DROPS Super Sale - SAVE 30% on 5 soft merino yarns!

Toe on a knitted sock

Video thumbnail for Toe on a knitted sock
Basic decrease for toe, one of many variations.
We insert a marker each side with same number of sts on needles on upper and under foot.
Then dec for toe on each side of both markers and 2 K sts each side as follows – beg 3 sts before end of needle in first side: slip 1 st, K1, pass slipped st over, place marker, K1, on next needle K1, K2 tog. Repeat the dec on each side of foot on every row as in video, or on every other row for a longer toe, until 8 sts left on needle. Cut the thread, pull through remaining sts and fasten.

Patterns using this technique

DROPS Baby 45-23

DROPS Baby 45-23
DROPS 251-15

DROPS 251-15
DROPS 251-16

DROPS 251-16
DROPS Children 48-19

DROPS Children 48-19
Change language:

Video #77, listed in: Learn to knit, Socks and Slippers, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Ghislaine Drolet wrote:

Merci de votre vidéo cela m'a permis de comprendre comment faire la pointe des chaussettes.

16.01.2022 - 16:14

Country flag Stefania wrote:

Grazie! molto utile.

05.12.2021 - 18:24

Country flag Mme LEONE Annie wrote:

Ou trouver les explications détaillées écrites en français, aiguilles 3,5 ou 4 ?

15.01.2021 - 17:46

DROPS Design :

Bonjour Mme Leone, cliquez sur le menu juste entre la description de la vidéo et les modèles en exemple pour modifier la langue - pour ce qui est de la taille des aiguilles, tout dépend du modèle, ceci ne montre que la technique, suivez bien votre modèle . Bon tricot!

18.01.2021 - 11:37

Country flag Joan Taylor wrote:

I am doing the Tiny Toes pattern. I am fine until I start to work the 8cm to start the toe decrease. You say k over k and p over p. What does that mean? I have the ribbed part and the st. Stitch part. Do you mean continue the rib part and also the st. Stitch part. It is unclear. Then after the 8cm do you do all st. Stitch as the pattern picture shows ribbing? Do you switch to two needles when you say 20 on each needle to do toe decreasing. More details would be appreciated.

06.11.2020 - 06:53

DROPS Design :

Dear Mrs Taylor, you will now knit the knit stitches and purl the purl stitches, in other words you will continue in rib on upper foot and stocking stitch on under foot (as before). Before decreasing for toe, insert 2 markers on each side of socks (when worn) just as shown in this video, then continue (as in the video) in the round over all stitches (and how many needles you like to, but you can continue with 3 or 4 needles as before) until all decreases are done. Happy knitting!

06.11.2020 - 08:50

Country flag CLOCLO wrote:

JE SOUHAITERAI AVOIR UNE EXPLICATION DÉTAILLE JE DOIS TRICOTER UNE CHAUSSETTE POINTURE 46 AIG 4 OU 5 GROSSE LAINE .AVEC 2 AIGUILLES JE N ARRIVE PAS A FAIRE LA POINTE MERCI P.VOS EXPLICATIONS

09.11.2018 - 11:04

DROPS Design :

Bonjour Cloclo, divisez vos mailles en 2 parties et placez 2 marqueurs pour délimiter ces 2 zones: l'une est pour le dessus du pied et l'autre pour le dessous (quand on porte la chaussette). Diminuez ensuite comme indiqué et montré dans la vidéo: 1 m avant le marqueur, 1 m après le marqueur et répétez à l'autre marqueur. Pour la fréquence des diminutions, référez-vous au modèle. Bon tricot!

12.11.2018 - 11:08

Country flag Carlotta wrote:

I vostri video sono tutti molto utili,grazie

15.12.2014 - 00:52

Country flag VICKY wrote:

ESTA BONITO ES LO QUE BUSCABA COMO HACER EL TALON DE CALCETAS

30.06.2013 - 18:30

Country flag Francois wrote:

Merci de votre réponse,je ne vois pas les dimunitions de part et d'autre des mailles du dessus du pied là était ma question .

13.03.2013 - 12:19

DROPS Design :

Effectivement, on ne voit pas ces diminutions dans la vidéo, autant pour moi. Pour diminuer pour le pied, procédez comme indiqué dans les explications : en général on diminue avant et après les mailles du dessus du pied - différentes vidéos montrent les types de diminution employées. Pour toute aide plus personnalisée, n'hésitez pas à vous inscrire sur le forum DROPS. Bon tricot !

13.03.2013 - 15:03

Country flag Danielle Francois wrote:

Super les videos serait il possible d'avoir une video sur le coup de pied de la chaussette merci et bravo.

08.02.2013 - 21:45

DROPS Design :

Bonjour Madame François, cette vidéo existe et vous la trouverez dans l'index sous "Chaussettes au tricot - talon de base" où l'on montre les diminutions du talon puis comment on relève les mailles le long du talon. Les diminutions se font ensuite de part et d'autre des mailles du dessus du pied. Bon tricot !

09.02.2013 - 10:47

Country flag DROPS Design wrote:

Du starter med fellingen til tå når sokken er strikked ca fram til lilletå. Da deler du masketallet og setter merketrådene.

28.11.2011 - 08:54

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to start a sock with a flounce
3:51
How to start a sock with a flounce

In this DROPS video we show how to start a sock with a flounce, like the “Dainty Duo” socks in DROPS 229-19. We cast on with 2 strands, but continue with 1 strand. Then we knit 4 rounds and on the next round we knit all stitches together 2 by 2. Then we work a rib (knit 1 twisted/purl 1). These socks are worked in DROPS Fabel, but in the video, we work with a thicker yarn; DROPS Snow. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work after charts to the socks in DROPS 229-20
11:52
How to work after charts to the socks in DROPS 229-20

In this DROPS video we show how we work after chart A.1 (flounces) and A.2 (lace pattern) to the “Kissing Kate” socks in DROPS 229-20. We show the beginning and end after chart A.1, and in chart A.2 we show round 3, 4, 9 and 10. We use less stitches than it says in the pattern. These socks are worked in DROPS Nord but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work the slippers in DROPS 203-37
20:51
How to work the slippers in DROPS 203-37

In this DROPS video we show how to work the “Carrot Squash” slippers in DROPS 203-37. We have already cast on stitches for size 35/37 = US 4.5/6.5 and start the video by showing round 1 (only Knit). Then the rib, K1, P1. After the rib put 31 stitches on a stitch holder, work the other stitches back and forth. Then work these stitches, the new pickup stitches along the sides and the stitches from the stitch holder, and work around again. Decrease stitches and work around to finish measurement, bind off and fold the slipper and sew under foot in the outermost loop of the outermost stitch. These slippers are worked in DROPS Snow, the same yarn we use in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.