DROPS / 114 / 8

Viking Knots by DROPS Design

DROPS jumper with cables in ”Alpaca” with 3/4 sleeves or long sleeves. Size S - XXXL.

Tags: cable, sweaters, v-neck,

DROPS design: Pattern no Z-442.
--------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 80-88-96-106-118-130 cm / 31½’’-34 5/8’’-37¾’’-41¾’’-46½’’-51’’
Full length: 57-60-62-63-65-68 cm / 22½”-23 5/8”-24 3/8”-24¾”-25½”-26¾”

Materials: DROPS ALPACA from Garnstudio
Color no 618, light beige:
3/4 sleeves: 250-300-350-350-400-450 g
Long sleeves:300-350-400-400-450-500 g

DROPS POINTED NEEDLES size 3 mm / US 2or3 – or size needed to get 24 sts x 32 rows in stockinette st = 10 x 10 cm / 4’’ x 4’’.
DROPS POINTED NEEDLES size 2.5 mm / US 1 – for rib.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (106)

100% Alpaca
from 3.70 $ /50g
DROPS Alpaca uni colour DROPS Alpaca uni colour 3.70 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Alpaca mix DROPS Alpaca mix 3.90 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 22.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
See diagram M.1 and M.2. Diagram shows the pattern from RS.
--------------------------------------------------------
--------------------------------------------------------

BACK PIECE:
Worked back and forth on needle. Cast on 107-121-135-142-163-177 sts (includes 1 edge st each side) on needle size 2.5 mm / US 1 with Alpaca. Work rib as follows (first row = RS): 1 edge st, * K3, P4 *, repeat from *-* and finish with 1 edge st. When rib measures 2 cm / 3/4’’ K 1 row from RS, AT THE SAME TIME dec 9-13-17-12-19-19 sts evenly = 98-108-118-130-144-158 sts. Change to needle size 3 mm / US 2or3.
P 1 row from WS and continue in stockinette st with 1 edge st each side. When piece measures 9 cm / 3½’’ dec 1 st each side, repeat the dec on every 2 cm / 3/4’’ a total of 5 times = 88-98-108-120-134-148 sts. When piece measures 20-21-21-20-20-21 cm / 8”-8¼”-8¼”-8”-8”-8¼” inc 1 st each side, repeat the inc on every 3-3-3.5-4-4.5-4.5 cm /
1 1/8''-1 1/8''-1¼''-1½''-1¾''-1¾'' a total of 5 times = 98-108-118-130-144-158 sts. When piece measures 38-40-41-41-42-44 cm / 15”-15¾”-16 1/8”-16 1/8”-16½”-17¼” bind off 4 sts each side for armhole and bind off for armhole each side on every other row: 4 sts 0-0-0-1-1-2 times, 2 sts 2-3-5-6-8-9 times and 1 st 0-2-2-1-2-2 times = 82-84-86-88-92-94 sts. Continue in stockinette st on all sts. When piece measures 54-57-59-60-62-65 cm / 21¼”-22½”-23¼”-23 5/8”-24 3/8”-25½” bind off the middle 32-34-34-36-38-40 sts for neck and complete each shoulder separately. Bind off 1 st on neckline on every other row 2 times = 23-23-24-24-25-25 sts left on shoulder. Bind off loosely when piece measures 57-60-62-63-65-68 cm / 22½”-23 5/8”-24 3/8”-24¾”-25½”-26¾”.

FRONT PIECE:
Cast on and work like back piece until piece measures 20-21-21-20-20-21 cm / 8”-8¼”-8¼”-8”-8”-8¼”. On next row inc 1 st each side, repeat the inc on every 3-3-3.5-4-4.5-4.5 cm / 1 1/8''-1 1/8''-1¼''-1½''-1¾''-1¾'' a total of 5 times = 98-108-118-130-144-158 sts. Continue in stockinette st with 1 edge st each until piece measures 33-34-35-36-39-40 cm / 13”-13 3/8”-13¾”-14¼”-15¼”-15¾”. Now continue as follows (from RS): 1 edge st, 33-38-43-49-56-63 stockinette sts, M.1 (= 30 sts), 33-38-43-49-56-63 stockinette sts and 1 edge st. AT THE SAME TIME when piece measures 38-40-41-41-42-44 cm / 15”-15¾”-16 1/8”-16 1/8”-16½”-17¼” bind off for armhole each side as described for back piece. Continue up to arrow-A in M.1. On next row from RS bind off for neck as follows: work the first 24 sts of M.1, bind off 2 sts (= mid front) and work the remaining 24 sts of M.1 (work remaining sts in stockinette st as before). Insert a marker in piece, and now complete each side separately.

LEFT FRONT PIECE:
Continue back and forth on needle in stockinette st and M.1 as before – remember to bind off for armhole at the side! AT THE SAME TIME on next row from mid front dec 1 st for neck. Continue to arrow-B in diagram for M.1. Now continue with 15 sts rib as shown in M.1, work remaining sts in stockinette st as before. AT THE SAME TIME dec 1 st for neck inside the 15 sts in rib, and repeat the dec on every 4th row 3-4-4-5-6-7 times = 38-38-39-39-40-40 sts.
Continue until piece measures 11-12-12-13-13-14 cm / 4 3/8”-4¾”-4¾”-5 1/8”-5 1/8”-5½” from marker (adjust to length of armhole on back piece). Now bind off 23-23-24-24-25-25 sts from shoulder towards neckline = 15 sts left on needle. Continue back and forth on needle in rib as before on these 15 sts. Bind off loosely with K over K and P over P after approx 7-7-7-8-8-8 cm / 2¾’’-2¾’’-2¾’’-3 1/8’’- 3 1/8’’- 3 1/8’’ (measured from shoulder).

RIGHT FRONT PIECE:
Like left front piece but mirrored.

ASSEMBLY:
Sew shoulder seams.

3/4 SLEEVES:
Worked back and forth on needle.
LEFT SLEEVE:
Cast on 65-65-72-72-72-79 sts on needle size 2.5 mm / US 1 with Alpaca. Work rib as follows (first row = RS): 1 edge st, * P4, K3 *, repeat from *-* on 21-21-28-28-28-28 sts, M.2 (= 18 sts), K3, *P4, K3 *, repeat from *-* on the next 21-21-21-21-21-28 sts and 1 edge st. Continue like this up to Arrow-C in M.2. There are now 73-73-80-80-80-87 sts on needle. Change to needle size 3 mm / US 2or3. Continue as follows (from RS): 1 edge st, 21-21-28-28-28-28 stockinette sts, M.2 (= 26 sts), 24-24-24-24-24-31 stockinette sts and 1 edge st. Work 1 vertical repeat of M.2 like this = 65-65-72-72-72-79 sts on needle. Insert a marker, and now measure piece from here.
Continue in stockinette st with 1 edge st each side. AT THE SAME TIME when piece measures approx 2 cm / 3/4’’ from marker inc 1 st each side, repeat the inc on every 1.5-1-1-0.5-0.5-0.5 cm / 5/8”-3/8”-3/8”-1/4” -1/4” -1/4” a total of 8-11-11-14-17-17 times = 81-87-94-100-106-113 sts. When piece measures 17-16-16-15-14-12 cm / 6¾”-6¼”-6¼”-6”-5½”-4¾” from marker (less for the larger sizes because of longer sleeve cap and wider shoulder) bind off 4 sts each side. Bind off for sleeve cap at the beg of every row: 2 sts 4-5-5-5-4-4 times each side and 1 st 3-3-5-5-11-14 times each side, then 2 sts each side until piece measures 24-24-25-25-26-26 cm / 9½”-9½”-9¾”-9¾”-10¼”-10¼”, now bind off 4 sts each side 1 time, and bind off remaining sts. Piece measures a total of approx 43-43-44-44-45-45 cm / 17”-17”-17¼”-17¼”-17¾”-17¾”.

RIGHT SLEEVE:
Cast on 65-65-72-72-72-79 sts on needle size 2.5 mm / US 1 with Alpaca. Work rib as follows (first row = from RS): 1 edge st, * K3, P4 *, repeat from *-* on 21-21-21-21-21-28 sts, K3, M.2 (= 18 sts), * K3, P4 *, repeat from *-* on the next 21-21-28-28-28-28 sts and 1 edge st. Continue like this up to Arrow-C in M.2. There are now 73-73-80-80-80-87 sts on needle. Change to needle size 3 mm / US 2or3 and continue as follows (from RS): 1 edge st, 24-24-24-24-24-31 stockinette sts, M.2 (= 26 sts), 21-21-28-28-28-28 stockinette sts and 1 edge st. Work 1 vertical repeat of M.2 like this = 65-65-72-72-72-79 sts on needle. Insert a marker, and now measure piece from here. Continue as described for Left Sleeve.

LONG SLEEVES:
Worked back and forth on needle.
LEFT SLEEVE:
Cast on 58-58-65-65-65-72 sts on needle size 2.5 mm / US 1 with Alpaca. Work rib as follows (first row = RS): 1 edge st, * P4, K3 *, repeat from *-* on 21-21-21-21-21-28 sts, M.2 (= 18 sts), K3, * P4, K3 *, repeat from *-* on the next 14-14-21-21-21-21 sts and 1 edge st. Continue like this up to Arrow-C in M.2. There are now 66-66-73-73-73-80 sts on needle. Change to needle size 3 mm / US 2or3 and continue as follows (from RS): 1 edge st, 21-21-21-21-21-28 stockinette sts, M.2 (= 26 sts), 17-17-24-24-24-24 stockinette sts and 1 edge st. Work 1 vertical repeat of M.2 like this = 58-58-65-65-65-72 sts on needle. Insert a marker, and now measure piece from here. Continue in stockinette st with 1 edge st each side. AT THE SAME TIME when piece measures approx 1-2-2-1-1-1 cm / 3/8”-3/4”-3/4”-3/8”-3/8”-3/8” from marker inc 1 st each side, repeat the inc on every 2.5-1.5-1.5-1.5-1-1 cm / 7/8”-½”-½”-½”-3/8”-3/8” a total of 12-15-15-18-21-21 times = 82-88-95-101-107-114 sts. When piece measures 31-31-30-30-28-27 cm / 12¼”-12¼”-11¾”-11¾”-11”-10 5/8” from marker (less for the larger sizes because of longer sleeve cap and wider shoulder) bind off for 4 sts each side for sleeve cap and bind off for sleeve cap at the beg of every row: 2 sts 4-5-5-5-4-4 times each side and 1 st 3-3-5-5-11-14 times each side, then bind off 2 sts each side until piece measures 38-39-39-40-40-41 cm / 15”-15¼”-15¼”-15¾”-15¾”-16 1/8”, now bind off 4 sts each side 1 time, and bind off remaining sts. Piece measures a total of approx 57-58-58-59-59-60 cm / 22½”-22¾”-22¾”-23¼”-23¼”-23 5/8”.

RIGHT SLEEVE:
Cast on 58-58-65-65-65-72 sts on needle size 2.5 mm / US 1 with Alpaca. Work rib as follows (first row = RS): 1 edge st, * K3, P4 *, repeat from *-* on 14-14-21-21-21-21 sts, K3, M.2 (= 18 sts), * K3, P4 *, repeat from *-* on the next 21-21-21-21-21-28 sts and 1 edge st. Continue like this up to Arrow-C in M.2. There are now 66-66-73-73-73-80 sts on needle. Change to needle size 3 mm / US 2or3 and continue as follows (from RS): 1 edge st, 17-17-24-24-24-24 stockinette sts, M.2 (= 26 sts), 21-21-21-21-21-28 stockinette sts and 1 edge st. Work 1 vertical repeat of M.2 like this = 58-58-65-65-65-72 sts on needle. Insert a marker, and now measure piece from here. Continue as described for Left Sleeve.

ASSEMBLY:
Sew shoulder seams. Set in sleeves. Sew sleeve and side seams inside 1 edge st. Sew rib on neck tog mid back and sew to back piece.

Diagram

All measurements in charts are in cm.

= K from RS, P from WS
= P from RS, K from WS
= 1 YO between 2 sts, on next row work YO into back of loop to avoid a hole.
= slip 1 st on cable needle behind piece, K3, P1 from cable needle.
= slip 3 sts on cable needle in front of piece, P1, K3 from cable needle.
= slip 3 sts on cable needle in front of piece, K3, K3 from cable needle.
= slip 3 sts on cable needle behind piece, K3, K3 from cable needle.
= slip 3 sts on cable needle behind piece, work first st on needle tog with first st on cable needle a total of 3 times.
= P2 tog
= slip 3 sts on cable needle in front of piece, work first st on cable needle tog with first st on needle a total of 3 times.
= K2 tog


Comments (106)

Leave your comment!

GILBERT DUHAMEL 05.12.2018 - 13:50:

Bonjour,\r\nJe suis en train de tricoter le pull modéle 114-8,j\'ai fait le dos sans problème a présent je suis sur le devant a 34 cm de haut je commence le dessin au 3éme rang je fait les 2 jetés sur l\'endroit sur le rang envers j\'ai tricoter les jetés en mailles torses pour évité le trou ,par contre le rang suivant j\'ai 2 mailles en plus sur le shéma il y a 6 m. a l\'endroit mais moi j\'en ai 8. Pouvez-vous m\' aider ,je vous remercie d\'avance

DROPS Design 05.12.2018 kl. 15:22:

Bonjour Mr Duhamel, le 1er rang de M.1 se tricote sur l'endroit, donc le 3ème rang sera également sur l'endroit et vous augmenterez ainsi: 12 m end, 1 m env, 1 jeté, 4 m end, 1 jeté, 1 m env, 12 m end. Au rang suivant (= Rang 4), tricotez M.1 ainsi: 12 m env, 1 m end, 6 m end (tricotez les 2 jetés torse pour éviter les trous), 1 m end, 12 m env. Au 5ème rang, on va tricoter 11 m end, les 2 torsades sur 8 m, 1 m env, 11 m end. Lisez bien le diagramme de droite à gauche sur l'endroit et de gauche à droite sur l'envers. Bon tricot!

Evelyn Pinkham 08.11.2018 - 14:48:

So that I can knit this pattern, I tried to print it. But the entire pattern will not print (the edge is cut off, bottom of the page is overprinted by the cookies notice, etc.) . Can you please send it to me in a printable format (in American English), including the errata. I will be making the largest size.

DROPS Design 08.11.2018 kl. 15:45:

Dear Mrs Pinkham, clean your cache and try again - make sure to print all pages - try if necessary with A.4 format - It should work. Happy knitting!

Debora 12.07.2018 - 17:12:

Buongiorno ho fatto le diminuzioni alle maniche dagli scalfi in su come spiegato ma sono diverse dalle diminuzioni per lo scalfo fatte sul corpo , quindi non riesco a far combaciare i bordi per le cuciture . Dove sbaglio? Grazie mille

DROPS Design 13.07.2018 kl. 08:42:

Buongiorno Debora. Provi a vedere se il video che alleghiamo può aiutarla nella cucitura. Buon lavoro!

Jackie Marriott 03.07.2018 - 14:06:

Hi I persuaded my Mum to knit this jumper. She is 86 an experienced knitter and has been struggling with the way the pattern is written. I am also an experienced knitter and I too have had difficulty with its interpretation. I can see that others have had problems with how you are describing to decrease particularly the sleeves. If you decrease as it is written you do not have enough stitches to finish the decreasing. We are having to work it out ourselves.

Debora 16.06.2018 - 22:39:

Buonasera vorrei un chiarimento sulle diminuzioni nelle maniche a livello degli scalfi. Vanno fatte ogni ferro quindi anche sui ferri a rovescio? Grazie mille

DROPS Design 17.06.2018 kl. 07:55:

Buongiorno Debora. Sì le diminuzioni vanno fatte all'inizio di ogni ferro, quindi anche sul rovescio. Buon lavoro!

Claudia Wächtler 26.02.2018 - 13:10:

Vielen Dank für die Hilfe.Hat mir sehr weiter geholfen auf in das Strickvergnügen.Danke

Claudia Wächtler 24.02.2018 - 19:27:

Hilfe ich komm nicht weiter.Wie muss ich am V Ausschnitt die Maschen abnehmen?????

DROPS Design 26.02.2018 kl. 08:46:

Liebe Frau Wächtler, es wird 1 M bei 2 M rechts zusammen/1 M abheben, 1 M stricken, die abgehobene M über die gestrickte M ziehen (wie Sie am meisten möchten). Viel Spaß beim stricken!

Claudia Wächtler 24.02.2018 - 08:42:

Hallo Können Sie mir genau sagen wann die 4 x1 Masche abgenommen wird damit ich 38 Maschen habe. Danke

DROPS Design 26.02.2018 kl. 07:55:

Liebe Frau Wächtler, die 4x 1 M werden in jeder 4. Reihe vor den 15 M Bündchen (beim linken Vorderteil) und nach den 15 M Bündchen (beim rechten Vorderteil) abgenommen. Viel Spaß beim stricken!

Claudia Wächtler 14.02.2018 - 22:55:

Hallo Ich möchte gerne wissen,ob das Diagramm am V-Ausschnitt ob da alle Reihen oder nur die vorderen Reihen gezeigt werden.Vielen Dank für Eure Hilfe Claudia

DROPS Design 15.02.2018 kl. 09:44:

Liebe Claudia, das Diagram zeigt alle Reihen dh die Hin sowie die Rückreihen. Bei Hinreihen lesen Sie von rechts nach links und bei Rückreihen lesen Sie von links nach rechts. Viel Spaß beim stricken!

Christine 15.01.2018 - 11:43:

Man kann das leider auf dem Bild nicht erkennen, aber müßte die Kreuzung in M2 bei den Reihen 37 und 42 nicht eigentlich in die andere Richtung erfolgen (also Hilfsnadel nach HINTEN) da das Prinzip des Musters ja sicher ist, daß sich die Stränge abwechselnd oben und unten kreuzen, als quasi verwoben werden (sorry, schwer zu erklären, aber ich hoffe, es macht Sinn...). Ich habe das jedenfalls jetzt so gemacht und es sieht logisch aus...

Christine 15.01.2018 kl. 12:29:

Oops, sorry - ich habe es nochmal genau studiert und es macht doch Sinn, so wie es aufgeschrieben ist... guuuut... ein paar Reihen aufribbeln...

Post a comment to pattern DROPS 114-8

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.