DROPS Children 49 · Lots of new kid designs!

How to knit cables and false fisherman's rib

In this DROPS video we show you how to knit the cables and false fisherman's rib after chart A.1, A3 and A.4 in the jumper in DROPS 181-18. We have already knitted 1 ridge, chart A.2 and 2 rows of chart A.4. In the video we knit like this: 3 stitches garter stitch, A.1 over 4 stitches, A.4 over 31 stitches, A.3 over 4 stitches and 3 stitches in garter stitch. We knit size S-M-L. This jumper is knitted in DROPS Snow, we use the same yarn in the video. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.

Patterns using this technique

DROPS 181-18

DROPS 181-18
Change language:

Video #1177, listed in: Pattern tutorials, Women, Knitting patterns, Jackets & Jumpers

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Denise Fontaine wrote:

Grandeur L - Après les 2 rangs point mousse, au prochain rang on demande de tricoter 3 mailles point mousse, A.1, au-dessus des 32 mailles suivantes. le diagramme est fait ainsi : il y a 4 rang un au-dessus de l'autre dans ce diagramme. Fait-on les 4 lignes l'une à la suite de l'autre, répétées 2 fois = 32 mailles ou la première ligne répétée 8 fois, pour un total de 32 mailles ? Merci pour votre réponse

24.10.2017 - 22:17

DROPS Design :

Bonjour Mme Fontaine, les diagrammes se lisent rang après rang, de droite à gauche sur l'endroit et de gauche à droite sur l'envers, ainsi, en taille L, vous répétez 8 fois au total les 4 m de A.1 = sur 32 mailles, rang après rang. Tricotez comme dans la vidéo: rang 1 de A.1, A.2, A.3, puis rang 2 de chacun des diagrammes et ainsi de suite. Bon tricot!

25.10.2017 - 09:03

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to knit up stitches around an armhole, for a sleeve with split
10:08
How to knit up stitches around an armhole, for a sleeve with split

In this DROPS video, we demonstrate how to knit up stitches around an armhole for a split-sleeve. We begin by showing you how to use a crochet hook to knit up stitches and transfer them onto a knitting needle. Then, we continue by showing you how to work with the stitches using knitting needles. Start at the bottom of the armhole (not directly under the sleeve) and knit up the number of stitches specified in your pattern, going as far as the other side of the armhole. Knit up the stitches within one stitch, which is often a garter stitch. Turn and work back, continuing back and forth to the measurement specified in your pattern, or use short rows for a better fit. Once completed, the sleeve is joined and worked in the round. Refer to your pattern for details on measurements, decreases, and the ribbed cuff. In this video, we demonstrate only 6–7 = 2⅜"-2¾" cm of the sleeve. Finally, sew together the hole under the sleeve. To make the seam and sewing easier to see, we use a contrasting color in the video. The yarn featured in this video is DROPS Air. This technique can be used in several patterns – which you can find by clicking on the pictures below:
Video thumbnail for How to work the jacket in DROPS 248-5 – Part 4
8:39
How to work the jacket in DROPS 248-5 – Part 4

In this DROPS video we show a bit of how the sleeve to the Sand Diamond Cardigan is worked. We also show how to sew the front band stitches to along the neckline. We use the stitch numbers for size M. Read in the pattern how many stitches to knit up under the sleeve, where and how often to decreases, change needle size and the length of the rib. Sew in the buttons. Sew the bands together mid-back, then sew the bands to the neckline, stretching the bands a little to sew it on. This jacket is worked in DROPS Daisy, but in the video, we use DROPS Cotton Merino color no. 30. You’ll find the pattern by clicking on the picture below. You will also find several tutorials videos for this jacket, see below.
Video thumbnail for How to work the jacket in DROPS 248-5 – Part 3
12:49
How to work the jacket in DROPS 248-5 – Part 3

In this DROPS video we show a bit of how the Sand Diamond Cardigan is worked. We use the stitch numbers for size M. We have already worked the bands with an I-cord edge, some of chart A.1, A.2, A.3 and A.4 (see video Part 1) and worked YOKE until the part divide for body and sleeves. (see video Part 2). We start the video by working the row where we divide the bodies and sleeves (from right side). Read under DIVIDE FOR BODY AND SLEEVES – ALL SIZES in the pattern. In size M there should then be 235 stitches for the body and 56 stitches for each sleeve. Then it is working from wrong side and work 2nd row in the charts as follows: Work 7 band stitches as before, A.6, A.3 until there are 12 stitches left, A.5 and 7 band stitches as before. * Work 7 band stitches as before, A.5, A.3 until there are 13 stitches left, A.6 and 7 band stitches as before. Work the diagrams 1 time in height. Continue with 7 band stitches as before, A.7, A.3 until there are 18 stitches left, A.8 and 7 band stitches as before. Work the diagrams 1 time in height *. Work from *-* until the body have the specified length (18 cm in size M), finishing after a complete repeat of A.3 in height. Remember the buttonholes. Then change the needle, work a rib, increase stitches and work the 7 band stitches on each side are worked as before, read more in the pattern. This jacket is worked in DROPS Daisy, but in the video, we use DROPS Cotton Merino color no. 30. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below. You will also find several tutorials videos for this jacket, see below.
Video thumbnail for How to work the jacket in DROPS 248-5 – Part 2
13:30
How to work the jacket in DROPS 248-5 – Part 2

In this DROPS video we show a bit of how the Sand Diamond Cardigan is worked. We use the stitch numbers for size M. We have already worked the bands with an I-cord edge, worked 24 rows of chart A.1 and worked charts A.2, A.3 and A.4 two times in height (see video Part 1). When A.2, A.3 and A.4 have been worked two time in height, you will work 2 more repeat of A.3 between A.2 and A.4 (= 4 reports of A.3). When A.1 has been worked 1 time in height, the increases towards mid-front are finished, and except size S, continue increasing for raglan in each transition between body and sleeves. Read under the PATTERN and under the size you knit how to work the next row (we use stitch markers between the charts to get a better overview). Remember BUTTONHOLES. When A.2, A.3 and A.4 have been worked 1 more time in height, all the increases are finished and there are now 317 stitches on the needle and the work measures approx. 27 cm = 10⅝" from the shoulder (size M). This jacket is worked in DROPS Daisy, but in the video, we use DROPS Cotton Merino color no. 30. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below. You will also find several tutorials videos for this jacket, see below.
Video thumbnail for How to work the jacket in DROPS 248-5 – Part 1
14:08
How to work the jacket in DROPS 248-5 – Part 1

In this DROPS video we show a bit of how the Sand Diamond Cardigan is worked. We use the stitch numbers for size M. We have already worked the bands with decreases and I-cord edge, and start the video by cast on stitches between the right and left band (the green markers show the decreases worked on each band piece). Then we purl 1 row from the wrong side, while the 7 band stitches on each side are worked as before. On the next row, work garter stitches, stockinette stitches, after charts and increases to raglan, read under YOKE in the pattern, the 7 band stitches on each side are worked as before (we use stitch markers between the charts to get a better overview). When A.2, A.3 and A.4 have been worked 1 time in height, you will work 1 more repeat of A.3 between A.2 and A.4 (= 3 repeats of A.3). This jacket is worked in DROPS Daisy, but in the video, we use DROPS Cotton Merino color no. 30. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below. You will also find several tutorials videos for this jacket, see below.
Video thumbnail for How to work cables after chart and a flounces edge
13:47
How to work cables after chart and a flounces edge

In this DROPS video we show how to work simple cables after chart and how we finish with a flounces edge. You can find this cables and flounces edge in the sweater “Pearlescent Top” in DROPS 230-25. We have already worked chart A.2 3 times in height and show in the video how to work it 1 time in height. We show the beginning and end in each round. Then we show how to work after chart A.3, how to increase to the flounces edge. This sweater is worked in DROPS Alpaca and DROPS Kid-Silk, but in the video, we work with DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.