DROPS Extra / 0-437

White Harbour by DROPS Design

DROPS dress in in “Paris” with crochet yoke.

  • White Harbour / DROPS Extra 0-437 - DROPS dress in in “Paris” with crochet yoke.
Size: S – M – L – XL – XXL -XXXL

Finished measurements:
Bust: 80-88-96-104-114-124 cm / 31½"-34½"-37 3/4"-41"-45"-48 3/4"
Full length: 88-90-92-94-96-98 cm / 34½"-35½"-36 1/4"-37"-37 3/4"-38½"

Materials: DROPS Paris from Garnstudio
450-500-550-600-650-700 g color no 16, white
100-100-100-100-100-100 g color no 29, light blue
50-50-50-100-100-100 g color no 28, navy blue

DROPS circular needle size 5 mm / US 8 (40 and 80 cm / 16'' and 32'') - or size needed to obtain 17 sts x 22 rows in stockinette st = 10 x 10 cm / 4'' x 4''.
DROPS crochet hook size 4.5 mm/US 7 – or size needed to obtain 12 dc x 9 rows = 10 x 10 cm / 4'' x 4''.

DROPS Metal button, #542: 1 piece.

-------------------------------------------------------
Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here
-------------------------------------------------------


100% Cotton
from 1.80 $ /50g
DROPS Paris uni colour DROPS Paris uni colour 2.20 $ /50g
Purple Sheep Yarns
Order
DROPS Paris recycled denim DROPS Paris recycled denim 1.80 $ /50g
Purple Sheep Yarns
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 21.60$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
Garter st, in the round: K 1 round, P 1 round.

Stripes: See diagram M.1 and M.2. Crochet 1 vertical repeat of M.1 and then complete piece in M.2.

Decreasing tip-1:
Dec as follows before marker: K 2 tog.
Dec as follows after marker: slip 1 st as if to K, K1, psso.

Decreasing tip-2: Dec dc-groups at the end of row as follows: work row until no of dc-groups to be dec remain and turn piece. Dec dc-groups at the beg of row as follows: crochet sl sts on the no of sts to be dec.
--------------------------------------------------------------------

Dress:
Cast on 184-196-208-220-236-248 sts on circular needle size 5 mm / US 8 with white. Work 6 rounds garter sts. Insert 1 marker each side (= 92-98-104-110-118-124 sts on front and back piece).
Continue in stockinette st. REMEMBER THE GAUGE!
At the same time when piece measures 4 cm / 1½'' dec 1 st on both sides of each marker – see Decreasing tip-1 – on every 3.5 cm / 1 1/4'' a total of 15 times for all sizes = 124-136-148-160-176-188 sts (= 62-68-74-80-88-94 sts on back and front pieces).
When piece measures 53 cm / 21'' for all sizes work 4 rows garter st and bind off.

Yoke:
Work back and front piece separately and sew tog at sides afterwards.

Back piece:
Crochet along back piece on crochet hook size 4.5 mm/US 7 with white as follows: 1 sc in each of the first 4-4-7-6-6-9 sts, *skip 1 st, 1 sc in each of the next 3 sts*, repeat from *-* until 2-0-3-2-2-5 sts remain, 1 sc in each of these = 48-52-58-62-68-74 sc. Now work stripes – see above – and continue as follows:
Row 1: ch 3, 2 dc in second sc from edge, *skip 1 sc, 2 dc in next sc*, repeat from *-* = 48-52-58-62-68-74 dc (= 24-26-29-31-34-37 dc-groups).
Row 2: ch 3, 2 dc between the first 2 dc-groups, then 2 dc between all dc-groups, and finish with 2 dc in 3rd ch from beg of previous row = 24-26-29-31-34-37 dc-groups.
Repeat second row.
When piece measures 14-15-16-17-18-19 cm / 5½''-6''-6¼''-6¾''-7''-7½'' bind off for armhole each side on every row – see Decreasing tip-2: Dec 2 dc-groups 1 time and then 1 dc-group 0-0-1-2-3-4 times = 20-22-23-23-24-25 dc-groups left.
At the same time when yoke measures 24-26-28-30-32-34 cm / 9½"-10 1/4"-11"-11 3/4"-12½"-13½" divide the piece in two for split and complete each side separately.
Continue as before on the 10-11-11-11-12-12 dc-groups.
When yoke measures 30-32-34-36-38-40 cm / 11¾''-12½''-13 3/8''-14¼''-15''-15¾ crochet 2 rows, but only on the 5-6-6-6-6-6 dc-groups towards armhole.
Repeat on the 10-11-11-11-12-12 dc-groups on the other side.

Front piece:
Crochet as back piece. Bind off for armhole as described for back piece.
At the same time when yoke measures 20-22-24-26-28-30 cm/8"-8 3/4"-9½"-10 1/4"-11"-11 3/4" continue on 6-7-7-7-7-7 dc-groups on one side only, and dec 1 dc-group towards neckline on next row = 5-6-6-6-6-6 dc-groups left on shoulder.
Cut the thread when yoke measures 32-34-36-38-40-42 cm / 12½''-13 3/8''-14¼''-15''-15¾''-16½''. Repeat the other side.

Assembly:
Sew shoulder seams. Sew side seams inside 1 edge st.

Crochet borders: Crochet a row of sc round neckline on crochet hook size 4.5 mm/US 7 with white as follows: beg at bottom of split on back piece, crochet round split and neckline. Chain 4 for buttonhole, crochet along other side of split and finish with 1 sl st in sc from beg of round. Sew on button.

Crochet a row of sc round each armhole.

Crochet a border along bottom edge of dress as follows:
Round 1: *1 sc in each of the first 3 sts, skip 1 st*, repeat from *-* until 0-4-0-4-4-0 sts remain, crochet 1 sc in each remaining st = 138-148-156-166-178-186 sc, and finish with 1 sl st in first sc from beg of round.
Round 2: ch 3, 1 dc in first sc, *skip 1 sc, 2 dc (= 1 dc-group) in next sc*, repeat from *-* and finish with 1 sl st in 3rd ch from beg of round = 69-74-78-83-89-93 dc-groups.
Round 3: ch 3, then continue with 2 dc between each dc-group from previous round. Finish with 1 sl st in 3rd ch from beg of round.

Diagram

All measurements in charts are in cm.

symbols = white
symbols = navy blue
symbols = light blue
diagram
diagram
signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Extra 0-437) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (12)

country flag Nicoline 02.02.2019 - 21:34:

Wat wordt bedoelt met onderstaande? Minder tegelijkertijd vanaf een hoogte van 4 cm 15 x 1 st aan weerskanten van beide merkdraden op elke 3½ cm ik heb de 15 steken 2x op 1 naald geminderd maar ik krijg een totaal andere onderkant dan op de foto. Ik kom de "tegelijkertijd" in meerdere patronen tegen maar kom er maar niet achter wat jullie daar nu eigenlijk precies mee bedoelen. alvast bedankt.

user icon DROPS Design 03.02.2019 kl. 11:09:

Nicole,

Je mindert steeds 1 steek aan elke kant van het werk en dat doe je 15 keer met 3,5 cm ertussen. (Dus niet 15 steken in een keer afkanten.

country flag CHANTAL HIRIART 03.05.2018 - 08:53:

Bonjour, Je suis débutante dans le crochet. Dans l'ensemble je regarde les vidéos qui m'aident bien mais je ne comprends pas cette phrase : A 32 cm de hauteur d'empiècement, crocheter 2 rangs sur les seuls 6 groupes de brides côté emmanchure. Comment doit-on crocheter? Merci d'avance.

user icon DROPS Design 03.05.2018 kl. 09:47:

Bonjour Mme Hiriart, vous formez ici les épaules, crochetez les 6 premiers groupes de brides en début de rang, tournez (laissez les autres mailles de la fin du rang non travaillées) et crochetez le rang suivant sur ces 6 groupes de brides, arrêter. Tournez et crochetez les 6 premiers groupes de brides de l'autre côté pour l'épaule (= les mailles centrales restent non travaillées pour l'encolure), tournez et crocheter le rang suivant sur ces 6 groupes de brides. Bon crochet!

country flag Reix 26.03.2018 - 20:07:

Bonsoir, merci de votre réponse mais j'aimerais savoir comment on calcul le nombre de pelotes qu'il faut par rapport à la taille. Merci

user icon DROPS Design 28.03.2018 kl. 14:54:

Bonjour Mme Reix, vous trouverez sous le nuancier de chaque qualité le poids de la pelote, soit pour Paris, c'est 50 g la pelote, divisez le poids total pour votre taille par 50 pour obtenir le nombre de pelotes. Bon tricot!

country flag Reix 26.03.2018 - 12:43:

Bonjour, combien de pelotes me faut il pour réaliser le modèle drops extra 0-437 en taille 40. Merci de votre réponse. Françoise

user icon DROPS Design 26.03.2018 kl. 13:15:

Bonjour Mme Reix, vous trouverez la quantité nécessaire pour chaque taille, au poids, dans l'entête du modèle. DROPS Paris = 50 g la pelote, il vous faudra par ex en taille S: 9 pelotes col. 16, 2 pelotes col 29 et 1 pelote col. 28. Bon tricot!

country flag Reix 24.03.2018 - 12:59:

Bonjour, combien de pelotes me faut- il pour une taille 40 mais d'une seule couleur (uni). Merci de votre réponse

user icon DROPS Design 26.03.2018 kl. 11:01:

Bonjour Mme Reix, vous pouvez additionner les différentes quantités de chaque couleur, il vous en faudra probablement un peu moins, mais vous serez ainsi certaine d'en avoir suffisamment. Bon tricot!

country flag Ann Jansson 28.01.2018 - 21:13:

Denna klänning är så fin, skulle passa som barnklänning också. Kan ni göra mönster i samma stil för barn ? Skulle uppskattas mycket. Gärna i ett lite tunnare garn. Typ Safari. Tack på förhand.

user icon DROPS Design 30.01.2018 kl. 11:55:

Har du set denne, det er næsten samme model Mint Crush!

country flag Ester Martínez 17.05.2016 - 12:04:

Necesito saber cuantas cadenetas necesito montar para el canesú en la talla Mediana y Grande. Gracias

user icon DROPS Design 21.05.2016 kl. 18:51:

Hola Ester. No hay que montar cadenetas adicionales. Se trabajan puntos bajos en la parte superior del cuerpo.

country flag Katharina 22.12.2014 - 19:33:

Hallo, kann ich für dieses Kleid auch Drops Cotton Viskose nehmen? Es ist doch auch eine Baumwolle wie Drops Paris. Mir gefällt nämlich der schöne Glanz von Cotton Viskose. Das kann ich mir für das Kleid gut vorstellen. Danke für die Hilfe vorab.

user icon DROPS Design 06.03.2015 kl. 12:16:

Sie können Cotton Viscose doppelt verwenden, das entspricht einfädigem Paris. Cotton Viscose gehört in Garngruppe A und Paris in Gruppe C, 1 Faden C entspricht 2 Fäden A. Beachten Sie, dass Sie die benötigte Garnmenge anhand der Lauflänge neu berechnen müssen und dass Sie die Maschenprobe einhalten.

country flag Kathrine Dybvik 25.06.2014 - 13:07:

Hei! For meg ser det ut for at det er en kant nedenfor de tre rillene på skjøtet. Hvo på mønstret finner jeg det?

user icon DROPS Design 25.06.2014 kl. 13:47:

Hei Kathrine. Ja, det er sandt. Det staar nederst i mönstret under Montering: Hekle 1 kant nederst slik:

country flag LillySmuul 25.02.2011 - 21:46:

Could you add at the beginning that one button is needed.

Post a comment to pattern DROPS Extra 0-437

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.