DROPS / 170 / 32

Sunny Day Top by DROPS Design

Knitted DROPS top with V-neck, lace pattern and vents in the sides in ”Paris”. Size: S - XXXL.

Tags: lace, tops, v-neck,

DROPS design: Pattern no w-592
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS PARIS from Garnstudio
350-400-450-450-500-550 g color no 16, white

DROPS STRAIGHT NEEDLES size 5 mm / US 8 - or size needed to get 17 sts x 22 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS CIRCULAR Needle size 4 mm / US 6 – for edge in garter st.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (7)

100% Cotton
from 1.80 $ /50g
DROPS Paris uni colour DROPS Paris uni colour 2.20 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Paris recycled denim DROPS Paris recycled denim 1.80 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 12.60$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

PATTERN:
See diagrams A.1 and A.2. The diagrams show all rows in pattern seen from RS.

DECREASE TIP (applies to sides on body, at armholes and neck):
Dec inside 2 edge sts in garter st on front and back piece and inside 3 edge sts in garter st along armholes and neck. All dec are done from RS!
Dec as follows after 2 or 3 edge sts: Slip 1 st as if to K, K 1, psso.
Dec as follows before 2 or 3 edge sts: Beg 2 sts before edge sts and K 2 tog.
----------------------------------------------------------

TOP:
Piece is worked bottom up in two parts.

BACK PIECE:
Cast on 75-85-91-101-111-123 sts on needle size 4 mm / US 6 with Paris. Work 2 ridges in GARTER ST - see explanation above. Insert 1 marker after the first 37-42-45-50-55-61 sts on needle (seen from RS) = 38-43-46-51-56-62 sts on needle after marker, move the marker upwards when working. Switch to needle size 5 mm / US 8 and work in stockinette st with 2 edge sts in garter st in each side. REMEMBER THE KNITTING GAUGE When piece measures 12 cm / 4¾'', dec 1 st in each side - READ DECREASE TIP! Repeat dec every 8-8-7-7-7-7 cm / 3"-3"-2 3/4"-2 3/4"-2 3/4"-2 3/4" a total of 4-4-5-5-5-5 times in each side = 67-77-81-91-101-113 sts. AT THE SAME TIME when piece measures 15-16-17-14-15-16 cm / 6"-6 1/4"-6 3/4"-5½"-6"-6 1/4", work pattern according to diagram A.1 over the middle sts – pattern beg from RS after marker in the middle of piece (see arrow in diagram) – work the other sts as before. When A.1 has been worked 1 time in height continue the pattern towards the edge st in each side as before - adjust to a whole
or half heart - see A.1A and A.1B, (work A.1A in
the right side of work and work A.1B in the left side of work),
inside edge st in each side.

When piece measures 43-44-45-46-47-48 cm / 17''-17¼''-17¾''-18''-18½''-19'', work 2 ridges over the outermost 5-7-8-9-10-11 sts in each side (work the other sts as before). Then bind off the first 2-4-5-6-7-8 sts at beg of the next 2 rows for armholes. Continue pattern with 3 edge sts in garter st in each side (where there is not enough room for a whole or half heart out towards armholes work these sts in stockinette st). AT THE SAME TIME bind off for armholes inside edge st on every other row (i.e. every row from RS) as follows: Dec 1 st 1-4-4-7-10-14 times in total – READ DECREASE TIP = 61-61-63-65-67-69 sts remain on needle. When piece measures 52-54-56-58-60-62 cm / 20½''-21¼''-22''-22¾''-23 5/8''-24 3/8'', work 2 ridges over the middle 29-29-31-31-33-33 sts on needle (work the other sts as before). On next row from RS, bind off the middle 23-23-25-25-27-27 sts for neck and finish each shoulder separately. Continue as before with 3 edge sts in garter st in each side. AT THE SAME TIME dec for neck on every other row as follows: Dec 1 st 3 times in total – READ DECREASE TIP = 16-16-16-17-17-18 sts remain on shoulder. Continue until piece measures 60-62-64-66-68-70 cm / 23 5/8''-24 3/8''-25¼''-26''-26¾''-27½'' and bind off. Repeat on the other shoulder.

FRONT PIECE:
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Cast on and work as on back piece until piece measures 35-37-38-39-40-42 cm / 13 3/4"-14 ½"-15"-15 1/4"-15 3/4"-16½" - NOTE: Do not work A.1 on front piece. Now work pattern according to diagram A.2 over the middle sts – pattern beg from RS after marker in the middle of piece (see arrow in diagram) – work the other sts as before.
ARMHOLE: AT THE SAME TIME when piece measures 43-44-45-46-47-48 cm / 17''-17¼''-17¾''-18''-18½''-19'', work 2 ridges over the outermost 5-7-8-9-10-11 sts in each side as on back piece (work the other sts as before). Then bind off for armhole in the side as on back piece.
V-NECK: AT THE SAME TIME when A.2 has been worked 1 time vertically work 2 ridges over the middle 9 sts mid front (work the other sts as before). On next row from RS after ridges, bind off the middle 3 sts for neck and finish each part separately. Continue in stockinette st with bind off for armhole as before and dec AT THE SAME TIME for V-neck on every other row (i.e. on every row from RS) as follows: Dec 1 st 13-13-14-14-15-15 times in total - READ DECREASE TIP.
After all bind offsfor armholes and V-neck, 16-16-16-17-17-18 sts remain on shoulder. Continue until piece measures 60-62-64-66-68-70 cm / 23 5/8''-24 3/8''-25¼''-26''-26¾''-27½'' and bind off. Repeat on the other shoulder - NOTE: Work first row from mid front (= WS). Beg by picking up 1 st in first st from the other side and work this tog with first st on needle. This is done to avoid a nick at the bottom of vent.

ASSEMBLY:
Sew shoulder seams inside bind-off edge. Sew side seams – sew edge to edge in outer loops of edge sts - beg at the top by armhole and sew until approx. 10 cm / 4'' remain in each side (= vent).

Diagram

All measurements in charts are in cm.

= K from RS, P from WS
= 1 YO between 2 sts
= K 2 tog
= slip 1 st as if to K, K 1, psso
= marker



Comments (7)

Leave your comment!

Monica 29.03.2018 - 07:48:

Salve vorrei sapere se continuare con le 2 m. di vivagno a legaccio per tutta la lunghezza del davanti e dietro, oppure se lavorarle solo per la parte dello spacco laterale che non viene cucito. Nel caso si debba fare x tutta la lunghezza, lasciare a vista il legaccio durante la cucitura? Grazie

DROPS Design 29.03.2018 kl. 09:34:

Buongiorno Monica, è tutto spiegato nel modello, si lavora dall'alto in basso con 2 o 3 maglie di vivagno a seconda delle spiegazioni. E anche per la confezione, deve seguire le indicazioni e cucire il lato nel filo più esterno delle maglie di vivagno, quindi le maglie di vivagno rimangono a vista. Buon lavoro!

Agnes 12.05.2017 - 14:01:

Bonjour, je tricote le dos et je ai terminé le diagramme A1. VOUS dites de faire les diagraMmes A1a et A1b à droite et à gauche . Je ne comprends pas où les commencer et comment faire la suite des motifs au milieu Merci de me répondre

DROPS Design 12.05.2017 kl. 15:38:

Bonjour Agnès, Quand A.1 est terminé 1 fois en hauteur, continuez A.1 comme avant, c'est-à-dire que vous aurez 5 motifs ajourés en largeur au prochain rang et ainsi de suite (6, 7 ... ) - en fonction de votre taille, vous devrez tricoter A.1A au début du rang et A.1B à la fin du rang (si vous n'avez pas suffisamment de mailles pour faire des motifs complets en largeur). Bon tricot!

Carolin 11.09.2016 - 15:23:

Hallo habe gerade mit dem Rückenteil angefangen und eine Frage zum Mister A1: In der Anleitung steht dass das Muster nach dem Markierer beginnt...heißt also dass ich den ersten Umschlag nach dem Markierer mache oder? Irgendetwas stimmt da bei mir aber nicht da ich irgendwann mit den Löchern nicht mehr symmetrisch bin und es kein Herz mehr ergibt?! Der Markierer sollte aber doch die ganze Zeit einfach nur mitgeführt werden oder?

DROPS Design 12.09.2016 kl. 09:23:

Liebe Carolin, ja genau, der 1. Umschlag muss gerade nach dem Markierer sein, und dann wie im Diagram weiterstricken. Siehe auch das Video zum Diagram (am 3. Reihe mit Herze bekommen Sie mehr Herzen als im Video, da Sie mehr Maschen haben).

Hilda 27.04.2016 - 12:45:

Prima uitleg met fantastisch resultaat. Heel mooi ! Nu nog het zonnetje...

Sibylle 11.04.2016 - 20:07:

Soll der Armausschnitt im Vorderteil nach 44 cm und im Rückenteil nach 47 cm angefangen werden?

DROPS Design 12.04.2016 kl. 14:19:

Liebe Sybille, herzlichen Dank für Ihre Rückmeldung. Da ist uns bei der deutschen Übersetzung ein Fehler passiert, wir werden uns sofort darum kümmern.

Maria 19.12.2015 - 12:23:

Elegante y sencillo. Pero me temo que como sea para circulares o de doble punta no podré ponerlo en práctica.

Maria 19.12.2015 - 11:25:

Precioso y elegante. Si es con dos agujas normales podré intentar hacerlo ,ahora bien si es con circulares o de doble punta será para mi imposible de hacer. Pero es elegante y muy bonito.

Post a comment to pattern DROPS 170-32

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.