Maurer wrote:
Bei mir wellt sich die letzte Reihe am Volantrand. Maschenprobe war gut. Ich habe den ganzen Volantrand schon mit einer kleineren Nadel gehäkelt, immer noch wellig. Auch habe ich die Picots mit festen Maschen gearbeitet - auch wellig. Können Sie mir bitte helfen? Was mache ich falsch? Vielen Dank.
01.06.2022 - 10:49DROPS Design answered:
Liebe Frau Maurer, bei der 5. Runde, beachten Sie, daß Sie 8 Lm nur in jede 2. Lm häkeln, dh, es ist abwechslungsweise *1 LmBogen mit 8 Lm, 1 LmBogen mit nur 1 Lm* und dazwischen immer 1 M in jedem LmBogen. Dann wird Sie die 4. Runde auch etwas wellen, aber es sollte auch nicht zu wellig sein. Vielleicht können Sie auch mal Ihr DROPS Laden zeigen (auch ein Foto per mail senden), so kann man Ihnen am besten weiterhelfen. Viel Spaß beim häkeln!
01.06.2022 - 13:33Barbora wrote:
Hi, I don 't understand the begining of the Pattern. I made 113ch, than 1cs in 2nd, than one more sc. but than I don't know 🤦♀️ what mean next 3-1-4ch? thanks
23.06.2021 - 16:05DROPS Design answered:
Dear Barbora, it means you have now to work 1 sc in each of the next 3 chains in the first size, in the next chain in the 2nd size and in the next 4 chains in the last size. Each number refers to the size. Since the fundation chain is most often quite tight, you cast on more stitches and then you will skip chains evenly on very first row. Happy crocheting!
23.06.2021 - 16:10Roswitha Rudolph wrote:
Betreff: bolero CAROLINE Siehe schreiben beim volant häkeln 3 luftmaschen UM die vorhergehende luftmasche herum einstechen , das verstehe ich nicht, ist auch nicht logisch für mich
24.04.2020 - 08:37DROPS Design answered:
Liebe Frau Rudolph, es wird bei der 3. Runde 1 fM um den nächsten Lm-bogen - dieses Video zeigt (mit einem anderen Diagram), wie man in oder um die Maschen häkelt. Viel Spaß beim häkeln!
24.04.2020 - 09:39Tone Frank Stubberud wrote:
Jeg har nå printet ut denne oppskriften, men diagram A1 og diagram A2 er ikke med i oppskriften. Blir ingen bolero uten diagrammene, håper de blir lagt inn på oppskriften.
26.03.2020 - 13:25DROPS Design answered:
Hej Diagrammen finns längst ner på oppskriften så de ska komma med på utskriften. Kan det vara någon inställning på din printer som gör att de inte kommer med? Jag får med de när jag provar här.. Mvh DROPS Design
26.03.2020 - 14:02Linda wrote:
I have been crocheting for 65 years so I hope that you will consider my suggestion. I am working on this pattern now and find it very easy to use, but I wonder why you do not begin the project with foundation single crochet, rather than including extra chains which you then skip in the following row of single crochet. The obvious purpose is to avoid having the chain too tight, but foundation single crochet has much more stretch than a chain, and gives a nicer-looking result.
30.01.2020 - 08:13Donna Louk wrote:
In first row does skip ch1 mean skip 1 ch or ch 1 and skip 1 ch?
13.05.2019 - 03:17DROPS Design answered:
Dear Mrs Louk, you will skip 1 chain and crochet 1 dc in each of the next 5 chains (= 5 double crochets worked over 6 chains between stars). Read more here. Happy crocheting!
13.05.2019 - 10:28Mari wrote:
Hi, I'm confused as to how to start the other SECOND SIDE of the vest. The instructions don't seem to tell me to do anything different. Do I crochet it exactly the same? If I do, won't one half be in reverse stitch? Please help out.
03.08.2018 - 08:00DROPS Design answered:
Dear Mari, 2nd side starts with 1 row with dc (UK-terminology)/sc (US-terminology), then work as first side, ie repeat A.1 and finish with A.2. Happy crocheting!
03.08.2018 - 08:26Natasja wrote:
Hi there. Im wondering if im wrong, but the pattern says to crochet tr. so i do, but i think i just realized that is not tr that i should crochet, but dc ? I can read this pattern in different languages, and in danish it says that i need to crochet this in dc ? And now im confused, should this be crochet in tr. or dc ? Cause i just crochet 33 cm in tr.
28.11.2017 - 23:04DROPS Design answered:
Dear Natasja, US and UK crochet terminology are different, make sure you are selecting the correct language you are used to. Read more here. Happy crocheting!
29.11.2017 - 09:17Betina Ellegaard wrote:
Hej Jeg er igang med denne skønne bolero. Jeg er dog nybegynder i at hækle. Mit spørgsmål lyder på indtagningen i hver side af arbejdet. Hvordan laver man indtagningen der hvor der er 2 luft masker i mønstret, altså der hvor hullerne er i mønstret. et sted er det st m og 2 lm og det gentager sig, hvordan laver jeg så indtagningen der? På forhånd tak Kærlig hilsen Betina Ellegaard
18.08.2017 - 21:42DROPS Design answered:
Hej Betina, dem tager du ind på samme måde ved at hækle 2 st sammen. Husk at når der ikke er nok masker til en rapport, så hækles der st over de yderste masker. God fornøjelse!
21.08.2017 - 11:11
Caroline |
|||||||||||||
|
|
||||||||||||
Crochet DROPS bolero with lace pattern in ”BabyAlpaca Silk”. Size: S - XXXL
DROPS 147-4 |
|||||||||||||
CROCHET INFO: Replace first dc on every row with 3 ch. PATTERN: See diagrams A.1 and A.2 - NOTE: The first row with sc is not in the repetition and is not repeated upwards. DECREASE TIP: Crochet 2 dc tog as follows: Work 1 dc in first st but wait with last pull through, work 1 dc in next st but on last pull through, pull thread through all 3 loops on hook. -------------------------------------------------------- BOLERO: Worked from mid back. First work one side and down to beg of sleeve, then work the other side and down to the other sleeve. Then sew the sleeve seams and work 1 flounce around the entire opening. FIRST SIDE: Ch 113-135-156 with Baby Alpaca Silk on hook size 3 mm / C. Turn and work 1 sc in 2nd ch from hook, continue with 1 sc in each of the next 3-1-4 ch, * skip ch 1, 1 sc in each of the next 5 ch *, repeat from *-* the entire row = 94-112-130 sc (first ch on row is NOT counted as one sc). Continue with diagram A.1 over the first 90-108-126 sc and diagram A.2 over the last 4 sc – READ CROCHET TIP! Repeat pattern until finished measurements. AT THE SAME TIME when piece measures 27-30-33 cm / 10½"-11 3/4"-13", insert 1 marker in the side (this marks how far up to sew the sleeve seam afterwards). On next row dec 1 dc each side by working 2nd and 3rd dc and the 2 next to last dc tog – SEE DECREASE TIP! Repeat dec on every row a total of 16-20-24 times = 62-72-82 sts remain - NOTE: When dec work only dc over the sts that do not fit the pattern. Continue with pattern until piece measures approx. 47-50-53 cm / 18½"-19 3/4"-21" in total – finish after a row with only dc, cut the thread. SECOND SIDE: Work 1 sc in each of the 94-112-130 sc worked on 1st row on first side (i.e. mid back). Then work pattern as on first side. Make sure to finish on same row in diagram at the bottom of sleeve in both sides. ASSEMBLY: Fold the bolero double across and sew tog from bottom of each sleeve and up to where marker was inserted in each side – sew edge to edge to avoid a chunky seam. FLOUNCE AROUND OPENING: Work around the entire opening as follows (beg mid back): ROUND 1: 1 sl st in first st, * ch 3, 1 sc in next dc *, repeat from *-* the entire round and finish with 3 ch and 1 sl st in sl st from beg of round - NOTE: make sure that an even number of ch-spaces has been worked otherwise 5th round will not fit. ROUND 2: Work 1 sl st and 1 sc in first ch-space, * ch 3, 1 sc in next ch-space *, repeat from *-* the entire round, finish with 1 sl st in first sc from beg of round. Round 3 and 4: Work as 2nd round. ROUND 5: Work 1 sl st and 1 sc in first ch-space, * 8 ch, 1 sc in next ch-space, ch 1, 1 sc in next ch-space *, repeat from *-* the entire round, finish with 1 sl st in first sc from beg of round. ROUND 6: 1 ch, 1 sc in first large ch-space, [* ch 4, 1 dc in the first ch made (= 1 picot), 1 sc in same ch-space *, repeat from *-* 2 more times (i.e. so that there are 3 picots in the large ch-space), 1 sc in the small ch-space (the one with only 1 ch between the large ch-spaces), 1 sc in next large ch-space], repeat from [-] the entire round, instead of last sc, work 1 sl st in first sc on round. Cut and fasten the thread. FLOUNCE AT THE BOTTOM OF SLEEVE: Work a shorter edge at the bottom of sleeve, only work 1st, 5th and 6th round of the flounce around the opening – NOTE: On 1st round skip 1 dc between every ch-space. |
|||||||||||||
Diagram explanations |
|||||||||||||
|
|||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Majbrit wrote:
Kan ikke bruge jeres opskrifter da de med diagram. Søger at der laves opskrifter der bliver beskrevet trin for trin/række for række istedet. Denne opskrift har jeg givet op på.
23.09.2022 - 00:00