DROPS Bomull-Lin
53% Cotton, 47% Linen
from 3.45 $ /50g

Order

Order

Get the yarn to make this pattern from 37.95$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Late Spring

Knitted DROPS jacket with lace pattern in “Bomull-Lin”. Size: S - XXXL.

DROPS 167-15
DROPS design: Pattern no l-140
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS BOMULL-LIN from Garnstudio
550-600-650-700-750-800 g color no 11, beige

DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (80 cm / 32'') SIZE 5 mm/US 8 - or size needed to get 17 sts x 22 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (80 cm / 32'') SIZE 4.5 mm/US 7 - for edge in garter st.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

You might also like...

Women Jackets & Cardigans Long Jackets a-shape bottom up lace sewn in sleeves v-neck

DROPS Bomull-Lin
53% Cotton, 47% Linen
from 3.45 $ /50g

Order

DROPS Needles & Hooks

Order

Get the yarn to make this pattern from 37.95$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. Convert from inches to cm here. There are different terms for crocheting in American and British English. If this pattern includes crochet, convert "crochet terms" here. See this pattern in British English here.

GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

PATTERN:
See diagrams A.1 to A.3. The diagrams show all rows in pattern seen from RS.

DECREASE TIP:
All dec are done from RS!
Dec as follows before band: Work until 2 sts remain before band, K 2 tog.
Dec as follows after band: Slip 1 st as if to K, K 1, psso.

KNITTING TIP:
Work 1 short row over the 4 sts in garter st in bands as follows (beg from RS): K 4 band sts, turn piece, tighten yarn and K back over the 4 sts, turn piece and work as before over all sts, turn piece, K 4 band sts, turn piece, tighten yarn and K back over the 4 sts. That way the ridges in band will not contract as much.

INCREASE TIP (applies to sleeve):
Work until 2 st remains before marker, 1 YO, K 4 (marker is between these sts), 1 YO. K YOs twisted on next round.
----------------------------------------------------------

JACKET:
Worked back and forth on circular needle.
Cast on 202-220-240-258-278-298 sts (includes 4 band sts in each side) on circular needle size 4.5 mm / US 7 with Bomull-Lin. Work 3 ridges in GARTER ST - see explanation above, on last row from RS dec 11-11-13-13-15-17 sts evenly (but not over bands) = 191-209-227-245-263-281 sts. Switch to circular needle size 5 mm / US 8. Now work pattern as follows: 4 band sts in garter st, K 1, A.1a (= 10 sts), A.1b (= 18 sts) 9-10-11-12-13-14 times in width, A.1c (= 9 sts), K 1, 4 band sts in garter st. REMEMBER THE KNITTING GAUGE
When A.1 has been worked vertically, continue as follows: Work A.2 (= 8 sts) with 4 band sts in garter st in each side - NOTE: Work last st before band as 1st st in A.2. - On 3rd row dec 6-8-10-12-14-16 sts evenly and on 15th row dec 12-10-8-6-4-2 sts evenly = 173-191-209-227-245-263 sts. When A.2 has been worked vertically, continue as follows: 4 band sts in garter st, K 1, A.3a (= 10 sts), A.3b (= 18 sts) 8-9-10-11-12-13 times in width, A.3c (= 9 sts), K 1, 4 band sts in garter st. When A.3 has been worked vertically, work A.2 (= 8 sts) with 4 band sts in garter st in each side - NOTE: Work last st before band as 1st st in A.2. On 3rd row dec 12-14-16-10-12-14 sts evenly and on 15th row dec 6-4-2-8-6-4 sts evenly = 155-173-191-209-227-245 sts. When A.2 has been worked vertically, continue as follows: 4 band sts in garter st, K 1, A.3a (= 10 sts), A.3b (= 18 sts) 7-8-9-10-11-12 times in width, A.3c (= 9 sts), K 1, 4 band sts in garter st. When A.3 has been worked vertically, work 2 rows in stockinette st inside 4 band sts in garter st in each side. Then work 2 ridges AT THE SAME TIME work short rows over each band – READ KNITTING TIP, and dec 9-14-20-22-19-15 sts evenly on first row (but not over band sts) = 146-159-171-187-208-230 sts. Then work in stockinette st with 4 band sts in garter st in each side until piece measures 49 cm / 19 1/4'' in all sizes. Now work as follows: 4 band sts in garter st, stockinette st over the next 32-35-38-42-47-53 sts (= right front piece), bind off the next 5 sts for armhole, stockinette st over the next 64-71-77-85-96-106 sts (= back piece), bind off the next 5 sts for armhole, stockinette st over the next 32-35-38-42-47-53 sts, 4 band sts in garter st (= left front piece). Now finish each part separately.

BACK PIECE:
= 64-71-77-85-96-106 sts. Now bind off for armholes in each side on every other row as follows: 2 sts 1-1-2-4-6-8 times and 1 st 0-3-3-2-3-3 times = 60-61-63-65-66-68 sts. When piece measures 63-64-65-66-67-68 cm / 24¾''-25¼''-25½''-26''-26 3/8''-26¾'', work the first 19-19-19-20-20-20 sts as before, work in garter st over the next 22-23-25-25-26-28 sts, work the remaining 19-19-19-20-20-20 sts as before. Continue like this until 2 ridges have been worked over the middle 22-23-25-25-26-28 sts. Work next row from RS as follows: Work the first 22-22-22-23-23-23 sts and slip them on a stitch holder, bind off the next 16-17-19-19-20-22 sts for neck and work the remaining 22-22-22-23-23-23 sts. There are now 3 sts in garter st towards the neck. Then finish each shoulder separately. On next row from neck dec 1 st inside 3 st in garter st towards the neck = 21-21-21-22-22-22 sts. When piece measures 66-67-68-69-70-71 cm / 26"-26½"-26 3/4"-27"-27½"-28", work 1 ridge over all sts. Bind off. Work the other shoulder the same way.

LEFT FRONT PIECE:
= 36-39-42-46-51-57 sts. Continue in stockinette st with 4 band sts and bind off armhole in the side as on back piece AT THE SAME TIME at the end of next row from RS beg dec for V-neck - READ DECREASE TIP, as follows: Dec for neck every other row 13-13-14-14-15-16 times. When all dec are done, 21-21-21-22-22-22 sts remain for shoulder. When piece measures 66-67-68-69-70-71 cm / 26"-26½"-26 3/4"-27"-27½"-28", work 1 ridge over all sts. Bind off.

RIGHT FRONT PIECE:
Work as left front piece but reversed.

SLEEVE:
Worked in the round on double pointed needles. Cast on 32-34-36-37-39-41 sts on double pointed needles size 4.5 mm / US 7 with Bomull-Lin. Work 2 ridges in GARTER ST - see explanation above. Switch to double pointed needles size 5 mm / US 8 and work in stockinette st. Insert 1 marker at the beg of the round. When piece measures 7-7-7-8-7-9 cm / 2 3/4"-2 3/4"-2 3/4"-3"-2 3/4"-3½", inc 1 st on each side of marker – see INCREASE TIP. Repeat inc every 3-3-2½-2-2-1½ cm / 1 1/8"-1 1/8"-7/8"-3/4"-3/4"-½" 10-11-12-14-15-15 more times = 54-58-62-67-71-73 sts. When piece measures 42-41-42-40-40-39 cm / 16½"-16"-16½"-15 3/4"-15 3/4"-15 1/4" (shorter measurements in the larger sizes because of longer sleeve cap and wider shoulders), bind off for sleeve cap at beg of every row in each side as follows: bind off 3 sts 1 time, 2 sts 6-6-7-7-7-8 times and 1 st 0-1-0-2-3-2 times, then bind off 2 sts in each side until piece measures 49-49-50-50-51-51 cm / 19 1/4"-19 1/4"-19 3/4"-19 3/4"-20"-20", then bind off 3 sts 1 time in each side. Bind off the remaining sts, piece measures approx. 50-50-51-51-52-52 cm / 19 3/4"-19 3/4"-20"-20"-20½"-20½". Make another sleeve the same way.

ASSEMBLY:
Sew shoulder seams with grafting/kitchener sts and sew in sleeves.

TIES:
Cut 3 strands Bomull-Lin, approx. 120 cm / 47 1/4"'' long, thread them half way through inside the 4 band sts in garter st on left front piece (between the last 2 ridges on front piece), make a braid of approx. 35 cm / 13 3/4'', tie a knot, use the rest of strand as a tassel. Do the same on right front piece.

Diagram

All measurements in charts are in cm.

	= K from RS, P from WS
	= P from RS, K from WS
	= 1 YO between 2 sts On next row P the YO. It should make hole.
	= K 2 tog
	= slip 1 st as if to K, K 1, psso
	= slip 1 st as if to K, K 2 tog, psso
	= decrease row - see explanation in pattern

© 1982-2024 DROPS Design A/S We reserve all rights. This document, including all its sub-sections, has copyrights.
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.

Each of our patterns has specific tutorial videos to help you.

These step-by-step tutorials might also help you:

Do you have a question? See a list of frequently asked questions (FAQ)

Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

What size should I knit?

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Why does my garment pill?

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Have you finished this pattern?
Tag your pictures with #dropspattern or submit them to the #dropsfan gallery.

Comments / Questions (5)

Malin wrote:

Hej! Den räta maskan innan framkanten( maska 5 från båda håll) stickas den rät även från avigsidan? Alltså som rätstickning, eller stickas den för att vara rät från framsidan ( utom i A2 då den ingår i mönstret?

05.07.2023 - 15:16

DROPS Design answered:

Hej Malin, den stickas rät från rätsidan och avig från avigsidan :)

07.07.2023 - 10:10

Mucsi Anikó wrote:

A minta elején, a tűváltás után L-es méretnél 227 szem van a tűn, az A1.a minta 10, A1.b 18, A1.c 9 szem. A1.b 11-szer ismétlődik. Így a soron 10+(11×18)+9=217 szem van+ 2×4 szem a gomboláspánthoz, az összesen 225 szem. A fennmaradó két szemnek így nincs helye.

01.07.2023 - 21:35

Liv Schindler wrote:

In der Anleitung wird nur Muster a1 bis a3 zum Stricken angegeben ...Dann soll man glatt bis zum Ärmelausschnitt stricken...Auf dem Bild sieht man aber Muster bis zum Ärmeöausschnitt ...hiiiilfe ich bin Newbie 😨

22.10.2016 - 11:38

Liebe Frau Schindler, die Diagramme werden so in der Höhe gestrickt: 1 x A.1, 1xA.2, 1xA.3, 1xA.2, 1xA.3, 2 Krausrippe (mit Abnahme) und dann bis 49 cm glatt stricken.

24.10.2016 - 09:31

Albers wrote:

Le schéma du gilet avec ses dimensions dans les différentes tailles n'aurait-il pas été oublié ?

28.01.2016 - 15:32

Bonjour Mme Albers, le schéma des mesures a été ajouté maintenant. Merci. Bon tricot!

29.01.2016 - 09:59

Ylva Gustafsson wrote:

Vacker! Fin silhuett!

17.12.2015 - 15:54

Late Spring

Knitted DROPS jacket with lace pattern in “Bomull-Lin”. Size: S - XXXL.

You might also like...

Pattern instructions

Diagram

How to read a schematic drawing

How to read knitting diagrams

How to measure your tension/gauge

How to change yarns or yarn amounts

How to choose yarn!

Can I adapt a pattern for circular needles into straight needles?

How to increase/decrease evenly!

How can I get help with a DROPS pattern?

How to cast on

How to knitt stitches

How to purl stitches

How to decrease stitches

How to cast off from the right side

How to cast off from the wrong side

Post a comment to pattern DROPS 167-15

Comments / Questions (5)

Late Spring

Knitted DROPS jacket with lace pattern in “Bomull-Lin”. Size: S - XXXL.

Diagram explanations

Do you need help with this pattern?

@dropsdesign on Instagram