DROPS / 207 / 17

Golden Puffs by DROPS Design

Knitted jumper in DROPS BabyMerino. The piece is worked in stocking stitch with textured pattern. Sizes S - XXXL.

Tags: jumpers,

DROPS Design: Pattern no bm-071
Yarn group A
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS BABYMERINO from Garnstudio (belongs to yarn group A)
450-450-500-550-600-700 g colour 45, lemon

KNITTING TENSION:
24 stitches in width and 32 rows in height with stocking stitch = 10 x 10 cm.
26 stitches in width and 32 rows in height with structured pattern = 10 x 10 cm.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM.
DROPS CIRCULAR NEEDLE SIZE 3 MM: Length 40 cm and 60 cm or 80 cm for stocking stitch and structured pattern.
DROPS DOUBLE POINTED NEEDLES SIZE 2.5 MM.
DROPS CIRCULAR NEEDLE SIZE 2.5 MM: Length 40 cm and 80 cm for rib.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Wool
from 3.10 £ /50g
DROPS Baby Merino uni colour DROPS Baby Merino uni colour 3.10 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Baby Merino mix DROPS Baby Merino mix 3.10 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 27.90£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN: 
See diagram A.1. The diagram shows all the rows in the pattern seen from the right side.

DECREASE/INCREASE TIP (evenly spaced):
To work out how to decrease/increase evenly, count the total number of stitches on needle (e.g. 232 stitches) and divide by the number of decreases/increases to be made (e.g. 44) = 5.3. In this example, decrease by working together approx. each 4th and 5th stitch. When increasing make1 yarn over after approx. each 5th stitch. On the next round work the yarn overs twisted to avoid holes.

INCREASE TIP (for sides of body and mid under sleeves):
Work until there are 3 stitches left before marker thread, 1 yarn over, knit 6 (marker thread sits in middle of these 6 stitches), 1 yarn over (= 2 stitches increased). On the next round work the yarn overs twisted to avoid holes. Then work the new stitches in stocking stitch/textured pattern.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JUMPER – SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round, bottom up as far as the armholes, then the front and back pieces are finished separately, back and forth with circular needle. The sleeves are worked in the round with double pointed needles/short circular needle, bottom up.

BODY:
Cast on 232-260-288-312-352-384 stitches with circular needle size 2.5 mm and BabyMerino. Knit 1 round then work rib in the round (= knit 2/ purl 2) for 4 cm. Knit 1 round where you decrease 44-52-56-60-68-76 stitches evenly spaced – read DECREASE/INCREASE TIP = 188-208-232-252-284-308 stitches.
Insert 1 marker thread at the beginning of the round and 1 marker thread after 94-104-116-126-142-154 stitches and allow them to follow your work onwards; they will be used when increasing in the sides.
Change to circular needle size 3 mm and work stocking stitch in the round. REMEMBER THE KNITTING TENSION!
When the piece measures 10 cm in all sizes increase 1 stitch on each sides of both marker threads – read INCREASE TIP = 192-212-236-256-288-312 stitches.
When the piece measures 18 cm in all sizes knit 1 round where you increase 16-20-20-24-24-32 stitches evenly spaced (i.e. increase 8-10-10-12-12-16 stitches on the front piece and 8-10-10-12-12-16 stitches on the back piece) = 208-232-256-280-312-344 stitches.
Then work A.1 in the round.
AT THE SAME TIME when the piece measures 20 cm, increase 1 stitch on each side of both marker threads – remember INCREASE TIP (= 4 stitches increased). These 4 stitches are worked in stocking stitch until next increase in each side. Repeat this increase when the piece measures 30 cm = 216-240-264-288-320-352 stitches on the needle. Continue the pattern as before.
When the piece measures 33-34-35-36-37-38 cm, cast off for the armholes; i.e. the next round is worked as follows: Cast off 3 stitches for the armhole, continue pattern as before over the next 102-114-126-138-154-170 stitches, cast off 6 stitches for the armhole, continue pattern as before over the next 102-114-126-138-154-170 stitches and cast off the last 3 stitches for the armhole. Cut the strand. The front and back pieces are finished separately.

BACK PIECE:
= 102-114-126-138-154-170 stitches. Continue the pattern as before and cast off stitches for the armholes at the start of the rows in each side as follows: Cast off 3 stitches 0-1-1-1-1-1 time in each side, cast off 2 stitches 0-0-2-3-5-7 times in each side and cast off 1 stitch 1-2-4-6-10-12 times in each side = 100-104-104-108-108-112 stitches left. Continue the pattern as before.
When the piece measures 50-52-54-56-58-60 cm, cast off the middle 40-44-44-48-48-52 stitches for the neck and each shoulder is finished separately. Continue the pattern and cast off 2 stitches on the next row from the neck = 28 stitches left on the shoulder in all sizes.
Continue working until the piece measures 51-53-55-57-59-61 cm. Knit 1 row from the wrong side and then cast off with knit from the right side. Work the other shoulder in the same way.
The jumper measures approx. 52-54-56-58-60-62 cm from the shoulder down.

FRONT PIECE:
= 102-114-126-138-154-170 stitches. Continue the pattern as before and cast off stitches for the armholes at the beginning of each row in each side as follows: Cast off 3 stitches 0-1-1-1-1-1 time in each side, 2 stitches 0-0-2-3-5-7 times in each side and 1 stitch 1-2-4-6-10-12 times in each side = 100-104-104-108-108-112 stitches left. Continue the pattern as before.
When the piece measures 44-46-48-50-52-54 cm, place the middle 26-30-30-34-34-38 stitches on 1 thread for the neck but to avoid cutting the strand work these stitches before placing them on the thread. Each shoulder is finished separately.
Continue the pattern and cast off stitches for the neck at the beginning of each row from the neck as follows: Cast off 2 stitches 3 times and then 1 stitch 3 times = 28 stitches left on the shoulder in all sizes.
Work until the piece measures 51-53-55-57-59-61 cm. Knit 1 row from the wrong side and then cast off with knit from the right side. Work the other shoulder in the same way.

SLEEVE:
The sleeve is worked in the round with double pointed needles, bottom up. Change to short circular needle when necessary.
Cast on 64-68-72-76-80-84 stitches with double pointed needles size 2.5 mm and BabyMerino. Knit 1 round then work rib in the round (= knit 2/ purl 2) for 8 cm. Knit 1 round where you decrease 14-16-16-18-20-22 stitches evenly spaced – read DECREASE/INCREASE TIP = 50-52-56-58-60-62 stitches.
Insert 1 marker thread at the beginning of the round = mid under sleeve and allow it to follow your work onwards; it will be used when increasing mid under sleeve.
Change to double pointed needles size 3 mm and work stocking stitch in the round.
When the sleeve measures 11-9-11-9-11-9 cm, increase 2 stitches mid under the sleeve – read INCREASE TIP. Increase like this every 2½-2½-2-2-1½-1½ cm a total of 15-17-18-20-23-25 times = 80-86-92-98-106-112 stitches. Continue working until the sleeve measures 50-50-49-48-47-46 cm. The next round is worked as follows: Start 3 stitches before the marker thread, cast off 6 stitches (= mid under sleeve) and work stocking stitch to end of round.
Now work the sleeve cap back and forth with circular needle size 3 mm as follows:
Continue with stocking stitch and AT THE SAME TIME cast off stitches on each side as follows: Cast off 3 stitches 1-1-1-1-0-0 time on each side, 2 stitches 3-4-5-5-5-5 times on each side and 1 stitch 2-2-3-5-8-11 times on each side. Then cast off 2 stitches on each side until the sleeve measures approx. 56-56-57-57-58-59 cm. Cast off 3 stitches 1 time on each side and then cast off the remaining stitches. The sleeve measures approx. 57-57-58-58-59-60 cm from the top down. Work the other sleeve in the same way.

ASSEMBLY:
Sew the shoulder seams inside the cast-off edges. Sew in the sleeves inside the 1 edge stitch.

NECK:
Knit up from the right side approx. 108 to 134 stitches around the neck (including the stitches on the thread in front) with short circular needle size 2.5 mm. Knit 1 round where you increase evenly spaced to 128-136-136-148-148-160 stitches (the number of stitches should be divisible by 4).
Work rib in the round (= knit 2 / purl 2) for approx. 3 to 3½ cm. Cast off with knit over knit and purl over purl.

Diagram

= knit from right side, purl from wrong side
= purl from right side, knit from wrong side

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 207-17) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (13)

Joy Bieber 17.10.2019 - 11:44:

Det skal I da bare glemme ALT om . Kan se andre får svar næsten med det samme ?! Mvh Joy

DROPS Design 17.10.2019 kl. 12:27:

Hej. Om du lägger in det som spørgsmål istället för kommentar så ser vi det och svarar fortare. Diagrammet ser du till höger om måttskissen längst ner. Du ska ta ut 12 m jævnt fordelt på forstykke och 12 m jævnt fordelt på ryg, totalt 24 m på 1 omgang. Lycka till!

Joy Bieber 09.10.2019 - 10:49:

Hej igen . Kan iøvrigt heller ej se diagrammet ! Kun hvad de enkelte tegn på hvordan ! Men altså ikke selv opskriften . Mvh Joy

Joy Bieber 09.10.2019 - 10:23:

Hejsa . Jeg er ny strikkerpige . Og er ved og skal tage ud efter de 18 cm ! - 256 masker total . Med 126 markør i mellem hver . Der skal nu tages ud ( 24 masker ) fordelt på for og ryg ! - men de giver jo kun 10 gange ? Og skal bruge 12 hvis jeg forstår det rigtigt. ... hjææælp haha Joy 😊

Loredana 27.09.2019 - 19:38:

Non riesco a capire il diagramma. Sono ripetizioni di 4, quindi il primo ferro sarà diritto rovescio rovescio diritto diritto rovescio rovescio e via dicendo... Ma a me vengono dei quadrati...

DROPS Design 27.09.2019 kl. 21:25:

Buongiorno Loredana. La successione delle maglie è corretta. Il motivo diventa rettangolare in verticale. Risulterà più chiaro dopo aver lavorato almeno le prime 6 righe del diagramma. Può eventualmente fare un campione di prova con il solo diagramma. Buon lavoro!

Ola 01.09.2019 - 11:01:

It's on my list to do, it's so classic, just beautiful. I'm waiting for the pattern 😀 and the wool is ordered right now

Lisbeth 22.07.2019 - 16:37:

Når kommer oppskriften ?

Joy Bieber 14.07.2019 - 14:05:

Simpelhen bare skøn . Totalt nybegynder her , men den skal stikkes . Lemondrops

Johanna H 07.07.2019 - 18:29:

Perfect sunny colour! I love simple but elegant knits like this!

Sandra☆ 26.06.2019 - 22:56:

Vrolijke trui, deze wil ik graag

Johanna 15.06.2019 - 23:26:

Nice structure, original !

Post a comment to pattern DROPS 207-17

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.