Like it? Share it!

You might also like...

related pattern
related pattern
related pattern
related pattern
  1. Free patterns
  2. Baby (0-4)
  3. Cardigans
  4. DROPS Baby
  5. 13
  6. 15

Leonard by DROPS Design

DROPS Jacket, socks and soft toy in Alpaca

Keywords: bottom up, colorwork, jacket, long sleeves, nordic, rib-shifting, round neck, round yoke, set, socks, spiral, toy

Like it? Share it!

DROPS Baby 13-15
Size: 1/3 – 6/9 – 12/18 months (2 – 3/4 years)

Materials: DROPS Alpaca from Garnstudio
Jacket:
150-150-150 (200-200) g color no 0302, camel
50 g for all sizes in the following colors:
0100, off-white, 0401, brown, 0618, beige-mix, 6205 baby blue, 6309 gray-turquoise

DROPS circular needle and double pointed needle size 2.5 mm / US 1.5 (for rib) and 3 mm

DROPS burnt wooden button, no 523, 6-6-6 (7-7) pcs

Socks:
100 g for all sizes color no 6205, baby blue
DROPS double pointed needle size 5 mm / US 8


-------------------------------------------------------

Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


100% Alpaca 		from 4.85 $ /50g
DROPS Alpaca uni colour DROPS Alpaca uni colour 4.85 $ /50g
Wool Warehouse Direct Ltd 		Order
DROPS Alpaca mix DROPS Alpaca mix 5.10 $ /50g
Wool Warehouse Direct Ltd 		Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 38.80$. Read more.

You might also like...

related pattern
related pattern
related pattern
related pattern

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
JACKET:
Knitting gauge: 24 sts x 32 rows on needles size 3 mm / US 2.5 in stockinette sts = 10 x 10 cm / 4'' x 4''.

Garter sts: Knit all rows

Rib: *K2, P2*, repeat from *-*.

Pattern: See diagrams M.1 and M.2.

Front and back piece:
Knit the jacket back and forth on circular needle from mid front. Cast on 144-160-180 (196-212) sts (incl 1 edge st towards mid front each side, knitted in garter sts throughout) with camel and circular needle size 2.5 mm / US 1.5 and purl 1 row from wrong side. Continue in rib with 1 edge sts and a further 2 sts in garter sts each side.
When piece measures 3 cm / 1 1/8'' change to circular needle size 3 mm / US 2.5 and knit 1 row from the right side, at the same time dec evenly to 125-137-149 (167-179) sts.
Knit 1 row from the wrong side.
Now knit next row as follows from the right side:
1 edge st, M.1A over the next 120-132-144 (162-174) sts, M.1B (= 3 sts) and 1 edge st. Continue the pattern like this.
At the same time, insert a marker 32-35-38 (42-45) sts in from each side = 61-67-73 (83-89) sts between markers on back piece.
When piece measures approx 19-20-23 (27-30) cm – adjust after 2 or 3 rows in stockinette sts after a row with pattern in diagram – bind off 10-10-10 (12-12) sts each side for armhole (i.e. 5-5-5- (6-6) sts each side of markers) = 51-57-63 (71-77) sts on back piece and 27-30-33 (36-39) sts on each front piece.
Put piece aside and knit the sleeves.

Sleeve:
Knit round on double pointed needles size 2.5 mm / US 1.5.
Cast on 44-48-52 (56-60) sts with camel. Knit 1 round and continue in rib.
When sleeve measures 4-5-5- (6-6) cm, change to double pointed needles 3mm/US 2.5. Knit 1 round, at the same time dec evenly to 36-36-42 (42-48) sts.
Purl 1 round and continue in M.1A.
At the same time, when sleeve measures 5-6-6- (7-7) cm inc 2 sts mid under arm a total of 6-8-10 (13-12) times as follows:
Size 1/3 months: alternately on every 5th and 6th round
Size 6/9 +12/18 months: on every 4th round
Size 2 years: alternately on every 3rd and 4th round
Size 3/4 years: on every 5th round
= 48-52-62 (68-72) sts – incorporate the new sts in M.1 as you go along.
When sleeve measures 16-17-19 (23-27) cm – adjust as for back and front pieces – bind off 10-10-10 (12-12) sts mid under arm = 38-42-52 (56-60) sts.
Put the piece aside and knit the other sleeve.

Yoke:
Put sleeves in on the same needle as back and front pieces where you bind off for armholes = 181-201-233 (255-275) sts.
Knit 2-4-6 (1-5) rows stockinette sts (1st row = right side), at the same time adjusting number of sts to 173-191-227 (245-263).
Now continue and dec according to M.2 – see diagram for appropriate size and remember 1 edge st each side.
After the last dec there are 59-65-77 (83-89) sts left, finish M.2.
Now knit 1-2-3 (1-1) rows of stockinette sts with camel, at the same time dec evenly to 42-50-62 (70-74) sts on the last row. Put sts on a thread.

Assembly:
Sew the openings under the arms.

Front edges:
Pick up 85-89-101 (117-129) sts along left front piece with camel and needle size 2.5 mm / US 1.5. Note! If you pick up fewer/more sts that this, you need to adjust number of sts on first row.
Knit 1 row from wrong side, knit 1 row from right side and purl 1 row from wrong side. Now continue in rib with 1 edge st + 2 sts in garter sts towards neckline and 2 edge sts + 2 sts in garter sts towards lower edge (seen from the right side).
When rib measures approx 2.5-3 cm bind off loosely in rib.
Repeat along right front edge, but when rib measures 1 cm / 3/8'', make 6-6-6 (7-7) buttonholes evenly distributed – the top one approx 1 cm / 3/8'' from neck line and the bottom one approx 2 cm / 3/4'' from lower edge.
Make buttonholes by K 2 tog and making a yo.

Neck:
Put sts from thread on yoke on needle size 2.5 mm / US 1.5 and pick up an additional 6 sts over each front edge with baby blue = 54-62-74 (82-86) sts on row (number of sts is dividable by 4 +2).
Knit 1 row from the wrong side, 1 row from the right side and 1 row from the wrong side. Continue in rib with 2 edge sts each side towards mid front (seen from the right side). Bind off loosely in rib when rib measures approx 4-6 cm.
Fold neck double towards the wrong side and attach with neat sts – make sure the seam doesn’t pull.
_________________________________________

SOCKS:

Foot length: approx 10-11-12 (14-15) cm

Knitting gauge: 17 sts x 22 rows with 2 strands of Alpaca on needle size 5 mm / US 8 in stockinette sts = 10 x 10 cm / 4'' x 4''.

Rib: *K2, P2*, repeat from *-*.

Loosely cast on 28-32-36 (40-44) sts with 2 strands of Alpaca on double pointed needles size 5 mm / US 8. Knit 6-6-7 (8-8) cm rib.
Now knit 1 row, shifting the rib 1 st to the left as follows: over (K2, P2) it will be (P1, K2, P1).
*Knit 3 rounds with K over K and P over P, on 4th round shift the rib 1 st to the left*, repeat from *-* until piece measures 25-26-27 (29-30) cm.
Now purling all purled sts tog 2 and 2, knit 2 rounds with K over K and P over P, work 1 round knitting all knitted sts tog 2 and 2, work 2 rounds with K over K and P over P and work 1 round knitting all knitted sts tog 2 and 2 = 7-8-9 (10-11) sts.
Cut the thread and pull through the remaining sts, fasten.
The sock measures approx 28-29-30 (32-33) cm.

---------------------------------------------------------
SOFT TOY: see pattern 13-33
---------------------------------------------------------

Diagram

All measurements in charts are in cm.

symbols = beige-mix
symbols = off-white
symbols = grey-turquoise
symbols = baby blue
symbols = brown
symbols = camel
symbols = knit from right side, purl from wrong side
symbols = purl from right side, knit from wrong side
symbols = k2 tog
symbols = M.2=33 row= approx 10cm = 4"
symbols = M.2=42 row= approx 13cm = 5 1/8"
diagram
diagram

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Baby 13-15) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

signature-image signature

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

Each of our patterns has specific tutorial videos to help you.

These step-by-step tutorials might also help you:

We have also step-by-step guides for different techniques which you'll find here.

And a very handy technical dictionary!
1) Why is the knitting/crochet tension so important?
2) What are the yarn groups?
3) Can I use a different yarn than what the pattern suggests?
4) How do I use the yarn converter?
5) Why do I get the wrong knitting tension with the suggested needle size?
6) Why is the pattern worked top-down?
7) Why are the sleeves shorter in larger sizes?
8) What is a repeat?
9) How do I work according to a knitting diagram?
10) How do I work according to a crochet diagram?
11) How do I work several diagrams simultaneously on the same row/round?
12) Why does the piece start with more chain stitches than it’s worked with?
13) Why increase before the rib edge when the piece is worked top-down?
14) Why increase in the cast-off edge?
15) How do I increase/decrease on every 3rd and 4th row/round alternately?
16) Why is the pattern slightly different than what I see in the photo?
17) How can I work a jacket in the round instead of back and forth?
18) Can I work a jumper back and forth instead of in the round?
19) Why do you show discontinued yarns in the patterns?
20) How do I make a women’s size garment into a men’s size one?
21) How do I prevent a hairy garment from shedding?
22) Where on the garment is the length measured?
23) How do I know how many balls of yarn I need?

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (14)

country flag Pirkko Nerg wrote:

SIIS MISSÄ ON MALLIN M1 JA M2 PIIRROKSET? TODELLA HUONOSTI TOTEUTETTU OHJE.

03.01.2023 - 12:52

country flag Nettia wrote:

Guten Abend, meine Frage betrifft die Passe. Ich stricke Grösse 12-18 Monate und habe wie angegeben das mittlere Muster gestrickt. Dh meine letzte Reihe ist camel und jetzt weiss ich nicht weiter. Da steht weiter mit M2 bis zum fertigen Mass. Aber da bin ich mir nicht sicher, denn wenn man das Bild anschaut, dann ist der Abschluss der Passe das Muster und nicht 10 cm camel. Wenn Sie mir helfen könnten, wäre das super. Vielen Dank Nettia

26.08.2021 - 00:22

DROPS Design answered:

Liebe Nettia, in 12/18 Mon. stricken Sie zuerst bei der Passe 6 Reihen glatt rechts, dann die 33 Reihen in M.2 dann noch 3 Reihen glatt rechts (beachten Sie, daß Ihre Maschenprobe in der Höhe stimmt, dh 32 R = L10 cm) - Passe ist jetzt fertig, die Maschen legen Sie still und Halsblende wird nach den beiden Blenden gestrickt. Viel Spaß beim stricken!

26.08.2021 kl. 08:42

country flag Tupu wrote:

Mistä löytyy ohjeen mallipiirustus?

31.10.2020 - 16:18

DROPS Design answered:

Hi Topu! At the bottom of the pattern. Happy knitting!

23.11.2020 kl. 18:56

country flag Gitte wrote:

Jeg forstår ikke størrelserne, jeg skal strikke jakken i str 80/86 (1-1,1/2 år) men jeg synes at det ser ud som om i mener at str 12/18 mdr=74/80 og ikke 80/86, kan I hjælpe lidt med str. på denne jakke?

16.04.2017 - 21:51

DROPS Design answered:

Hej, vi har skrevet opskriften i 5 størrelser(bindestreg imellem hver størrelse): 1/3 måneder - 6/9 måneder - 12/18 måneder - 2 år - 3/4 år. Det vil sige at: 1/3 måneder = 50/56cm 6/9 måneder = 62/68cm 12/18måneder = 74/80cm 2 år = 86/92cm 3/4 år = 98/104cm

28.04.2017 kl. 08:21

country flag Christina wrote:

I M2 tredje varvet uppifrån (12/18 mån) ska det vara vitt garn där man tar två räta tillsammans, eller ska det vara beigemix?

21.09.2014 - 18:14

DROPS Design answered:

Hej Christina, Det skall vara beigemix.

23.09.2014 kl. 14:49

country flag Angeline wrote:

Can have use coton to replace alpaga please thank angeline

04.11.2007 - 21:19

country flag Gitte Norlander wrote:

Hvor er den flot ! Den glæder jeg mig allerede til at lave.

19.05.2006 - 21:05

Hilde wrote:

Desse fargane var kjempefine i lag!

25.03.2006 - 21:36

Mii wrote:

Superfin kofta & fina sockor! ..men det skulle vara fint med en mössa till! ;O)

15.03.2006 - 14:53

Agneta wrote:

härliga färger,mysig kofta m. sockar som ser så goa ut att ha på.

15.03.2006 - 13:25

Post a comment to pattern DROPS Baby 13-15

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

© 1982-2023 DROPS Design A/S We reserve all rights. This document, including all its sub-sections, has copyrights.
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.