DROPS Super Sale - 6 popular yarns on sale all month!

Knitted slippers and how to sew up the slippers in Drops 158-47

Video thumbnail for Knitted slippers and how to sew up the slippers in Drops 158-47
In this DROPS video we show how to knit and sew up one of our popular slippers. We have already cast on 37 sts and worked garter stitch until piece measures 1 1/2 inch (4 cm). REMEMBER - very important - you will need to read the pattern to be able to follow. To see the pattern to these slippers, go to: DROPS 158-47

Patterns using this technique

DROPS 158-47

DROPS 158-47
Change language:

Video #574, listed in: Pattern tutorials, Socks and Slippers, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Chris wrote:

With 39 sts at beginning to do garter st how many needles are you using please. Is it circle or straight

12.07.2018 - 04:07

DROPS Design :

Dear Chris, leg is worked in the round starting with 39 sts in the round, distribute the sts onto 4 needles with for example 10 sts on 3 needles and 9 sts on one needle) and join in the round for approx. 4 cm. Happy knitting!

12.07.2018 - 09:44

Country flag Therese wrote:

Pour le pied je ne comprend pas continuer en aller retour et pour garder les dix premières mailles

31.12.2017 - 22:32

DROPS Design :

Bonjour Thérèse, le pied se tricote sur les 10 premières mailles du tour, glissez les autres mailles en attente et continuez en allers et retours sur ces 10 mailles (+ 2 m lis à monter au 1er rang) jusqu'à la hauteur indiquée pour votre taille. Bon tricot!

02.01.2018 - 11:47

Country flag Denise St Pierre wrote:

Comment monter les mailles a la fin du rang et au début du rang et aussi bien de la difficulter a vous suivre sur la vidéo sa va trop vite suis rendu a faire le pied au début et la fin des rangs ecq je fait 1 m' lisière end, a chaque rang après avoir monter les mailles lisières

28.06.2017 - 00:03

DROPS Design :

Bonjour Mme St Pierre, quand vous tricotez les 10 m du dessus du pied, vous pouvez augmenter 1 m de chaque côté en tricotant 2 fois la 1ère et la dernière m. Tricote ensuite avec 1 m lis au point mousse de chaque côté et diminuez les m lis de chaque côté (= 2 m ens à l'end) à la hauteur indiquée. N'hésitez pas à cliquer sur le bouton "pause" de la vidéo pour bien décomposer les mouvements si besoin. Bon tricot!

28.06.2017 - 08:30

Country flag Nancy Claro wrote:

There is no sound to this video in either English or Portuguese. HELP!!!

13.10.2016 - 15:11

DROPS Design :

Dear Mrs Claro, Our videos do not have sound. We are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English nor portuguese. We have therefore written instructions to accompany this video, and there is no sound to disturb while watching. Enjoy!

13.10.2016 - 16:22

Country flag Marie wrote:

Je ne réussis pas à relever les mailles. Comment faire? merci de me répondre en Français.

29.11.2015 - 19:34

DROPS Design :

Bonjour Marie, cette vidéo montre comment relever les mailles de chaque côté du pied, sans tricoter ces mailles (elles sont ainsi sur l'aiguille, prêtes à être tricotées). Bon tricot!

30.11.2015 - 11:31

TANYA wrote:

I am not sure why I have no sound on the video?

14.08.2015 - 10:11

DROPS Design :

Dear Tany, Our videos do not have sound. We are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English. We have therefore written instructions to accompany this video - follow here pattern, and there is no sound to disturb while watching. Happy knitting!

14.08.2015 - 14:23

Country flag Beverly Gasaway wrote:

I've watched the video over and over and read the directions. I finished the 1st part of the slipper now I am trying to figure out how to work 4 ridges at the same time??? I do not understand the directions for the top part of the slipper.

09.12.2014 - 19:34

DROPS Design :

Dear Mrs Gasaway, when working the loose leg across, you work 4 ridges (= 8 rows K), when working the 8th row, inc 6 sts evenly = 28 sts - at the end of loose leg, work again 4 ridges, and on 1st K row, dec 6 sts evenly = 22 sts. Happy knitting!

10.12.2014 - 10:10

Country flag Dianna wrote:

Thank you! Once I realized you used five double pointed needles instead of only four, it was much easier. Haha

21.10.2014 - 14:59

Country flag Dianna wrote:

I have watched the video and am not sure yet how to pick up stitches along middle of foot. Do I have 65 stitches all on one needle? Where do I put stitches from such holder? In really frustrated that I can not figure this out.

19.10.2014 - 14:00

DROPS Design :

Dear Dianna, when you get 10 sts on middle of foot, pick up from RS 14 sts along the left side of middle foot, knit the sts from thread/st holder and pick up 14 sts along the right side of middle foot = 65 sts. Happy knitting!

20.10.2014 - 11:13

Country flag Esther Spence-Crabb wrote:

There is no sound for this video..

16.10.2014 - 02:57

DROPS Design :

Dear Mrs Spence-Crabb, you are correct, there is no sound to our videos, we are a worldwide company and our videos are watched by people around the world, speaking different languages, many of whom do not understand English. To follow the video, you will need to read the pattern. Happy knitting!

16.10.2014 - 09:56

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to start a sock with a flounce
3:51
How to start a sock with a flounce

In this DROPS video we show how to start a sock with a flounce, like the “Dainty Duo” socks in DROPS 229-19. We cast on with 2 strands, but continue with 1 strand. Then we knit 4 rounds and on the next round we knit all stitches together 2 by 2. Then we work a rib (knit 1 twisted/purl 1). These socks are worked in DROPS Fabel, but in the video, we work with a thicker yarn; DROPS Snow. You must read a pattern with this technique to be able to follow this video properly. You’ll find a pattern by clicking on the picture below.
Video thumbnail for How to work after charts to the socks in DROPS 229-20
11:52
How to work after charts to the socks in DROPS 229-20

In this DROPS video we show how we work after chart A.1 (flounces) and A.2 (lace pattern) to the “Kissing Kate” socks in DROPS 229-20. We show the beginning and end after chart A.1, and in chart A.2 we show round 3, 4, 9 and 10. We use less stitches than it says in the pattern. These socks are worked in DROPS Nord but in the video, we work with a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work the slippers in DROPS 203-37
20:51
How to work the slippers in DROPS 203-37

In this DROPS video we show how to work the “Carrot Squash” slippers in DROPS 203-37. We have already cast on stitches for size 35/37 = US 4.5/6.5 and start the video by showing round 1 (only Knit). Then the rib, K1, P1. After the rib put 31 stitches on a stitch holder, work the other stitches back and forth. Then work these stitches, the new pickup stitches along the sides and the stitches from the stitch holder, and work around again. Decrease stitches and work around to finish measurement, bind off and fold the slipper and sew under foot in the outermost loop of the outermost stitch. These slippers are worked in DROPS Snow, the same yarn we use in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.