DROPS / 166 / 21

Winter Flower by DROPS Design

Set consists of: Crochet DROPS beret and neck warmer with lace pattern in ”Lima”.

DROPS design: Pattern no li-061
Yarn group B
----------------------------------------------------------
BERET:
Size: S/M – L/XL
Head circumference: 54/56 - 56/58 cm / 21 1/4''/22'' - 22''/22 3/4''
Materials:
DROPS LIMA from Garnstudio
100 g for both sizes in color no 6235, gray blue

DROPS CROCHET Hook size 4 mm / G/6 – or size needed to get 18 dc x 9 rows = 4'' x 4'' (10 x 10 cm).

NECK WARMER:
Size: S/M – L/XL
Measurements: Circumference at the bottom: 80-86 cm / 31½"-34" Circumference at the top: 69-74 cm / 27"-29" Height: 40-42 cm / 15 3/4"-16½"
Materials:
DROPS LIMA from Garnstudio
200 g for both sizes in color no 6235, gray blue

DROPS CROCHET Hook size 5 mm / H/8 – or size needed to get 14 dc = 10 cm / 4'' in width.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (5)

65% Wool, 35% Alpaca
from 2.75 $ /50g
DROPS Lima uni colour DROPS Lima uni colour 2.75 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Lima mix DROPS Lima mix 2.85 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 11.00$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
See diagrams A.1 to A.3. Diagram A.2 shows how round beg and ends.

TR-GROUP:
1 tr in back loop of first/next dc but wait with last pull through, work 1 tr in each of the next 3 dc the same way, pull yarn through all 5 sts on hook

REVERSE CROCHET:
Work as sc but backwards. I.e. crochet around from left to right

CROCHET INFO:
Beg every round with dc with 3 ch (do not replace first dc) and finish with 1 sl st in 3rd ch at beg of round.
Beg every sc round with 1 ch (this does not replace first sc) and finish with 1 sl st in first ch from beg of round.

DECREASE TIP:
Dec 1 dc by working the next 2 dc tog as follows: Work 1 dc but wait with last pull through (= 2 sts on hook), then work next dc but on last pull through, pull yarn through all 3 sts on hook.

INCREASE TIP:
Inc 1 dc by working 2 dc in same dc.
----------------------------------------------------------

BERET:
The piece is worked top down. Work 4 ch on hook size 4 mm / G/6 with Lima and form a ring with 1 sl st in first ch. Then work A.1 as follows (repeat A.1 5 times in total on round):

ROUND 1: A.2 shows how round beg and ends - READ CROCHET INFO. Work 10 dc in ch-ring.
ROUND 2: Work 2 dc in back loop of every dc = 20 dc.
ROUND 3: Work * 2 dc in back loop of first dc, 1 dc in back loop of next dc *, repeat from *-* 10 times in total = 30 dc.
ROUND 4: Work * 1 dc in both loops in first dc, ch 1, 1 dc in both loops in same dc, ch 4, skip 2 dc, 1 sc in next dc, ch 4, skip 2 dc *, repeat from *-* 5 times in total.
ROUND 5: Work * 1 sc around ch (= ch between dc from previous round), ch 3, 1 sc around same ch, 8 ch, skip: 4 ch + 1 sc + 4 ch *, repeat from *-* 5 times in total.
ROUND 6: Work * 7 dc around first/next ch-space (= space with 3 ch), ch 4, 1 sc around next ch-space (= space with 8 ch), 4 ch *, repeat from *-* 5 times in total.
ROUND 7: Work * 1 sc in middle dc in dc-group (= 4th dc), ch 4, 7 dc in next sc, 4 ch *, repeat from *-* 5 times in total. REMEMBER THE CROCHET GAUGE!
ROUND 8: Work * 4 dc around ch-space, 1 dc in back loop of each of the 7 dc from dc-group, 4 dc around next ch-space *, repeat from *-* 5 times in total = 75 dc.
ROUND 9: On this round work all dc in back loop of dc from previous round: Work * 2 dc in first dc, 1 dc in each of the next 14 dc *, repeat from *-* 5 times in total = 80 dc.
ROUND 10: Work * 1 dc in both loops of first/next dc, ch 4, skip 3 dc *, repeat from *-* 20 times in total.
ROUND 11: Work * ch 1, 4 dc around first/next ch-space *, repeat from *-* 20 times in total = 80 dc and 20 ch.
ROUND 12: Work * ch 3, 1 TR-GROUP – see explanation above – over the next 4 dc, ch 6, 1 tr-group over the next 4 dc, ch 6, 1 tr-group over the next 4 dc, ch 6, 1 tr-group over the next 4 dc, 3 ch *, repeat from *-* 5 times in total = 20 tr-groups with 6 ch between each.
ROUND 13: Work 3 dc around first ch-space, 6 dc around each of the next 19 ch-space, 3 dc around last ch-space = 120 dc.

Then work piece with dc in back loop as follows:
ROUND 1: Work 1 dc in every dc.
ROUND 2: Work 1 dc in every dc AT THE SAME TIME dec 3 dc evenly READ DECREASE TIP = 117 dc.
ROUND 3: Work 1 dc in every dc but work every 12th and 13th dc tog = 108 dc.
ROUND 4: Work 1 dc in every dc but work every 11th and 12th dc tog = 99 dc.
ROUND 5: Work 1 dc in every dc AT THE SAME TIME dec 11-5 dc evenly = 88-94 dc.
ROUND 6-9: Work 1 dc in every dc.
ROUND 10: Work with a double thread. Work REVERSE CROCHET – see explanation above – the entire round. Fasten off.
----------------------------------------------------------

NECK WARMER:
Worked in the round from the middle of neck warmer and down with dc and A.3, then worked from ch-row and up with A.3.

Work 96-104 LOOSE ch on hook size 5 mm / H/8 with Lima and form a ring with 1 sl st in first ch. Work 3 ch – READ CROCHET INFO, 1 dc in every ch, finish with 1 sl st in 3rd ch on round = 96-104 dc. Work 1 dc in back loop of every dc. When piece measures 7 cm / 2¾'', inc 8 dc evenly - READ INCREASE TIP = 104-112 dc. Repeat inc when piece measures 10-12 cm / 4"-4 3/4" = 112-120 dc. REMEMBER THE CROCHET GAUGE! Continue with 1 dc in back loop of every dc until piece measures 14-16 cm / 5½"-6 1/4''.

Then work A.3 as follows:
ROUND 1: A.2 shows how round beg and ends. Work * 1 dc in both loops in first/next dc, ch 4, skip 3 ch *, repeat from *-* the entire round (= 28-30 times in total).
ROUND 2: Work 4 dc in every ch-space = 112-120 dc.
ROUND 3: Work * ch 2, 1 TR-GROUP – see explanation above – over the next 4 dc, ch 4, 1 tr-group over the next 4 dc, 2 ch *, repeat from *-* the entire round (= 14-15 times in total) = 28-30 tr-groups.
ROUND 4: Work 2 dc around first ch-space, 4 dc around every ch-space until 1 ch-space remains, 2 dc around last ch-space = 112-120 dc.
ROUND 5: Work 1 dc in back loop of every dc = 112-120 dc.
ROUND 6: Work * 1 dc in back loop of first/next dc, ch 1, skip 1 dc *, repeat from *-* the entire round = 56-60 dc and 56-60 ch.
ROUND 7: Work 1 dc in back loop of every dc and 1 dc around every ch = 112-120 dc.
ROUND 8: Work * 1 dc in both loops of first/next dc, ch 3, skip 3 dc *, repeat from *-* the entire round (= 28-30 times in total).
ROUND 9: Work * 1 sc in first/next dc, 5 dc in middle ch in ch-space *, repeat from *-* the entire round (= 28-30 times in total). Fasten off.

Then work A.3 in ch-ring (= 96-104 ch) in opposite direction as follows:
ROUND 1: Work * 1 dc in both loops of first/next, ch 4, skip 3 ch *, repeat from *-* the entire round (= 24-26 times in total).
ROUND 2: Work 4 dc in every ch-space = 96-104 dc.
ROUND 3: Work * ch 2, 1 tr-group over the next 4 dc, ch 4, 1 tr-group over the next 4 dc, 2 ch *, repeat from *-* the entire round (= 12-13 times in total) = 24-26 tr-groups.
ROUND 4: Work 2 dc around first ch, 4 dc around every ch-space until 1 ch-space remains, 2 dc around last ch-space = 96-104 dc.
ROUND 5: Work 1 dc in back loop of every dc = 96-104 dc.
ROUND 6: Work * 1 dc in back loop of first/next dc, ch 1, skip 1 dc *, repeat from *-* the entire round = 48-52 dc and 48-52 ch.
ROUND 7: Work 1 dc in back loop of every dc and 1 dc around every ch = 96-104 dc.
ROUND 8: Work * 1 dc in both loops of first/next dc, ch 3, skip 3 dc *, repeat from *-* the entire round (= 24-26 times in total).
ROUND 9: Work * 1 sc in first/next dc, 5 dc in middle ch in ch-space *, repeat from *-* the entire round (= 24-26 times in total). Fasten off.

Diagram

All measurements in charts are in cm.

= ch
= sc in dc
= sc in middle dc
= sc around ch-space
= dc in back loop of st
= dc around ch-space/ring
= dc in both loops
= beg round with 3 ch and finish with 1 sl st in 3rd ch
= beg round with 1 ch and finish with 1 sl st in first ch
= 1 sc around ch, ch 3, 1 sc around same ch
= 7 dc around ch-space
= 7 dc in sc
= work 1 tr in back loop of st but wait with last pull through (= 2 sts on hook), work 1 tr in each of the next 3 sts the same way, pull yarn through all 5 sts on hook
= beg round with 4 ch and finish with 1 sl st in 4th ch
= ch 4, 1 sl st in first ch
= first round is explained in pattern
= 5 dc in middle ch


Comments (5)

Leave your comment!

Denise 12.11.2016 - 22:04:

Hello Drops! Thank you for your truly beautiful designs. My question is about row 12 for the beret. Is it possible that we should end up with = 25 tr-groups since we start with 100 stitches and TR-groups have 4 stitches? I have the right amount of stitches in previous rows. Should the round be something like: Work ch 3, *1 tr-group over the next 4 dc, ch 6* repeat from * to * for a total of 25 tr-groups with 6 ch between each? Best regards from Vancouver Island, Canada!

DROPS Design 14.11.2016 kl. 10:09:

Dear Denise, at the end of round 10 you should have 20 ch-spaces with each 4 ch. On round 11 you will crochet 4 dc in each of this ch-spaces, you will have then (4 dc, 1 ch) a total of 20 times. On round 12 you will crochet 1 dtr-group over each of these (each dtr-group is worked over the 4 dc from previous row), you will have then 20 dtr-groups. See also diagram A.1 (= worked a total of 5 times in the round). Happy crocheting!

Redhead 21.12.2015 - 10:53:

I'm new to crotcheting and I'm not sure how to work with a double thread? Do I have to cut the yarn and double it up?

DROPS Design 21.12.2015 kl. 11:57:

Dear Redhead, you have to work this round with 2 strands of yarn held tog as just one. You can use the other end of ball to work at the same time with both yarn from inside and from outside the ball (or with another ball). Happy crocheting!

Isabelle Jannel 26.08.2015 - 00:05:

Je l ai fais, combien dois t il mesurer en diametre avant de faire les brides Je le trouvevun peu large j ai du finir avec des ms Cordialement isa

DROPS Design 26.08.2015 kl. 10:28:

Bonjour Mme Jannel, le béret est adapté pour un tour de tête de 54/56 et de 56/58 cm, pour un tour de tête plus petit, vous pouvez diminuer davantage pour ajuster à la taille souhaitée. Bon crochet!

Bigras Claudette 27.05.2015 - 22:50:

Ce modèle est très élégant et féminin. J'aime bien les ajourés.

Marie 27.05.2015 - 19:03:

Romantique à souhait !

Post a comment to pattern DROPS 166-21

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.