DROPS Paris
DROPS Paris
100% Cotton
from 1.60 $ /50g
Get the yarn to make this pattern from 8.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

Blueberry Picking

Crocheted hat in DROPS Paris. The piece is worked in the round, top down and with stripes. Sizes S-XL.

DROPS 221-42
DROPS Design: Pattern no w-826
Yarn group C or A + A
-------------------------------------------------------

SIZES: S/M - L/XL
Fits head size: 54/56 - 58/60 cm = 21¼"/22" – 22¾"/23⅝"

MATERIALS:
DROPS PARIS from Garnstudio (belongs to yarn group C)
50-50 g color 29, ice blue
50-50 g color 17, off white
50-50 g color 102, spray blue
50-50 g color 26, beige
50-50 g color 62, sage green

CROCHET GAUGE:
16 single crochets in width and 18 rows in height = 10 cm = 4" x 4".
CROCHET HOOK:
DROPS CROCHET HOOK SIZE 4.5 MM = US 7.
Hook size is only a guide. If you get too many stitches on 10 cm = 4", change to a larger hook size. If you get too few stitches on 10 cm = 4", change to a smaller hook size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Paris
DROPS Paris
100% Cotton
from 1.60 $ /50g
Get the yarn to make this pattern from 8.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

CROCHET INFORMATION:
The first single crochet on the round is replaced by 1 chain stitch. The round finishes with 1 slip stitch in the first chain stitch at the beginning of the round. When changing colors on the next round, it is a good idea to change the strand before working the last slip stitch – the stripes will then be neater. NOTE! Do not cut the strand after changing colors, but allow it to follow your work onwards on the inside of the hat.

STRIPES:
The chain-stitch ring and round 1 are worked with ice blue, then stripes are worked as follows: * 1 round ice blue, 1 round spray blue, 1 round beige, 1 round off-white, 1 round sage green, 2 rounds off-white *, work from *-* onwards.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

HAT:
Work 4 chain stitches with hook size 4.5 MM = US 7 and ice blue and form them into a ring with 1 slip stitch in the first chain stitch. Read CROCHET INFORMATION.
ROUND 1: Work 6 single crochets around the ring with ice blue.
Now work STRIPES – read description above.
ROUND 2: Work 2 single crochets in each single crochet = 12 stitches.
ROUND 3: * 1 single crochet in the first/next stitch, 2 single crochets in the next stitch *, work from *-* to end of round = 18 stitches.
ROUND 4: * 1 single crochet in each of the first/next 2 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 24 stitches.
ROUND 5: * 1 single crochet in each of the first/next 3 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 30 stitches.
ROUND 6: * 1 single crochet in each of the first/next 4 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 36 stitches.
ROUND 7: * 1 single crochet in each of the first/next 5 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 42 stitches.
ROUND 8: * 1 single crochet in each of the first/next 6 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 48 stitches.
ROUND 9: * 1 single crochet in each of the first/next 7 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 54 stitches.
ROUND 10: * 1 single crochet in each of the first/next 8 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 60 stitches.
ROUND 11: * 1 single crochet in each of the first/next 9 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 66 stitches.
ROUND 12: * 1 single crochet in each of the first/next 10 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 72 stitches.
ROUND 13: * 1 single crochet in each of the first/next 11 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 78 stitches.
ROUND 14: * 1 single crochet in each of the first/next 12 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 84 stitches.

The increases are finished in size S/M.

SIZE L/XL:
ROUND 15: * 1 single crochet in each of the first/next 13 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 90 stitches.

ALL SIZES:
Continue with stripes but without further increases until the piece measures approx. 17-19 cm = 6¾"-7½". Now work a brim with ice blue; the other strands are cut.

BRIM:
Change to ice blue and work as follows:
ROUND 1: Work 1 single crochet in each stitch to end of round = 84-90 stitches.
ROUND 2: * 1 single crochet in each of the first/next 13-14 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 90-96 stitches.
ROUND 3: Work 1 single crochet in each stitch to end of round.
ROUND 4: * 1 single crochet in each of the first/next 14-15 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 96-102 stitches.
ROUND 5: Work 1 single crochet in each stitch to end of round.
ROUND 6: * 1 single crochet in each of the first/next 15-16 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 102-108 stitches.
ROUND 7: Work 1 single crochet in each stitch to end of round.
ROUND 8: * 1 single crochet in each of the first/next 16-17 stitches, 2 single crochets in the next stitch *, work from *-* to end of round = 108-114 stitches.
ROUND 9: Work 1 single crochet in each stitch to end of round. Cut the strand and change to off white.
ROUND 10: Work 1 single crochet in each stitch to end of round.
Cut and fasten the strand.
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.  

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 221-42

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (14)

country flag Rosella wrote:

Vorrei, gentilmente vedere un video x cambio colore su un lavoro in tondo a maglia bassa uncinetto. Ho visto solo con maglie alte. Grazie. Vorrei anche sapere perché sulle risposte che trovo nelle faq non si può avere la traduzione in italiano.grazie. Saluti

27.05.2024 - 09:12

DROPS Design answered:

Buonasera Rosella, il suggerimento può essere quello di cambiare colore prima dell'ultima maglia. Purtroppo non ci è possibile tradurre tutti i commenti nelle diverse lingue, ma può aiutarsi con un traduttore online. Buon lavoro!

30.05.2024 - 20:12

country flag Magda wrote:

Dzień dobry, we wskazówkach radzicie żeby nie odcinać nitek tylko przesuwać je po lewej stronie. Co to znaczy? Na filmiku końcówka poprzedniego koloru jest wrabiana jakby pod ściegiem. Czy to o to chodzi? Chyba nie - przy 5 kolorach byłoby to strasznie grube. Czy po prostu zostawiać nitki na wysokości początku rzędu i sięgać po nie gdy przychodzi kolej na dany kolor? Pozdrawiam

28.06.2023 - 17:12

DROPS Design answered:

Witaj Magdo, należy zostawiać nitki na wysokości początku rzędu i sięgać po nie gdy przychodzi kolej na dany kolor. Pozdrawiamy!

28.06.2023 - 17:24

country flag Aranzazu wrote:

Hola, Cuando el patron dice tejer sin aumento hasta 17-19 cm, se mide de lado a lado? O desde el centro. Gracias,

08.06.2023 - 00:22

country flag Véronique Thulliez wrote:

Bonjour Le cercle doit être de combien de cm après les augmentations ? Après le rang 14 pour une taille M. Merci

06.05.2023 - 07:48

DROPS Design answered:

Bonjour Mme Thulliez, si votre échantillon est juste (18 rangs de mailles serrées = 10 cm), les 14 premiers rangs vont mesurer environ 8 cm, vous aurez donc environ 16 cm de diamètre. Bon crochet!

08.05.2023 - 07:42

country flag Gunilla Kristiansson wrote:

Om jag vill virka den här hatten utan ränder, i ett och samma garn - vilken är då den totala garnåtgången?

09.08.2022 - 21:34

DROPS Design answered:

Hej Gunilla, du skal da regne med 150 gram :)

10.08.2022 - 07:31

country flag Monica Lindberg wrote:

Om mönster 22142 virkad hatt , ska det i stl l mätas 19 cm från virkningens mitt start? Eller från den raden där man uppnått 90 m i ett varv?

30.08.2021 - 15:50

DROPS Design answered:

Hei Monica. Det måles fra starten (der du heklet de 4 luftmaskene og satte de sammen til en ring). mvh DROPS design

06.09.2021 - 11:33

country flag Leonie wrote:

Hallo, ich häkele leider mit einer anderen Garndicke (3,5 - 4). Wie groß (in cm) muss der Hut sein bevor ich in die Länge arbeite? Vielen Dank vorab. Liebe Grüße, Leonie

24.07.2021 - 18:48

DROPS Design answered:

Liebe Leonie, die 14-15 Runden sollen ca 8 cm messen und die 84-90 Maschen sind ca 53-56 cm. Viel Spaß beim häkeln!

26.07.2021 - 08:36

country flag Anabella wrote:

Buongiorno, vorrei fare una domanda sul modello: quando il lavoro dice di lavorare a maglie basse senza aumenti per 17-19cm, la misura parte dal centro cioè dall'inizio del lavoro o da quando non si fanno più gli aumenti? Grazie

30.06.2021 - 12:57

DROPS Design answered:

Buongiorno Anabella, il testo riporta "fino a quando il lavoro misura 17-19 cm", per cui in questo caso si intende dall'inizio del lavoro. Buon lavoro!

01.07.2021 - 08:44

country flag Micheline wrote:

Bonjour, Est-ce que l'on doit terminer chaque rang par une maille coulée dans la première maille en l'air du début du tour? Je vous remercie.

29.06.2021 - 20:26

DROPS Design answered:

Bonjour Micheline, tout à fait - cf INFO CROCHET. Bonne continuation!

30.06.2021 - 07:10

country flag Henriette Moldt wrote:

Jeg har lidt problemer med at afslutte og begynde omgangene. Jeg synes jeg gør som der står med at starte med en luftmaske i stedet for den 1. fastmaske, og jeg afslutter med en kædemaske. Men jeg får ligesom en snoning ned gennem hatten i skiftet. Tænker den bør være lige, om ikke usynlig? Man kan desværre ikke vedhæfte billede. Noget bud på, hvad jeg gør forkert?

26.06.2021 - 20:21

DROPS Design answered:

Hei Henriette. Ta en titt på denne videoen: Hækl rundt med fastm Her bruker vi et tykt garn slik at man bedre ser maskene. Her kan du se om det ligner ditt arbeid og om du gjør du det på samme måte. mvh DROPS design

28.06.2021 - 14:08