DROPS Extra / 0-1131

Carter by DROPS Design

Men's knitted jumper in DROPS Belle, with raglan and worked top down. Size: S - XXXL.

DROPS design: Pattern no vs-004
Yarn group B
Size: S - M - L - XL - XXL - XXXL
DROPS BELLE from Garnstudio
450-550-600-650-750-800 g colour no 09, beige

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 and 80 cm) SIZE 4 mm - or size needed to get 21 sts x 28 rows in stocking st = 10 x 10 cm.
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 and 80 cm) SIZE 3.5 mm - for rib.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!

53% Cotton, 33% Viscose, 14% Linen
from 1.80 £ /50g
DROPS Belle uni colour DROPS Belle uni colour 1.80 £ /50g
Wool Warehouse Direct Ltd
DROPS Needles & Hooks
You can get the yarn to make this pattern from 16.20£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = 2 rows K.

Inc for raglan by working a YO on each side of A.1 in every raglan. On next round K YOs twisted to avoid holes.

See diagram A.1.

Dec 1 st before marker as follows: Work until 2 sts remain before marker, slip 1 st as if to K, K 1, psso.
Dec 1 st after marker as follows: K 2 tog.

Worked in the round on circular needle, top down. Cast on 114-117-120-123-126-129 sts on circular needle size 3.5 mm with Belle. K 1 round. Then work rib (= K 1/P 2). Switch to circular needle size 4 mm when piece measures 2 cm. Now continue piece in stocking st. On first round dec 18-17-16-15-14-13 sts evenly = 96-100-104-108-112-116 sts (this is done to give the garment better shape). On next round, inc 24-26-30-40-48-70 sts evenly = 120-126-134-148-160-186 sts. Insert 1 marker at beg of round = mid back. On next round work as follows from mid back: K 17-18-20-24-27-33 (= half back piece), A.1, K 6, A.1 (= sleeve), K 34-37-41-48-54-67 (= front piece), A.1, K 6, A.1 (= sleeve ), K 17-19-21-24-27-34 (= half back piece). Continue pattern like this while AT THE SAME TIME working an elevation in the back as follows: Work 8 sts past marker, turn, tighten yarn and work 16 sts back, turn, tighten yarn and work 24 sts, turn, continue to work 8 sts more for every turn until a total of 64 sts have been worked after last turn, turn and work 1 round over all sts until mid back again. On next round start inc for RAGLAN – see explanation above - NOTE: Inc differently on body and sleeves. REMEMBER THE KNITTING TENSION

Inc every round 0-4-4-4-4-4 times in total, then every other round 28-27-29-30-32-33 times. There are 90-99-107-116-126-141 sts on front and back piece.

Inc every other round 16-19-21-22-24-27 times, then every 4th round 6-5-5-5-5-4 times. There are 70-74-78-80-84-88 sts for each sleeve.

When all inc are done there are 320-346-370-392-420-458 sts on needle. On next round, work as follows: K 45-49-53-58-63-70, slip the next 70-74-78-80-84-88 sts on a stitch holder for sleeve, cast on 8 new sts under sleeve (insert a marker in the middle of these new sts), K 90-99-107-116-126-141, slip the next 70-74-78-80-84-88 sts on a stitch holder for sleeve, cast on 8 new sts under sleeve (insert a marker in the middle of these new sts), K 45-50-54-58-63-71 = 196-214-230-248-268-298 sts. NOW MEASURE PIECE FROM HERE!

When piece measures 4 cm, dec 1 st on each side of markers in the side - READ DECREASE TIP (= 4 sts dec). Repeat dec every 14-14-14-30-30-30 cm 2-2-2-1-1-1 more times = 184-202-218-240-260-290 sts. When piece measures 42-43-44-45-46-47 cm, K 1 round while AT THE SAME TIME inc 20-17-16-15-16-13 sts evenly = 204-219-234-255-276-303 sts. Switch to circular needle size 3.5 mm. Work rib = K 1/P 2. When rib measures 4 cm, loosely cast off K over K and P over P.

Worked in the round on double pointed needles.
Slip the 70-74-78-80-84-88 sts from stitch holder back on double pointed needles size 4 mm. Cast on 8 new sts under sleeve, insert 1 marker in the middle of the new sts = 78-82-86-88-92-96 sts. NOW MEASURE PIECE FROM HERE! Work in stocking st AT THE SAME TIME continue A.1 as follows: Inc 1 YO before A.1 up towards middle of sleeve, K 2 tog after A.1 towards under sleeve (i.e. the 8 new sts cast on under sleeve). This is done so that A.1 meets under sleeve and disappears, repeat dec every other round until all sts in both A.1 are gone. K YO twisted on next round, it should not make holes. When piece measures 4 cm, dec 1 st on each side of marker - READ DECREASE TIP. Repeat dec every 3½-3½-3-3-2½-2½ cm 11-12-13-13-14-15 more times = 54-56-58-60-62-64 sts.

Work in stocking st until piece measures 51-50-50-50-49-49 cm. K 1 round while AT THE SAME TIME inc 6-4-5-3-4-2 sts evenly = 60-60-63-63-66-66 sts. Switch to double pointed needles size 3.5 mm and work rib = K 1/P 2. Cast off when piece measures 55-54-54-54-53-53 cm (shorter measurements in the larger sizes because of wider shoulders). Work the other sleeve the same way.

Cast on 23 sts (incl 1 edge st in each side) on double pointed needles size 4 mm with Belle. Continue in stocking st back and forth with 1 edge st in GARTER ST - see explanation above - in each side of piece. When piece measures 8 cm, adjust so that next row is from WS, inc 4 sts evenly from WS = 27 sts. Switch to double pointed needles size 3.5 mm and work as follows from RS: 1 edge st in garter st, rib = K 1/P 2 until 2 sts remain, finish with K 1 and 1 edge st in garter st. When piece measures 10 cm, cast off K over K and P over P.

Sew the openings under the sleeves. Sew the pocket on the left sleeve, approx 45 cm from cast off edge.


= K from RS, P from WS
= P from RS, K from WS

Marie-Laure 25.08.2019 - 20:20:

Bonjour, J'ai commencé à tricoter le modèle Carter en taille S et je dois commencer à augmenter pour le raglan dos/devant. Selon les explications, il faut augmenter "0 fois au total tous les tours, puis 28 fois tous les 2 tours". Cela veut-il dire que je commence directement les 28 augmentations tous les 2 tours ? Merci d'avance pour vos éclaircissements.

DROPS Design 26.08.2019 kl. 09:02:

Bonjour Marie-Laure! En taille S vous commencez directement par les 28 augmentations tous les 2 tours. Bon tricot!

Morgan 25.06.2019 - 01:20:

Hej, Jag förstår inte hur jag ska sticka början på tröjan. Efter ökningen så skall det stickas både förhöjning i ryggen och som jag förstår det även ett antal hela varv. Som jag fattar det kommer förhöjningen rakt in i A.1. Ska jag sticka 8 m, vända, sticka 16 tilllbaka och sen vända och sticka ett helt varv med mönster och allt? Är det så jag ska tolka beskrivningen. Och hur många varv totalt skall stickas innan ökningen till raglan?

DROPS Design 26.06.2019 kl. 08:32:

Hei Morgan. Du skal strikke dette samtidig. Etter omgangen med økinger strikkes forhøyning midt bak som forklart: strikk de første 8 maskene, snu og strikk 16 masker fra vrangen, snu og strikk 24 masker fra retten osv til du har strikket over 64 masker. Siden bakstykket kun går over 34-37-41-48-54-67 masker vil forhøyningen gå over deler av ermene (unntatt str XXXL), og raglanlinjene. Når du kommer dit, skal du strikke A.1 over raglanlinjene som forklart. Det kan lønne seg å sette merker ved hver A.1 så holder du lettere oversikt. Når forhøyningen er ferdig, strikkes over alle masker som forklart på starten. God fornøyelse

Barbara 04.04.2019 - 08:05:

Buongiorno, ho ripreso le maglie lasciate in attesa delle maniche ma non riesco a capire come far scomparire il diagramma A1 sottomanica . In particolare: " proseguire con il diagramma A.1 come segue: aumentare facendo 1 m gettata prima del diagramma A.1 verso il centro della manica, lavorare 2 m insieme a dir dopo il diagramma A.1 verso il sotto manica (quindi le 8 nuove m avviate sotto la manica). In questo modo i diagrammi A.1 ai lati della manica, si uniscono e scompaiono nel sotto manica"

DROPS Design 04.04.2019 kl. 08:39:

Buongiorno Barbara, deve lavorare come indicato: lavorando 2 maglie insieme dopo il diagramma A.1, e continuando con queste diminuzioni, il diagramma A. 1 scomparirà gradualmente. Buon lavoro!

Rossella 28.01.2019 - 20:47:

Per gli aumenti per il raglan quando viene detto di aumentare ogni 2 giri significa fare un giro senza aumenti e il secondo giro aumentare o fare due giri senza aumenti e aumentare il terzo?

DROPS Design 28.01.2019 kl. 21:06:

Buongiorno Rosella. Lavora un giro senza aumenti e al secondo giro aumenta. Buon lavoro!

Filippo 23.01.2019 - 22:24:

Non riesco a trovare i ferri a doppia punta da 40 cm per fare le maniche, si possono usare quelli da 30 cm o altri tipi di ferri?

DROPS Design 23.01.2019 kl. 23:36:

Buonasera Filippo. Può usare i ferri da 30 cm oppure anche ferri circolari. Buon lavoro!

Joe73 07.12.2018 - 13:02:

Guten Tag, für die Ärmel : man macht Umschläge und Abnahmen „bis alle M von beiden A1 weg sind“ Dann steht „bei einer Länge von 4 cm beidseitig des Markierer je 1 M abnehmen“. Wenn ich alle M von A1 abgenommen habe, ist die Länge mehr als 4 cm. Muss ich beide Abnahmeprozesse gleichzeitig machen? Danke!

DROPS Design 07.12.2018 kl. 14:36:

Liebe Joe73, auch wenn Sie mahr als 4 cm brauchen, um A.1 abzunehmen, beginnen Sie die Abnahmen für den Ärmel immer nach 4 cm, sonnst könnte die Ärmel zu breit sein. Viel Spaß beim stricken!

Edw 06.10.2018 - 21:07:

Bonjour, Je suis arrivée aux manches mais je ne comprends pas trop les explications des jetés et les 2 m ensembles afin que les A1 se rejoignent ... à quel moment faut il faire ça ? Il y a qu’un jeté et qune diminution (2 m ensembles) à faire (soit après et avantage les 8 m rajoutées ) ? Ou bien faut le faire entre chaque A1? Merci pour votre aide

DROPS Design 08.10.2018 kl. 08:42:

Bonjour Edw, sous les manches, vous allez augmenter le nombre de mailles en jersey et diminuer le nombre de mailles tricotées dans A.1: faites 1 jeté avant le A.1 en fin de tour (= on augmente le nombre de m jersey), tricotez jusqu'à 2 m avant le marqueur, diminuez 1 m, marqueur, diminuez 1 m, tricotez les mailles restantes de A.1 et faites 1 jeté avant le jersey = vous augmentez 2 m par tour (côté jersey) et diminuez 2 m (celles de A.1, au milieu sous la manche). Bon tricot!

Isabella 28.07.2018 - 09:32:

Sempre sull’alzata: quello che continuo a non capire bene è cosa significhi “allo stesso tempo”. Il lavoro procede in tondo, l’alzata invece richiede di tornare avanti e indietro. Questo non crea due fori ai lati dell’alzata?

Isabella 22.07.2018 - 20:26:

Salve, ho bisogno di aiuto perché non capisco cosa sia l’alzata sul dietro, e come si unisca al resto. Forse potrebbe aiutare un’immagine o uno schizzo del dietro. Grazie

DROPS Design 22.07.2018 kl. 20:41:

Buonasera Isabella. Un'alzata consiste nel lavorare alcuni ferri solo sul numero di maglie indicate per rendere lo scollo sul dietro leggermente più alto rispetto allo scollo sul davanti e garantire una vestibilità migliore al capo. Buon lavoro!

Edw 13.04.2018 - 12:15:

Bonjour, Super j’ai bien fais ça! 😀 Merci pour vos réponses rapides !

Post a comment to pattern DROPS Extra 0-1131

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.