DROPS Children 49 · Lots of new kid designs!

How to bind off with picot

In this DROPS video we show to increase and at the same time bind off to a picot. We have already worked a rib ((knit 1 twisted/purl 1) and start the video with binding off like this: Knit 1 twisted, * insert right needle between the first 2 stitches on left needle, make 1 yarn over on right needle, pull yarn over forward between the stitches and slip yarn over on to left needle *, work from *-* 2 times in total, knit and bind off at the same time off 5 stitches (= 1st stitch on right needle + 2 yarn overs+ 2 stitches). Continue to work from *-* and bind off 5 stitches the same way along the entire bind-off edge until there are no stitches left to make a new picot. Bind off the remaining stitches. We use the yarn DROPS Snow in the video. You must read a pattern with this bind off technique to be able to follow this video properly. You’ll find a pattern by clicking on the pictures below.

Patterns using this technique

DROPS 231-21

DROPS 231-21
DROPS 231-22

DROPS 231-22
Change language:

Video #1714, listed in: Learn to knit, Bind off, Picot

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Jytte wrote:

Hjælp mig

04.08.2022 - 18:28

Country flag Jytte wrote:

Jeg er ved at strikke baby Harriet, Baby 18-9 jeg er så ked af det, for kjolen kryber op, den nederste kant kravler hele tiden op. Hvad skal jeg gøre, kan jo ikke sætte et metalbånd i forneden? Venlig hilsen Jytte Hansen

04.08.2022 - 18:28

DROPS Design :

Hei Jytte. Prøv å dampe kanten lett og se om den holder seg "nede". mvh DROPS Design

08.08.2022 - 13:59

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to bind off with a picot edge on a rib
5:09
How to bind off with a picot edge on a rib

In this DROPS video we show how to bind off with a picot on a rib. Knit 1, * insert right needle between the next 2 stitches (not through the stitches), make 1 yarn over, pull the yarn over between the stitches and place on left needle *, work from *-* 2 more times (= 3 yarn overs on left needle), knit and cast off 7 stitches (= 1 stitch + 3 yarn overs + 3 stitches). Work from *-* and bind off 7 stitches in the same way along the whole edge. When there are not enough stitches to work another picot, bind off the remaining stitches as usual. We use the yarn DROPS Snow in the video. You’ll find patterns using this technique by clicking on the pictures below.
Video thumbnail for Bind-off edge with picot
4:06
Bind-off edge with picot

In this DROPS video we show you have to cast off with a picot edge. In the video we work like this: K 1, (* insert right needle in between the first 2 sts on left needle (i.e. between sts on needle, not through sts), make 1 YO on right needle, pull YO forwards between sts and slip YO on left needle *, repeat from *-* 2 more times (= 3 new sts on left needle). ** K first st on left needle, pass first st on right needle over last st worked **), repeat from **-** 5 times in total and repeat from (-) along the entire row until 1 st remains. Cut the yarn and pull it through last st. To see a pattern with a picot edge, go to: DROPS 168-14 To see a pattern with a similar picot edge, go to: DROPS 169-8

Video thumbnail for How to work with 2 circular needles with different needle sizes
9:10
How to work with 2 circular needles with different needle sizes

In this DROPS video we show you how to work rib in a stockinette stitch piece. To allow the rib to tighten, work the rib with a smaller needle size than the rest of the piece. Use both ends of the needle when working.
Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for European yoke-Short overview. The neck is finished after the stitches for the sleeves are picked up
4:54
European yoke-Short overview. The neck is finished after the stitches for the sleeves are picked up

In this DROPS video we show a brief overview of how to knit a garment with an European yoke, where the neck is finished after the stitches for the sleeves are picked up. The garment is worked as follows, according to these 5 steps: 1) BACK PIECE: Cast on stitches for the back of the neckline and work the back piece top down, at the same time as increasing each side until you have reached the correct shoulder-width. The back piece has slightly diagonal shoulders. 2) FRONT PIECE: The front piece is worked in 2 pieces (each side of the neck). Start by knitting up stitches along one shoulder on the back piece. Work the front piece top down, at the same time as increasing for the neckline. Repeat for the second front piece along the other back shoulder. 3) YOKE: On the next row, place all stitches on the same circular needle as follows: Work across one front piece, pick up stitches for the sleeve along the side of the front piece, work across the back piece, pick up stitches for the sleeve along the side of the second front piece, work across the second front piece. The yoke is continued back and forth across all stitches, with the rows starting and ending mid-front. 4) INCREASE FOR NECK, BODY AND SLEEVES: While working the yoke, begin by increasing only for the neckline and sleeves, then subsequently for both the body and sleeves. Once the final increase for the neckline is done, the 2 front pieces are joined mid-front and the piece is continued in the round. 5) BODY AND SLEEVES: When all the increases are finished and the yoke has been worked to the correct length, it is divided for the body and sleeves. The body is continued in the round with a circular needle, top down, while the sleeves wait.