DROPS / 141 / 35

Lavender Love by DROPS Design

Set consists of: Knitted DROPS hat and mittens in ”Andes”.

Tags: floral, hats, mittens, sets,

DROPS design: Pattern no AN-007
Yarn group E
----------------------------------------------------------
HAT:
Size: One-size
Circumference: approx. 49 cm / 19 1/4'' at the widest
Height: approx. 24 cm / 9½''
To fit head circumference: 54 to 57 cm / 21½"-22½''.

Materials: DROPS ANDES from Garnstudio
Color no 4300, old pink: 100 g

DROPS DOUBLE POINTED NEEDLES size 8 mm / US 11 - or size needed to get 11 sts x 15 rows in stockinette st = 10 x 10 cm / 4'' x 4''.
DROPS CROCHET HOOK size 8 mm / L/11 - for flowers.
----------------------------------------------------------
MITTENS:
Size: One-size
Materials: DROPS ANDES from Garnstudio
Color no 4300, old pink: 100 g

DROPS DOUBLE POINTED NEEDLES size 8 mm / US 11 - or size needed to get 11 sts x 15 rows in stockinette st = 10 x 10 cm / 4'' x 4''.
DROPS CROCHET HOOK size 8 mm / L/11 - for flowers.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (14)

65% Wool, 35% Alpaca
from 7.85 $ /100g
DROPS Andes uni colour DROPS Andes uni colour 7.85 $ /100g
Wool Warehouse Direct Ltd
Order
DROPS Andes mix DROPS Andes mix 8.25 $ /100g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 15.70$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (in the round on needle):
* K 1 round and P 1 round *, repeat from *-*.
--------------------------------------------------------

HAT:
Worked in the round on needle. Loosely cast on 48 sts on double pointed needles size 8 mm / US 11 with Andes. Then work in GARTER ST- see explanation above - until piece measures 3 cm / 1 1/8''. On next round, inc 6 sts evenly = 54 sts. Continue in stockinette st until piece measures 20 cm / 8''. Then dec as follows:
ROUND 1: * K 4, K the next 2 tog *, repeat from *-* the entire round = 45 sts (= 9 sts dec).
ROUND 2 (and then every even numbered round): K all sts.
ROUND 3: * K 3, K the next 2 tog *, repeat from *-* the entire round = 36 sts.
ROUND 5: * K 2, K the next 2 tog *, repeat from *-* the entire round = 27 sts.
ROUND 7: * K 1, K the next 2 tog *, repeat from *-* the entire round = 18 sts.
ROUND 8: K2 tog around = 9 sts. Cut the thread and pull it through the remaining sts, tighten tog and fasten.

FLOWER:
ROW 1: Ch 19 on hook size 8 mm / L/11 with Andes, 1 sc in 2nd ch from hook, then 1 sc in every ch, turn.
ROW 2: In every sc work 1 sc and ch 1, finish with 1 sc in last sc , turn.
ROW 3: In every sc work 1 sc and ch 1, in every ch-space work 1 sc and ch 1, finish with 1 sc in last sc, fasten off.
Twirl the spiral into a flower and fasten it tog with a couple of stitches. Sew the flower on to the hat.
--------------------------------------------------------

LEFT MITTEN:
Worked in the round. Loosely cast on 24 sts on double pointed needles size 8 mm / US 11 with Andes. Work in GARTER ST- see explanation above - until piece measures 3 cm / 1 1/8''. Then continue in stockinette st until finished measurements. When piece measures 9 cm / 3½'', work an opening for thumb on next round as follows: Work 6 sts, slip the next 4 sts on a stitch holder, work the rest of round. On next round cast on 4 new sts over the sts on holder. Continue until piece measures approx. 19 cm / 7½''. Then dec as follows:
ROUND 1: * K 4, K the next 2 tog *, repeat from *-* the entire round = 20 sts (= 4 sts dec).
ROUND 2 (and then every even numbered round): K all sts.
ROUND 3: * K 3, K the next 2 tog *, repeat from *-* the entire round = 16 sts.
ROUND 5: * K 2, K the next 2 tog *, repeat from *-* the entire round = 12 sts.
ROUND 7: * K 1, K the next 2 tog *, repeat from *-* the entire round = 8 sts.
Cut the thread and pull it through the remaining sts, tighten tog and fasten. Piece measures approx. 24 cm / 9½'' vertically.

THUMB:
Worked in the round. Slip the 4 sts from stitch holder back on double pointed needles, pick up 4 new sts along the opening = 8 sts divided on double pointed needles. Work in stockinette st in the round until thumb measures approx. 6 cm / 2 3/8'' (measured from where sts were slipped back on needles). On next round, K 2 tog around = 4 sts. Cut the thread and pull it through the remaining sts and tighten tog.

RIGHT MITTEN:
Work as left mitten but work round with opening for thumb as follows: Work 14 sts, slip the next 4 sts on a stitch holder, work the remaining 6 sts. Then work as on left mitten.

FLOWER:
ROW 1: Ch 13 on hook size 8 mm / L/11 with Andes, 1 sc in 2nd ch from hook, then 1 sc in every ch, turn.
ROW 2: In every sc work 1 sc and ch 1, finish with 1 sc in last sc , turn.
ROW 3: In every sc work 1 sc and ch 1, in every ch-space work 1 sc and ch 1, finish with 1 sc in last sc, cut and fasten the thread.
Twirl the spiral into a flower and fasten it tog with a couple of stitches. Work another flower the same way, fasten a flower on each mitten.

Comments (14)

Leave your comment!

Donatella 09.01.2018 - 17:46:

Grazie per la risposta, mi ha fatto riflettere che è meglio farle a uncinetto: con i 4 ferri non sono pratica, con quelli diritti dovrei fare tutti i calcoli e poi la cucitura viene troppo spessa.

Donatella 09.01.2018 - 17:06:

Buonasera, ho realizzato berretto e scaldacollo 140-43 e volevo abbinare queste muffole: è possibile la lavorazione con i ferri diritti? In alternativa vi chiedo se esistano dei guanti lavorati in Eskimo (o gruppo E) con i ferri diritti. Grazie Donatella

DROPS Design 09.01.2018 kl. 17:13:

Buonasera Donatella, può lavorare le muffole con i ferri dritti adattando il modello, anche se la lavorazione in tondo è molto più semplice. Per i guanti solitamente vengono utilizzati i ferri circolari. Buon lavoro!

Ulla Anderstedt 18.12.2013 - 20:51:

Jag har lagt upp 48 m på st 8 enl mönstet, men det blir alldeles för litet. Ska jag öka antal maskor?

DROPS Design 19.12.2013 kl. 09:27:

Hej Ulla. Er din strikkefasthed korrekt? Rätst traekker mere sammen en slätst, men din hue skal naar du har 54 m (etter rätst) vaere 49 cm bred (11 m per 10 cm).

Cécile 30.11.2013 - 21:18:

Bonjour, Peut on utiliser des aiguilles circulaires à la place des aiguilles double pointes pour ce modèle?

DROPS Design 01.12.2013 kl. 20:40:

Bonjour Cécile, vous pouvez utiliser une aiguille circulaire et tricoter en rond en suivant la technique du magic loop (cf vidéo ci-dessous). Bon tricot!

Kati 05.05.2013 - 19:11:

Armas müts, alläär kipub venima aint

Anja 31.12.2012 - 10:10:

Habe die Handschuhe für den Krabbelsack gestrickt. Kam super an. Und sie sind ja super schnell gestrickt. Danke für die schöne Idee.

Rosanna Murgia 12.12.2012 - 11:04:

Hello everybody! I love this pattern.I have two balls of Andes and have casted on loosly the given stiches but I find that even if it's a one-size hat it is very small. What can I do? Thank you very much ...have a Happy Christmas

Elva Mateo Diaz 11.10.2012 - 04:22:

Los felicito. gracias a ustedes estoy aprendiendo a tejer,sus modelos son muy bonitos y faciles de hacer muchas gracias

Isa 20.06.2012 - 17:45:

J'adore, vivement les explications !!!

Maria Aparecida . 18.06.2012 - 01:03:

Achei bemgracioso este conjunto de luvas e gorro com flor. parab'ens.

Post a comment to pattern DROPS 141-35

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.