DROPS Alpaca Party - 13 alpaca yarns on sale all October!

Sew together a knitted piece

Learn how to sew together your knitted project using a sewing needle and different stitches.

Categories
Videos: 43
6:19
How to sew a sleeve cap with split to an armhole

In this DROPS video, we show you how to sew a sleeve cap with a split to an armhole, so that it matches the measurements chart. The yarn featured in this video is DROPS Air. This technique can be used in several patterns – which you can find by clicking on the pictures below:
3:00
How to sew a shoulder seam

In this DROPS video, you’ll learn how to sew a shoulder seam. To make the process clear and easy to follow, we use a contrasting color for the seam. Simply sew along the cast-off edges for the best results. We use the yarn DROPS Air in the video. This technique can be used in several patterns – which you can find by clicking on the pictures below:
5:15
How to close the seam under raglan sleeve (Kitchener sts, grafting, weaving)

In this DROPS video we show two ways of sewing together the hole under sleeves on a jumper/jacket with raglan. First, we show how to sew together so we get an invisible seam. Remember not to tighten the thread and sew from RS. Stitches should be same size as the knitted stitches. At thicker yarn it avoids that it becomes a thick seam on the back. Then we show how to sew together by sewing together the seam in the inner loops of edge sts. You get a thicker stitching on the outside, but it will not show up when it comes under arm. You must read the pattern to be able to follow. You’ll find patterns by clicking on the picture below.
3:57
How to sew an invisible side seam

In this DROPS video we show how you can sew an invisible side seam on a knitted garment. Sew from RS inside 1 edge st each side. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:42
How to sew invisible grafting stitches

In this DROPS video we show how you can sew invisible grafting stitches on a knitted garment. This is a perfect technique for e.g. a shoulder seam. Sew from RS. Stitches should be same size as the knitted stitches. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
3:08
How to sew mattress stitches

In this DROPS video we show how to sew mattress stitches. This is a common way of seaming together side-to-side pieces - like side seams on sweaters. In the video we use a contrasting color yarn so it's easy to see what we are doing. If the tail from casting on is long enough use it to seam. Mattress stitching is done in the space between the edge stitch and the stitch next to it. Lay the pieces side by side with the right side facing you. Pull the edge stitch slightly away from the stitch next to it so that you can see the bar between the edge st and the next st. Insert your yarn needle under the bar. Pull the yarn through the bar and then insert the needle under the bar on the other piece. Work back and forth, inserting the needle under the bar on one piece then the other piece. As you go along you can pull the yarn in the direction of the seam and the pieces will be joined with an invisible seam. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:57
How to sew invisible grafting / kitchener stitch in the cast off edge from wrong side

In this DROPS video we show how to sew an invisible seam in the cast off edge from wrong side (same technique can also be used when sewing cast on and cast off edge together). Put the pieces with the wrong side together, edge to edge. Fasten the thread by sewing the two corners together twice. Put the needle in the outermost loop of the outermost stitch on the first piece (down and up), then sew in the outermost loop of the outermost stitch on the second piece (down and up), continue sewing every other part, down and up. We use the yarn DROPS Snow in the video.
6:06
How to sew invisible grafting / kitchener stitch, both from right and wrong side

In this DROPS video we show how we sew invisible grafting / kitchener stitch, both from the right side and the wrong side. We use the yarn DROPS Snow in the video. Read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on one off the picture below.
7:40
How to knit Kitchener stitch

In this DROPS video we show how to knit Kitchener stitch. This means knitting two parts together with an invisible seam. This is a perfect technique for the top of the toes on a sock, shoulders etc. Have your sts on each needle with right sides out. Working yarn attached in the back piece. Following 4 steps are being repeated: 1. go purl-wise into first st on front needle, pull yarn through, lift st off needle. 2. go knit-wise into next st on front needle, pull yarn through (leave st on needle). 3. go knit wise into first st on back needle, pull yarn through, lift st off needle. 4. go purl-wise into next st on back needle, pull yarn through (leave st on needle). You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
6:13
How to do Kitchener stitches / grafting / weaving

In this DROPS video we show how to sew two parts together with an invisible seam, also known as Kitchener stitch (aka grafting, aka weaving). This technique is perfect for the top of the toes on a sock, shoulders etc. Have your sts on each needle with right sides out. Working yarn attached in the back piece. Start: pull needle and yarn through st on front needle purl-wise, then pull needle with yarn through first st on back needle knit-wise. Tighten thread - you are ready to go. Following 4 steps are being repeated: 1. go knit-wise into first st on front needle, lift st off needle 2. go purl-wise into next st on front needle, pull yarn through (leave st on needle) 3. go purl wise into first st on back needle, lift st off needle 4. go knit-wise into next st on back needle, pull yarn through (leave st on needle) Think "knit, purl. purl, knit", always starting on the front needle. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:43
How to sew garter stitch pieces together

In this DROPS video we show how to sew garter stitch pieces together to make an invisible seam. Sew 1 stitch through the bump, and then one stitch between bumps, sew back and forth from the right side of work. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
4:41
How to sew together cast off edge in garter stitches

In this DROPS video we show 2 ways to sew together a piece worked in garter stitches. Fold the piece, RS against RS and sew the cast off edge together in the outermost loop so the seam is flat. 1. Insert the needle in the outermost loop of first stitch towards you then into the outermost loop of first stitch away from you then into the outermost loop of the next stitch away from you and into the outermost loop of next stitch towards you and repeat this. We also show result of this technique looks like with a darker colour. 2. Insert the needle into the outermost stitch of first stitch towards you, then into the outermost loop of first stitch away from you, and repeat this. We also show result of this technique looks with a darker colour. We use the yarn DROPS Snow in the video. You must read a pattern to be able to follow this video properly. You’ll find a pattern by clicking on one of the pictures below.
2:05
How to sew together 2 pieces with an I-cord cast off

I-cord = Knitted tube. In this DROPS video we show how to sew 2 pieces with an I-cord cast off together inside outermost stitches in each piece. We use the yarn DROPS Snow in the video. This technique can be used in several patterns – you can find patterns by clicking on the pictures below:
8:14
How to set a sleeve in a stocking stitch jumper

In this DROPS video we show a way to sew a sleeve in a jumper made in stocking st. This jumper has no edge sts and we sew the pieces together from RS by sewing the last sts on the sleeve to the sts at the body. You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.
10:30
How to sew back/front piece together with sleeve in raglan seam.

In this DROPS video we show you how to sew back/front piece together with sleeve in raglan seam. We have already sewn one sleeve to the front and back piece and underarm and side seams. Before we sew the last sleeve, we show on a swatch what we mean to sew inside 1 edge stitch (see pink thread). We use DROPS Snow in the video. You must also read a pattern with this technique as well as watch the video. You can find a pattern by clicking on one of the pictures below.
4:57
How to set a sleeve to a yoke / body

In this DROPS video we show how it is thought that a sleeve will be sewn to a yoke/body so that it matches a measurement chart. Follow the pattern, whether it is knitted from above or from below. Cast on or cast off stitches for armholes, read the pattern / see measurement chart. Work the sleeve around to the stated measurements, then work back and forth to finished measurements. When the sleeve and body are sewn together make sure that the marks on sleeves fit bottom of armhole. We use the yarn DROPS Nepal in the video. You must read the pattern and look at the measurement chart to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
3:44
How to assembly a sleeve to a front piece

In this DROPS video we show how to assembly a sleeve to a front piece with garter stitch edge. Lay the sleeves under the garter stitch edge along the armholes and sew neatly from the right side (there should not be a loose edge after sewing; sew in the outermost garter stitch from the right side so the edge lies neatly outside the sleeve). We use the yarn DROPS Snow in the video. You must read the pattern to be able to follow this video properly. You’ll find patterns with this technique by clicking on one of the picture below.
5:38
How to sew a sleeve cap to an armhole

In this DROPS video we show how it is thought that a sleeve cap will be sewn to an armhole so that it matches a measurement chart. How to sew the sleeve seams and side seams you can take a look at the video: How to sew an invisible side seam We use the yarn DROPS Snow in the video. You must read a pattern and look at the chart to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
4:06
How to sew bands together and how to sew them to the neckline

In this DROPS video, we show how we sew 2 bands together and then sew them to the neckline behind the neck. Sew the bands together with small stitches edge to edge so that there will not be a thick seam. Then sew the band to the back piece with small stitches in the band and invisible grafting/kitchener stitch on the back piece. We use the yarn DROPS Daisy and DROPS Kid-Silk in the video. The technique can be used in several DROPS patterns - you can find patterns by clicking on the pictures below:
2:17
How assembly a double neck edge on the inside of a garment

In this DROPS video we show how to sew a rib / neck edge on the inside of a garment. Work the rib / neck edge as it is written in a pattern and when assembly fold the rib at the top of neck down on the inside of garment. Fasten rib but to avoid a tight neck edge and avoiding the edge to tip outwards, it is important to make the seam elastic. We use the yarn DROPS Snow in this video
6:42
How to assembly a knitted slipper under and in the back

In this DROPS video we show how to assembly a knitted slipper. We are showing how to sew cast off edge together edge to edge (sew in the outer stitch for seam not to get thick) under the foot and in the back of slipper. You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.
3:23
How to assembly a felted slipper

In this DROPS video we show how to assembly a felted slipper. We are showing how to fold the slipper and sew tog mid back in outer loops of sts. Sew tog mid upper foot at the front in the same way. You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.
4:50
How to assembly slippers with squares following a chart

In this DROPS video we show how we assemble a slipper with squares following a chart. To see how to sew the square in garter stich together, go to: How to sew pieces in garter stitch together You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.
4:39
How to assemble a slipper

In this DROPS video we show how a slipper looks when it is finished knitted, where it is to be sewn and where to pick up stitches / knit 2 rows to the opening to the foot. The picture of the slippers in the video are knitted in DROPS Big Delight, but in video we work with a thicker yarn; DROPS Snow. We use a different stitch number than the pattern, but the shape is roughly the same, so you have to read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.