DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 3.00 $ /50g
Get the yarn to make this pattern from 6.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

Sweet Treats

Knitted socks/ankle socks in 2 strands DROPS Fabel. The piece is worked top down in stockinette stitch. Sizes 35 - 43 = US 4 1/2 - 12 1/2.

DROPS 238-29
DROPS Design: Pattern fa-527
Yarn group A + A or C
-------------------------------------------------------

SIZES:
Size in EU: 35/37 - 38/40 - 41/43
Size in US: US 4 1/2/6 1/2 – 7 1/2/9 1/2 - 10 1/2/12 1/2
Foot-length: 22-24-26 cm = 8¾"-9½"-10¼"
Leg: Approx. 4 cm = 1½"

YARN:
DROPS FABEL from Garnstudio (belongs to yarn group A)
50-50-50 g color 100, off white
50-50-50 g color 161, pink dream

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.

KNITTING GAUGE:
19 stitches in width and 25 rows in height with stockinette stitch and 2 strands = 10 x 10 cm = 4" x 4".
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4", change to a larger needle size. If you get too few stitches on 10 cm = 4", change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 3.00 $ /50g
Get the yarn to make this pattern from 6.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------

HEEL DECREASES:
ROW 1 (= right side): Knit until there are 5-6-6 stitches left, slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch, turn the piece.
ROW 2 (= wrong side): Purl until there are 5-6-6 stitches left, slip 1 stitch as if to purl, purl 1 and pass the slipped stitch over the purled stitch, turn the piece.
ROW 3 (= right side): Knit until there are 4-5-5 stitches left, slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch, turn the piece.
ROW 4 (= wrong side): Purl until there are 4-5-5 stitches left, slip 1 stitch as if to purl, purl 1 and pass the slipped stitch over the purled stitch, turn the piece.
Continue to decrease like this, working until there is 1 stitch less each time before slipping a stitch and until there are 12-12-14 stitches left on the needle.

DECREASE TIP (for toe):
Start 3 stitches before the marker, knit 2 together, knit 2 (marker sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (2 stitches decreased). Repeat at the second marker.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SOCKS – SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round with double pointed needles, top down. The whole piece is worked with 2 strands.

LEG:
Cast on 44-46-50 stitches with double pointed needles size 4 MM = US 6 and 2 strands color pink dream DROPS Fabel.
Work 1 round of rib (knit 1, purl 1). Change to 2 strands color off white and continue until the rib measures 3 cm = 1⅛".
Change to 1 strand color off white and 1 strand color pink dream and work stockinette stitch until the leg measures 4 cm = 1½" – AT THE SAME TIME on the first round decrease 2 stitches evenly spaced = 42-44-48 stitches.
REMEMBER THE KNITTING GAUGE! Cut the strand.

HEEL AND FOOT:
Keep the first 10-11-12 stitches on the needle for the heel, place the next 22-22-24 stitches on a thread (top of foot) and keep the last 10-11-12 stitches on the needle for the heel = 20-22-24 heel-stitches.
Work stockinette stitch back and forth with 2 strands color off white for 6-6-6½ cm = 2⅜"-2⅜"-2½". Insert 1 marker in the middle of the last row – the foot is measured from this marker.
Work HEEL DECREASES – read description above.
After the heel decreases, work as follows with 1 strand color pink dream and 1 strand color off white: Work stockinette stitch over the 12-12-14 heel stitches, knit up 12-13-13 stitches along the side of the heel, work as before over the 22-22-24 stitches from the thread and knit up 12-13-13 stitches along the other side of the heel = 58-60-64 stitches. Work to the middle of the heel – the round now starts here.
Insert 1 marker on each side of the 22-22-24 stitches on top of the foot.
Work stockinette stitch and decrease on each side as follows: Knit together the last 2 stitches before the first marker and knit twisted together the first 2 stitches after the second marker. Decrease like this each round a total of 4-3-3 times, then every 2nd round 7-7-7 times = 36-40-44 stitches.
Continue working until the foot measures 16-17-18 cm = 6¼"-6¾"-7" from the marker on the heel, measured under the foot. Change to 2 strands color off white. Continue with stockinette stitch until the foot measures 16-17-18 cm = 6¼"-6¾"-7" from the marker, measured under the foot.
There is 4-5-6 cm = 1½"-2"-2⅜" left to finished length; try the sock on and work to desired length.

TOE:
Insert 1 marker in each side, with 18-20-22 stitches both on top of and under the foot. Work stockinette stitch. AT THE SAME TIME on the first round decrease for the toe at each marker – read DECREASE TIP (= 4 stitches decreased). Decrease like this every 2nd round a total of 4-5-7 times then every round 3-3-2 times = 8 stitches left. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The foot measures approx. 22-24-26 cm = 8¾"-9½"-10¼" from the marker and measured under the foot.
Work the other sock in the same way.

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.  

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 238-29

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (14)

country flag Beata wrote:

W polskim tłumaczeniu jest mały błąd - dwukrotnie podano tą samą długość - "Dalej przerabiać aż dł. stopy od markera na pięcie wynosi 16-17-18 cm, mierzyć pod spodem stopy. Dalej przerabiać 2 nitkami włóczki kolor ecru, dżersejem, aż dł. stopy od markera wynosi 16-17-18 cm, mierzyć pod spodem stopy. "

08.09.2024 - 19:41

DROPS Design answered:

Witaj Beato, zgadza się, bardzo dziękuję za info. Już poprawiam. Pozdrawiam!

08.09.2024 - 22:40

country flag Karine wrote:

Bonjour, Est-ce qu'il faut couper le fil à chaque changement de couleur ? Avez-vous une vidéo pour apprendre à faire des rayures ? Merci !

08.07.2024 - 09:51

DROPS Design answered:

Bonjour Karine, ce n'est pas necessaire. Vous pouvez suivre les fils sur l'envers, en croisant les fils comme dans notre video ICI. Bon tricot!

13.07.2024 - 14:11

country flag Rose wrote:

Bonjour, Je souhaitais savoir si la laine fabel Rêve Rose était en print ou long print pour reproduire exactement ce motif là svp ? Merci beaucoup par avance pour votre aide

27.02.2024 - 09:47

DROPS Design answered:

Bonjour Rose, le coloris rêve rose est une couleur print, cf nuancier; notez toutefois que la façon de produire les couleurs peut induire des différentes d'une pelote à l'autre, même au sein d'un même bain, vous aurez ainsi le même effet mais pas exactement les mêmes couleurs (plus d'infos sur le nuancier). Bon tricot!

27.02.2024 - 13:22

country flag DANIELA wrote:

Perché non sta scritto con quanti ferri dobbiamo iniziare a lavorare

01.09.2023 - 09:14

DROPS Design answered:

Buonasera Daniela, può lavorare come preferisce, ad esempio con le maglie su 4 ferri e lavorare con il 5°. Buon lavoro!

01.09.2023 - 19:17

country flag DANIELA wrote:

Quanti ferri devo iniziare?

01.09.2023 - 09:11

DROPS Design answered:

Buonasera Daniela, può lavorare come preferisce, ad esempio con le maglie su 4 ferri e lavorare con il 5°. Buon lavoro!

01.09.2023 - 19:17

country flag DANIELA wrote:

La lunghezza dei ferri qual è ? Devo prendere ferri corti o lunghi , sono alle prime armi.

30.08.2023 - 10:50

DROPS Design answered:

Buongiorno Daniela, le calze sono lavorate con i ferri a doppia punta: può scegliere la lunghezza con cui si trova più comoda. Buon lavoro!

01.09.2023 - 08:38

country flag Karin Rimmel wrote:

Skall det vara en eller två trådar när man stickar tån?

20.08.2023 - 12:10

country flag Kathryn Radmall wrote:

Cosy

22.01.2023 - 16:02

country flag Johanne wrote:

Sommerhussok

22.01.2023 - 12:35

country flag Ines wrote:

Leichte Früchte

19.01.2023 - 21:52