Charming Catch by DROPS Design

Crocheted sweater with raglan in DROPS Cotton Merino. Piece is crocheted top down with lace pattern and short sleeves. Size: S - XXXL

Keywords: lace, raglan, sweaters, top down, tops,
  • Charming Catch / DROPS 211-7 - Crocheted sweater with raglan in DROPS Cotton Merino. Piece is crocheted top down with lace pattern and short sleeves. Size: S - XXXL
  • Charming Catch / DROPS 211-7 - Crocheted sweater with raglan in DROPS Cotton Merino. Piece is crocheted top down with lace pattern and short sleeves. Size: S - XXXL
DROPS design: Pattern cm-126
Yarn group B
----------------------------------------------------------

SIZE:
S - M - L - XL – XXL - XXXL

Finished measurements:
Chest measurements: 90-100-110-116-126-140 cm = 35 1/2”-39 3/8”-43 3/8”-45 3/4”-49 1/2”-55”
Full length: 54-56-58-60-62-64 cm = 21 1/4"-22"-22 3/4"-23 5/8"-24 3/8"-25 1/4"

All measurements in charts are in cm.

MATERIALS:
DROPS COTTON MERINO from Garnstudio (belongs to yarn group B)
300-350-350-400-450-450 g color 01, off white

CROCHET GAUGE:
16 double crochets in width and 8 rows vertically = 10 x 10 cm = 4” x 4”.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 4.5 mm = US 7.
Hook size is only a suggestion! If you have too many stitches on 10 cm = 4” switch to larger hook. If you have too few stitches on 10 cm = 4” switch to smaller hook.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


50% Wool, 50% Cotton
from 4.30 $ /50g
DROPS Cotton Merino uni colour DROPS Cotton Merino uni colour 4.30 $ /50g
Purple Sheep Yarns
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.80$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

CHAIN STITCH:
If you work at the end of crochet hook the chain stitch will often be too tight
1 chain stitch should be just as long as 1 single/double crochet is wide.

PATTERN:
See diagrams A.1 to A.6.

CROCHET INFORMATION:
At beginning of every round with double crochets work 3 chain stitches, these chain stitches do not replace first double crochet on round. Finish round with 1 slip stitch in 3rd chain stitch at beginning of round.

DECREASE TIP (evenly):
To calculate how to decrease evenly, use the total number of stitches on round (e.g. 88 stitches), and divide stitches by number of decreases to be done (e.g. 11) = 8.
In this example decrease by working every 7th and 8th stitch into 1 stitch as follows:

Insert hook in next stitch, get yarn *, work from *-* 2 times in total, make 1 yarn over and pull yarn through all 3 loops on hook (= 1 stitch decreased).

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

SWEATER - SHORT OVERVIEW OF THE PIECE:
Work in the round top down. First work neck edge and yoke. Then divide the piece into body and sleeves, which are finished separately. Then work a finishing edge around the neck edge while decreasing stitches to make the neck edge tighter.

NECK EDGE:
Work 88-88-88-96-96-104 chain stitches on hook size 4.5 mm = US 7 with Cotton Merino - read CHAIN STITCH, and form a ring with 1 slip stitch in first chain stitch worked. Work 1 double crochet in every chain stitch - read CROCHET INFO!
Now work pattern as follows: Work A.1 22-22-22-24-24-26 times in total on round. Insert a marker in the 4th-4th-4th-5th-5th-5th chain stitch space on round (= on back piece), measure yoke from this marker!

YOKE:
Work pattern in the round as follows: Work A.2a around the first chain space (= increase raglan), A.3 over the next 6-6-6-7-7-8 chain spaces (= back piece), A.4 around next chain space (= increase raglan), A.3 over the next 3 chain spaces (= right sleeve), A.4 around next chain space (= increase raglan), A.3 over the next 6-6-6-7-7-8 chain spaces (= front piece), A.4 around next chain space (= increase raglan), A.3 over the next 3 chain spaces (= left sleeve), finish with A.2b.
Continue in the round like this until the 6 rounds in diagrams have been work vertically. REMEMBER THE CROCHET GAUGE!
Then repeat increase and the last 2 rounds in diagrams the same way 0-1-2-2-3-4 more times (i.e. until 6-8-10-10-12-14 rounds in total have been worked, counted from round with arrow in diagrams) – NOTE: The increase in size S is done when diagrams have been worked 1 time vertically. There are now 42-50-58-60-68-78 chain spaces on round + 1 chain space in every raglan (= 4 chain spaces) = 46-54-62-64-72-82 chain spaces in total.
Now work pattern and increase as follows:
Work A.5a (= increase raglan), A.3 until 1 chain space remains before next increase for raglan, A.6 (= increase raglan), A.3 until 1 chain space remains before next increase for raglan, A.6 (= increase raglan), A.3 until 1 chain space remains before next increase for raglan, A.6 (= increase raglan), A.3 until 1 chain space remains on round and finish with A.5b.
Continue in the round like this until diagrams have been work. There are now 50-58-66-68-76-86 chain spaces on round. Now work pattern as before without increasing for raglan. I.e. repeat the last 2 rounds in A.3 until piece measures approx. 19-21-23-25-27-29 cm = 7 1/2”-8 1/4”-9”-9 3/4”-10 5/8”-11 3/8” from marker – adjust to finish after last round in diagram. Approx. 1 cm = 3/8” remain on yoke until finished measurements.
Now divide piece for body and sleeves as follows: Work 3 chain stitches (= beginning of round), work round with arrow in A.3 over the next 15-17-19-20-22-25 chain spaces (= back piece), skip the next 9-11-13-13-15-17 chain spaces (= sleeve), work 8-8-8-8-8-8 loose chain stitches (= in the side under sleeve), work A.3 over the next 16-18-20-21-23-26 chain spaces (= front piece), skip the next 9-11-13-13-15-17 chain spaces (= sleeve), work 8-8-8-8-8-8 loose chain stitches (= in the side under sleeve), work A.3 around last chain stitch on round, finish round with 1 slip stitch in 3rd chain stitch at the beginning of round. Then finish body and sleeves separately. NOW MEASURE THE PIECE FROM HERE!

BODY:
Now work pattern in the round as follows:
Work 3 chain stitches – remember CROCHET INFO, continue pattern as before (i.e. A.3) in the round, but over the 8 loose chain stitches in the side under sleeve, work 2 repetitions of A.3 = 36-40-44-46-50-56 repetitions of A.3 on round.
Continue in the round like this and repeat the last 2 rounds in A.3 until piece measures approx. 30 cm = 11 3/4” - adjust to finish after a round with 3 double crochet + 1 chain stitch (next to last round in A.3). Entire sweater measures approx. 54-56-58-60-62-64 cm = 21 1/4"-22"-22 3/4"-23 5/8"-24 3/8"-25 1/4" from shoulder and down. Cut and fasten the yarn.

SLEEVES:
Begin from right side and fasten strand with 1 slip stitch in the first of the 8 chain stitches in the side under sleeve. Begin on round with arrow in A.3 and work 2 repetitions around the 8 chain stitches under sleeve, continue in the round with A.3 – remember CROCHET INFO = 11-13-15-15-17-19 chain spaces. Continue in the round like this and repeat the last 2 rounds in A.3 until piece measures 15-13-12-10-9-7 cm = 6”-5 1/8”-4 3/4”-4”-3 1/2”-2 3/4” - adjust to finish after a round with 3 double crochet + 1 chain stitch (next to last round in A.3). Cut and fasten the yarn. Work the other sleeve the same way.

NECK EDGE:
Fasten strand with 1 slip stitch, work 1 chain stitch, then work 1 single crochet in every chain stitch on round while at the same time decreasing 11-8-5-10-6-11 stitches evenly – read DECREASE TIP = 77-80-83-86-90-93 single crochets. Cut and fasten the yarn.

Diagram

All measurements in charts are in cm.

symbols = 1 chain stitch - if you work at the end of crochet hook the chain stitch will often be too tight 1 chain stitch should be just as long as 1 single/double crochet is wide.
symbols = 3 chain stitches
symbols = 4 chain stitches
symbols = 1 double crochet around chain stitch/chain space
symbols = At the beginning of round work 3 chain stitches, finish round with 1 slip stitch in 3rd chain stitch at beginning of round, then work 1 slip stitch in every treble crochet until chain space.
symbols = At beginning of round work 3 chain stitches, finish round with 1 slip stitch in 3rd chain stitch at beginning of round.
symbols = Begin on this round, previous round has already been worked
symbols = On this round not enough stitches have been increased to work A.2b, move on and finish round as explained at the beginning of A.2a. On next round work A.2b as shown in diagram (= 4 chain stitches).
diagram
diagram
diagram
diagram
signature-image signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 211-7) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (16)

country flag François wrote:

Bonjour, dans l'explication, au chapitre empiècement après les augmentations pour diviser le devant et derrière des manches, vous dites de faire 8 arceaux sous la manche et pour la deuxième manche vous dites 8 mailles en l'air. Je pense qu'il y a une erreur sur l'une des deux. Laquelle faut-il retenir 8 mailles ou 8 arceaux ? Merci de me renseigner. Christel

28.09.2020 - 11:52

DROPS Design answered:

Bonjour Mme François, il faut faire 8 mailles en l'air sous les 2 manches, merci pour votre retour, les explications vont être corrigées de suite. Bon crochet!

28.09.2020 kl. 12:28

country flag Lucia wrote:

Buongiorno, esiste una versione cardigan di questo modello? Grazie❣

24.05.2020 - 15:05

DROPS Design answered:

Buongiorno Lucia. Purtroppo per questo modello non è prevista la versione cardigan. A questo link trova altri nostri cardigan all'uncinetto, che potrebbero piacerle. Buon lavoro!

24.05.2020 kl. 17:33

country flag Sonia wrote:

Bonjour. Avez-vous des patrons au crochet pour gauchères, en français? Les croquis pour droitières sont trop difficiles à suivre... J'en cherche depuis des années et je n'ai jamais trouvé... :-( Merci!

18.05.2020 - 16:08

DROPS Design answered:

Bonjour Sonia, nous sommes toutes droitières, je suis désolée, en revanche, cette leçon explique comment lire un diagramme et vous permettre peut-être de les adapter à votre façon de faire? Bonne chance!

19.05.2020 kl. 07:37

country flag Salky wrote:

Can anyone help with pattern? I'm ok until yoke! ( I think)

09.05.2020 - 17:58

DROPS Design answered:

Dear Salky, you are welcome to ask your question here - and/or request individual assistance from the store where you bought the yarn. Happy crocheting!

11.05.2020 kl. 09:33

country flag Susanne Glans wrote:

Super modern und luftig. Anleitung gerne diesen Sommer

10.04.2020 - 16:24

country flag Stefanie Spira wrote:

Sieht wirklich klassisch schön aus, aber damit ich das Teil im Sommer noch tragen kann, bräuchte ich langsam eine Anleitung. Im Voraus lieben Dank.

07.04.2020 - 08:56

country flag Angelica Neef wrote:

Why tooks the pattern so long

30.03.2020 - 10:40

country flag Anne Helen Jacobsen wrote:

Nydelig. Flott sommerplagg. Kommer til å hekle denne.

26.02.2020 - 08:13

country flag Susan Leeks wrote:

I love this design! I'm looking forward to crocheting this for spring! Thank you for this beautiful pattern!

17.02.2020 - 17:51

country flag Hanne wrote:

Ser frem til at opskriften kommer 😊

13.02.2020 - 21:55

Post a comment to pattern DROPS 211-7

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.