DROPS / 147 / 8

Candy by DROPS Design

Knitted DROPS jumper in garter st with dropped sts and ¾ sleeves in 2 strands "Safran". Size: S - XXXL.

DROPS design: Pattern no e-208
Yarn group A + A
-----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 84-92-100-110-122-132 cm /
33''-36¼''-39 3/8''-43 3/8''-48''-52''
Full length: 54-56-58-60-62-64 cm /
21¼''-22''-22¾''-23 5/8''-24 3/8''-25¼''

Materials:
DROPS SAFRAN from Garnstudio
100-100-150-150-150-150 g color no 21, beige
100-100-100-100-100-150 g color no 12, peach
100-100-100-100-100-150 g color no 13, raspberry
100-100-100-100-100-150 g color no 55, cerise
50-50-100-100-100-100 g color no 02, medium pink
50-50-50-50-50-50 g color no 10, yellow
50-50-50-50-50-50 g color no 11, strong yellow.
50-50-50-50-50-50 g color no 20, rust

DROPS STRAIGHT NEEDLES size 6 mm / US 10 - or size needed to get 15 sts x 17 rows in pattern according to A.1/A.2 with 2 strands = 10 x 10 cm / 4'' x 4''.
DROPS CIRCULAR NEEDLE size 5 mm / US 8 (40 cm / 16'') - for neck edge.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (100)

100% Cotton
from 2.35 $ /50g
DROPS Safran uni colour DROPS Safran uni colour 2.35 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.85$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth on needle):
K all rows. 1 ridge = 2 rows K.

PATTERN:
See diagrams A.1 and A.2. Diagrams show all rows in pattern seen from RS. NOTE: To avoid the piece being to tight in the sides when working pattern, make 2 YOs inside edge st in each side on every row with dropped sts (instead of 1 YO). Slip both YOs off the needle on next row.

STRIPES:
Change color on every row marked with arrow in A.1 and A.2. Work the stripes in the following order:

A.1:
1 strand rust + 1 strand raspberry
1 strand raspberry + 1 strand peach
2 strands raspberry
1 strand raspberry + 1 strand peach
1 strand peach + 1 strand cerise
1 strand cerise + 1 strand medium pink
2 strands cerise
1 strand cerise + 1 strand medium pink

A.2:
1 strand medium pink + 1 strand beige
2 strands beige
1 strand beige + 1 strand strong yellow
1 strand beige + 1 strand yellow

MEASURING TIP:
Because of the texture on the garment the piece must be held up when measuring otherwise the jumper will be too long when worn.
----------------------------------------------------------

FRONT PIECE:
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Cast on 63-69-75-83-91-99 sts on needle size 6 mm / US 10 with 1 strand rust + 1 strand raspberry. Work in GARTER ST - see explanation above - for 2-2-3-3-4-4 cm / ¾''-¾''-1 1/8''-1 1/8''-1½''-1½''.
Then work PATTERN according to diagram A.1 with 1 edge st in garter st in each side (1st row = RS), AT THE SAME TIME work STRIPES - see explanation above. REMEMBER THE GAUGE!
NOTE: Diagram A.1 is repeated 2 times vertically (until stripes in A.1 are done).
After A.1 change to 1 strand medium pink + 1 strand beige. Work in stockinette st with 1 edge st in garter st in each side until piece measures 34-35-36-37-38-39 cm / 13 3/8''-13¾''-14¼''-14½''-15''-15¼'' - READ MEASURING TIP.
Then work pattern according to diagram A.2 AT THE SAME TIME continue with STRIPES - see explanation above.
When stripes in A.2 are done, continue pattern with the colors in last stripe (1 strand beige + 1 strand yellow) until finished measurements.
AT THE SAME TIME when piece measures 39-40-41-42-43-44 cm / 15¼''-15¾''-16 1/8''-16½''-17''-17¼'' - remember MEASURING TIP, insert 1 marker in each side (marks depth of armhole).
When piece measures 48-50-52-52-54-56 cm / 19"-19 3/4"-20½"-20½"-21 1/4"-22", bind off the middle 21-21-23-23-25-25 sts for neck and finish each shoulder separately.
Then bind off at beg of every row from neck: 2 sts 1 time and 1 st 1 time = 18-21-23-27-30-34 sts remain on shoulder.
Continue to work until piece measures 53-55-57-59-61-63 cm / 21''-21 5/8''-22½''-23¼''-24''-24¾'', work 1 ridge and loosely bind off, piece measures approx. 54-56-58-60-62-64 cm / 21¼''-22''-22¾''-23 5/8''-24 3/8''-25¼''.
Repeat on the other shoulder.

BACK PIECE:
Cast on and work as front piece. Mark the depth of armhole as on front piece.
Continue to work until piece measures 52-54-56-58-60-62 cm / 20½''-21¼''-22''-22¾''-23 5/8''-24 3/8".
Now bind off the middle 25-25-27-27-29-29 sts for neck and finish each shoulder separately. Continue to bind off 1 st on next row from neck = 18-21-23-27-30-34 sts remain on the shoulder.
When piece measures 53-55-57-59-61-63 cm / 21''-21 5/8''-22½''-23¼''-24''-24¾'', work 1 ridge before loosely binding off all sts.
Repeat on the other shoulder.

ASSEMBLY:
Sew the shoulder seams.

SLEEVE:
Pick up from RS 45-47-51-53-57-59 sts between the 2 markers in one side of jumper on needle size 6 mm / US 10 with 1 strand yellow + 1 strand beige. NOTE: If more/fewer sts have been knitted up, dec/inc evenly on 1st row to the correct no of sts.
READ ALL OF THE FOLLOWING SECTION ON SLEEVE BEFORE CONTINUING!
Work PATTERN according to diagram A.2 with 1 edge st in garter st in each side, AT THE SAME TIME work STRIPES – see explanation above but beg at the top of diagram (1st row = WS) and reversed in stripes and work downwards so that you beg with yellow at the top of sleeve and work down towards the rust red. When A.2 has been worked 1 time vertically, change to 1 strand cerise + 1 strand medium pink and continue with A.1 and STRIPES the same way (beg at the top of diagram and reversed in stripes).
AT THE SAME TIME when piece measures 2-2-3-3-4-4 cm / ¾''-¾''-1 1/8''-1 1/8''-1½''-1½'' from markers, dec 1 st in each side. Repeat dec in each side every 9-7-5½-4½-3½-3 cm / 3½"-2 3/4"-2 1/4"-1 3/4"-1 1/4"-1 1/8" 4-5-6-7-8-9 more times (= 5-6-7-8-9-10 dec in total) = 35-35-37-37-39-39 sts.
Continue to work until sleeve measures 47-46-45-44-42-40 cm / 18½"-18"-17 3/4"-17 1/4"-16½"-15 3/4" from markers - remember MEASURING TIP. Work 2 ridges with 1 strand raspberry + 1 strand rust and bind off.
Work the other sleeve the same way.

ASSEMBLY:
Sew underarm and side seams in one in front loop of outermost st.

NECK:
Pick up approx. 70 to 85 sts around the neck on circular needle size 5 mm / US 8 with 1 strand yellow + 1 strand beige. P 1 round and K 1 round, then loosely bind off with P.


This pattern has been corrected. .

Updated online: 27.02.2013
New yarn amount: DROPS SAFRAN from Garnstudio
100-100-150-150-150-150 g color no 21, beige

Diagram

All measurements in charts are in cm.

= K from RS, P from WS
= K from WS
= K 1, 1 YO, on next row K st and slip YO off the needle (= dropped sts)
= change colors
= change colors when diagram is repeated


Comments (100)

Leave your comment!

Maria 25.01.2019 - 17:49:

In der Erklärung des Diagrammes ist das Muster als Hin-und Rückreihe angegeben, also die weissen Kästchen steht für zwei Reihen (Hinreihe rechts, Rückreihe links). Im Diagramm aber werden anhand der Seitenzahlen nur die Hinreihen gezeigt. \r\nAusserdem möchte ich darauf hinweisen, dass die von mir gefertigte Maschenprobe bei 30Grad gewaschen und im Trockner getrocknet wurde. Sie war anschliessend in Länge und Breite 1 cm kleiner.

DROPS Design 28.01.2019 kl. 08:44:

Liebe Maria, die Diagramme zeigen alle Reihen dh die Hin sowie die Rückreihen. Beginnen Sie an der unteren Ecke an der rechten Seite und lesen Sie die Hinreihen rechts nach links, die Rückreihen lesen Sie links nach rechts. DROPS Safran soll nicht im Trockner getrocknet werden - siehe Farbkarte/Pflegehinweise und mehr über die Pflegehinweise lesen Sie hier. Viel Spaß beim stricken!

Malene Schaleck 16.05.2018 - 07:36:

Kan man lave ærmerne lange instedet for 3/4

DROPS Design 16.05.2018 kl. 13:12:

Hei Malene. Selvfølgelig kan du det. Du kan legge inn noen omganger glattstrikk med beige og mellomrosa i overgangen mellom A.2 og A.1 – som på bolen. Du kan enten strikke arbeidet lenger til ønsket lengde eller felle noen masker om du ikke vil ha ermet så vidt nederst. God fornøyelse

Daniela 02.04.2018 - 12:42:

Allora adesso ho capito dove sbagliato. Io consideravo ogni riga come due ferri, visto che la legenda dice al quadretto bianco: Diritto sul diritto e rovescio sul rovescio. Poi invece ho letto bene sul descrizione al paragrafo MOTIVO: I diagrammi mostrano tutti i ferri del motivo, visti sul diritto del lavoro. Se posso un consiglio sarebbe meglio correggere la legenda e indicare solo una maglia diritto. Grazie!

Daniela 02.04.2018 - 10:41:

Buongiorno! Seguendo lo schema, se corretto cosa faccio, mi vengono strisce a maglia rasata mentre dalla foto il modello sembra essere perlopiù fatto a maglia legaccio. Inoltre il primo ferro dritto dopo il ferro dei gettati darebbe due giri a legaccio quindi non risulta uguale il decoro sotto e sopra e devo saltare il ferro facendo rasato...spero di essermi spiegata...

DROPS Design 02.04.2018 kl. 11:05:

Buongiorno Daniela. Lo schema è prevalentemente a legaccio. Le righe con i quadrati con la stellina, sono i ferri di ritorno e vengono lavorati a diritto. In questo modo il decoro risulta uguale sopra e sotto la riga traforata. Buon lavoro!

Federica 27.05.2017 - 15:25:

Io ho provato a fare il campione seguendo lo schema A2 ma nell'eseguire il lavoro secondo me c'è un errore nel 3° o 4°ferro. Qui secondo me è sbagliato lo schema perché per lavorare dritto le maglie dritto su rovescio, dopo aver lavorato il 3° ferro dovrei trovarmi con le maglie a rovescio.. invece non è così... mi trovo con le maglie a dritto. Per favore spiegatemi dove sbaglio.

DROPS Design 27.05.2017 kl. 16:57:

Buongiorno Federica. L'indicazione di lavorare la maglia a dir sul rovescio, significa che le maglie vanno lavorate a diritto sui ferri che lavora sul rovescio del lavoro; sono i ferri di ritorno quando si lavora avanti e indietro. Buon lavoro!

Antonella 13.07.2015 - 16:59:

Salve, sto per ordinare il filato necessario per questo modello taglia M. Le quantità dei vari colori sono corrette? Mi preoccupa il commento della sig.ra Anna del 25.03.2013 alle 13:53. Potete controllare? Grazie per la risposta.

DROPS Design 13.07.2015 kl. 19:25:

Buonasera Antonella, non ci sono segnalazioni particolari a riguardo, il quantitativo indicato è corretto a patto che il suo campione corrisponda esattamente a quello indicato. Buon lavoro!

Post a comment to pattern DROPS 147-8

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.