DROPS / 114 / 31

Chocolate Fudge by DROPS Design

Set comprises: DROPS hat and shoulder wrap knitted from side to side with cables and garter st in ”Eskimo”.

DROPS design: Pattern no EE-261.

HAT:
Size: S/M – L/XL
Head circumference:
approx 54 - 58 cm / 21¼” - 22¾”
Materials: DROPS ESKIMO from Garnstudio
150-150 g color no 23, tan

DROPS POINTED NEEDLES size 7 mm / US 10½ - or size needed to get 12 sts x 24 rows in garter st = 10 x 10 cm / 4’’ x 4’’.

SHOULDER WRAP:
Size: S/M - L/XL - XXL/XXXL
Materials: DROPS ESKIMO from Garnstudio
400-400-450 g color no 48m, beige mix

DROPS CIRCULAR NEEDLE (80 cm / 32’’) size 8 mm/US 11- or size needed to get 11 sts x 22 rows in garter st = 10 x 10 cm / 4’’ x 4’’.

DROPS BUFFALO HORN BUTTON no 536: 5 pcs.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (177)

100% Wool
from 2.85 $ /50g
DROPS Eskimo uni colour DROPS Eskimo uni colour 2.85 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Eskimo mix DROPS Eskimo mix 3.30 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Eskimo print DROPS Eskimo print 3.60 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.65$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
HAT:
--------------------------------------------------------
GARTER ST (back and forth on needle): K all rows.

PATTERN: See diagram M.1. Diagram shows the pattern from RS.
--------------------------------------------------------
--------------------------------------------------------

HAT: Worked from side to side, back and forth on needle. Work the first 2 sts from RS with double thread (to make edge firmer) in GARTER ST throughout - see above.
Cast on 38-42 sts on needle size 7 mm / US 10½ with Eskimo and work PATTERN as follows from RS: 2 garter sts – see above - M.1 (= 14 sts), 22-26 garter sts. Continue in pattern like this, AT THE SAME TIME work shortened rows, back and forth on needle, with start from RS as follows: * 2 rows on all sts, 2 rows on 36-40 sts, 2 rows on 34-38 sts, 2 rows on 31-35 sts *, repeat from *-*. REMEMBER THE GAUGE! Continue like this until there are 10-11 vertical repeats of M.1, piece measures approx 50-55 cm / 19¾”-21 5/8” where longest. Bind off loosely on the last row in the last pattern repeat.

ASSEMBLY: Sew cast on row to bind off row, edge to edge. Run a thread through sts at the top of hat, tighten and fasten.
--------------------------------------------------------

SHOULDER WRAP:
--------------------------------------------------------
GARTER ST (back and forth on needle): K all rows.

PATTERN: See diagram M.2. Diagram shows the pattern from RS.

BUTTONHOLES: Make buttonholes when piece measures 2 cm / 3/4’’ as follows from RS: Work 7-7-7 sts, bind off 1 st, * work 8-9-10 sts, bind off 1 st *, repeat from *-* a total of 4 times, finish with 3 sts = 5 buttonholes. Cast on new sts over bind off sts on return row.
--------------------------------------------------------
--------------------------------------------------------

SHOULDER WRAP: Worked from side to side, back and forth on circular needle. Cast on 47-51-55 sts on circular needle size 8 mm / US 11 with Eskimo. Work GARTER ST – see above - AT THE SAME TIME work the first 2 sts on every row from RS with double thread throughout. AT THE SAME TIME when piece measures 2 cm / 3/4’’ make BUTTONHOLES on next row from RS – see above! When piece measures 4 cm / 1½’’ inc as follows on row from WS: Work garter st on the first 4 sts, inc 6 sts evenly on the next 10 sts, garter st on the next 17-21-25 sts, inc 6 sts evenly on the next 10 sts, complete row in garter st = 59-63-67 sts.
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Continue in pattern and shortened rows as follows from RS: 2 garter sts, P 4 , M.2 (= 16 sts), P2, garter st on the next 15-19-23 sts, M.2 (=16 sts), 4 garter sts - AT THE SAME TIME work shortened rows starting on RS as follows: * 1 row on all sts, 1 row on 20 sts, turn, work return row on 20 sts, 1 row on all sts, 2 rows on 37-41-45 sts, 2 rows on 33-37-41 sts, 2 rows on 29-33-37 sts, 2 rows on all sts, 2 rows on 37-41-45 sts, 2 rows on 33-37-41 sts, 2 rows on 29-33-37 sts *, repeat from *-*. REMEMBER THE GAUGE! Continue in pattern like this. When piece measures 128-148-168 cm / 50 3/8”-58 1/8”-66” measured along bottom edge (adjust to after a full repeat of M.2) work next row from RS as follows: Work garter st, AT THE SAME TIME dec 6 sts evenly on all cables = 47-51-55 sts. Continue in garter st on all sts. Bind off when edge in garter st measures 4 cm / 1½’’. Sew on buttons.


Diagram

All measurements in charts are in cm.

= K from RS, P from WS
= P from RS, K from WS
= slip 4 sts on cable needle behind piece, K4, K4 from cable needle
= slip 4 sts on cable needle in front of piece, K4, K4 from cable needle

Joanna 03.02.2019 - 08:20:

Hi, I only knit on straight needles. Should I follow the instructions then join it or would that not work? Thank you.

DROPS Design 04.02.2019 kl. 12:03:

Dear Joanna both hat and shoulder piece are worked back and forth on circular needle to get enough room for all sts. So that you can use straight needles, just make sure to keep correct tension since the sts will be more tight. Happy knitting!

Laura 01.02.2019 - 17:52:

Scusa la domanda forse sciocca, nel primissimo ferro accorciato dove dice lavorare le 20 maglie devo considerare anche le due maglie del bordo lavorate con in dippio filo o quelle non le calcolo?

DROPS Design 01.02.2019 kl. 21:01:

Buongiorno Laura. Quando deve lavorare 20 m, sta lavorando sul rovescio. Più avanti lavorerà i ferri accorciati sul diritto e quindi anche sulle 2 m lavorate con 2 fili. Queste maglie vanno contate nel numero delle maglie da lavorare. Buon lavoro!

Laura 31.01.2019 - 07:23:

Buon giorno, nella parte dei ferri accorciati per lo scalda spalle ci sono dei ferri da lavorare su tutte le maglie, devo considerare quelli per il diagramma m2 diciamo non quello sul collo? Spero di essermi spiegata. Grazie siete fantastici

DROPS Design 31.01.2019 kl. 10:25:

Buongiorno Laura. Quando lavora il ferro su tutte le maglie, lavora anche sul diagramma M2 non vicino al collo, seguendo il ferro successivo a quello lavorato in precedenza su queste maglie, così il motivo prosegue correttamente. Buon lavoro!

Laura 30.01.2019 - 12:21:

Altro quesito quando lavoro i ferri accorciati devo considerarli anche come ferri della lavorazione degli schemi? Grazie

DROPS Design 30.01.2019 kl. 14:29:

Buongiorno Laura. Sì, sulle maglie che lavora con i ferri accorciati, segue lo schema. Buon lavoro!

Laura 30.01.2019 - 12:09:

Buon giorno, avrei un dubbio, ho letto attentamente le spiegazioni, i ferri accorciati li eseguo in contemporanea alla lavorazione di m1 m2?

DROPS Design 30.01.2019 kl. 14:28:

Buongiorno Laura. Sì i ferri accorciati vengono lavorati insieme a M1 e M2. Buon lavoro!

Grace Wong 02.11.2018 - 20:55:

Can this shoulder wrap wear the button row at the centre of front?

DROPS Design 05.11.2018 kl. 10:52:

Dear Mrs Wong, sure, you can wear it with the buttons in the middle front or on one side as shown in the picture. Happy knitting!

Lola 18.10.2018 - 14:30:

Bonjour, Voilà qui est clair comme explications ! Merci infiniment ; je viens de terminer le bonnet, le modèle est superbe

Lola 16.10.2018 - 14:03:

Bonjour, Pour les rangs raccourcis, s'agit-il de la methode base (voir vidéo du site) , ou bien doit on glisser les M en attente de l'aiguille droite sur celle de gauche, on tricoterait alors ces mêmes M avec la Torsade sur l'envers, ensuite on ferait un tour complet sur l'endroit etc..... Pour la réponse vous me dites methode de base ou choix N°2, ça sera clair pour moi Merci

DROPS Design 16.10.2018 kl. 15:15:

Bonjour Lola, c'est la méthode de base que vous trouvez en vidéo sur notre site. - le bonnet tout comme le chauffe-épaules se tricotent en allers et retours, pas en rond (donc pas de "tour". Bon tricot!

Evelyn 15.10.2018 - 14:19:

Très simple ma question, je vais la formuler autrement. Tricote t-on les 2 M au point mousse et M1, et après la dernière maille à l'envers de la torsade, on commencerait les rangs raccourcis, pour finir le rang endroit au point mousse et faire un rang retour etc.... Merci

DROPS Design 15.10.2018 kl. 15:56:

Bonjour Evelyne, les rangs raccourcis se tricotent ainsi ex sur 36-40 m (en commençant sur l'endroit): 2 m point mousse, M.1 (= 14 m) et 20-24 m point mousse (on tourne et on tricote le rang envers sur ces mailles) = les 14 m de M.1 seront tricotées tous les rangs. Bon tricot!

Evelyn 15.10.2018 - 12:48:

Oui, j'ai bien compris pour le Nbre de mailles. Ce que je ne comprends pas c'est ou commence ces rangs raccourcis, Dès le debut de la Torsade ou après celle-ci sur les mailles en mousse. Repondez moi clairement, oui ou non, là je comprendrais Merci

DROPS Design 15.10.2018 kl. 14:07:

Bonjour Evelyn, en fait, je ne comprends pas votre question, les rangs raccourcis se tricotent comme indiqué, et en même temps, vous tricotez la torsades sur les 14 m après les 2 m du début du rang sur l'endroit, en croisant les mailles tous les 4 rangs comme indiqué dans le diagramme. Bon tricot!

Post a comment to pattern DROPS 114-31

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.