tog mid back.

TIES:
Cut 2 lengths of yarn of 150 cm / 59''. Twine them tog until they resist, thread the tie through one tip at the front of hat (from WS through a hole in row with eyelet holes) place the string double and let it twine again. Make a knot at the end.
Make another tie in the other end of hat.

Comments (12)

Leave your comment!

Sumaira 15.02.2017 - 17:38:

Hi is there any complete video for this hat pattern.

DROPS Design 16.02.2017 kl. 09:29:

Dear Sumeira, there is no video showing how to work the full hat, but you can find (under tab "Videos" on the right side of "Materials) some videos showing the techniques used in that pattern such as the picot edge and how to assembly the hat tog. Happy knitting!

Sumaira 14.02.2017 - 14:04:

After eyelet holesfrom WS pattern says"then increase 1st in every 4rows and dec 1. St in left side of piece every other row..I am not understanding this.every 4rows mean both right and wrong side...?

DROPS Design 14.02.2017 kl. 15:02:

Dear Sumaira, you inc 1 st every 4th row = every other row worked from RS, and dec 1 st every other row = every row from RS. Happy knitting!

Jinky 09.12.2015 - 01:51:

Thanks for this beautiful pattern, love making it, was wondering if you have an adult size for this one?

DROPS Design 09.12.2015 kl. 09:54:

Dear Jinky, what about this one - just add a picot edge as in the baby pattern. Happy knitting!

Ranveig 24.09.2015 - 19:09:

Thank you so much for your video on how to assemble the hat. I will use this pattern many times.

Ranveig 23.09.2015 - 15:41:

Do you have a picture of what the Lullaby hat should look like after completing the knitting and before sewing it together? I think I have the points uneven. Would like to see a diagram of what it should look like.

DROPS Design 24.09.2015 kl. 10:07:

Dear Mrs Ranveig, the video below shows how to assembly the hat, the one shown in the video is not worked sideways, but final result is the same with points an half points sewn tog. Happy knitting!

Selam 05.08.2015 - 09:57:

How do I adujust the tension and size?is there some instructions please???

DROPS Design 07.08.2015 kl. 08:14:

Hej Selam, for at få færre m på 10 cm prøver du med en tykkere pind. for at få flere m på 10 cm prøver du med en tyndere pind. God fornøjelse!

Selam 05.08.2015 - 09:12:

Hi, how can I knit this hat for a child 6-9 years of Age?please help

DROPS Design 05.08.2015 kl. 09:49:

Dear Selam, this hat is for a head circumference to 50/52 cm, you can then adjust with your tension and the size of the child. Happy knitting!

Anna 24.04.2015 - 16:09:

Bij dit patroon is de picotrand niet correct weergegeven. De Noorse versie is dan ook iets anders (en wel consistent met de rest van debeschrijving). In de nederlandse versie zou moeten staan: Naald 1 alles recht moeten zijn. naald 2 alles recht tot 4 steken over zijn, dan het picot gedeelte voor 2 steken meer. naald 3 minderingen van het picot gedeelte en vervolgens alles recht naald 4 alles recht. Misschien is dit ook bij vertalingen naar andere talen misgegaan.

DROPS Design 27.04.2015 kl. 14:43:

Hoi Anna. Ja, je hebt gelijk dat de Nederlandse beschrijving verkeerd was. Nld 3 en 4 moesten 2 en 3 zijn. Het is aangepast. Bedankt voor het melden.

Nadine 17.12.2014 - 13:00:

Er staat bij de stekenverhouding 10x10 is 21 St. En 42 nl maar karisma (en garenalternatief Marino extra fine ) geven op de omslag aan 21stk en 28 Ndl. Wat is de JUISTE stekenverhouding? Alvast dank

DROPS Design 17.12.2014 kl. 14:56:

Hoi Nadine. Wat er staat op de wikkel is de standaard. Je moet de stekenverhouding aanhouden wat op het patroon staat. De stekenverhouding kan verschillen per patroon afhankelijk van structuur, motief, vorm enzovoort.

Dijana 20.11.2014 - 18:37:

Picokant på de 4 yderst masker samtidig med der tages 1 m ud (indenfor picokanten) Når der så står 4 m picokant, 1 r, slå om, ret til der er 3 m tilbage.. Skal jeg så strikke 4 r (picokanten) og 1 r, slå om. Eller er det at starte med 1 r, slå om også ret vider.

DROPS Design 21.11.2014 kl. 16:08:

Hei Dijana. Du strikker picotkant over 4 m i höjre side af arbejdet (set fra retten). Dvs, du strikker PICOTKANT over de 4 m i höyre side, merke, 1 r, 1 kast og strik til 3 m tilbage: 2 r sm og 1 r. Vend og strik vrang som beskrevet.

Post a comment to pattern DROPS Baby 25-3

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.