Hot Heart by DROPS Design
Knitted and felted trivet in DROPS Snow. The piece is worked with bobbles and heart. Theme: Christmas.
Yarn group E or C + C
-----------------------------------------------------------
SIZES:
Measurements before felting: approx. 28 x 32 cm = 11” x 12 1/2”.
Measurements after felting: approx. 18 x 18 cm = 7” x 7”.
MATERIALS:
DROPS SNOW from Garnstudio (belongs to yarn group E)
150 g color 46, medium grey
50 g color 56, christmas red
KNITTING GAUGE:
11 stitches in width and 15 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4” before felting.
NEEDLES:
DROPS NEEDLES SIZE 8 MM = US 11.
The needle size is only a guide. If you have too many stitches on 10 cm = 4”, change to a larger needle size. If you have too few stitches on 10 cm = 4”, change to a smaller needle size.
Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!
|
DROPS Snow 100% Wool |
from 2.85 $ /50g | Order | ||||||||||||
|
|||||||||||||||
|
DROPS Needles & Hooks | ||||||||||||||
You might also like...
NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------
RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.
PATTERN:
See diagram A.1. The diagram shows all rows in the pattern seen from the right side.
KNITTING TIP:
Make sure that the strand is not tight on the rows with the christmas red bobbles. You can cut and re-fasten the strand between each bobble if necessary. Between each row in height, the strand of christmas red needs to be cut and re-fastened after each row.
-------------------------------------------------------
START THE PIECE HERE:
-------------------------------------------------------
TRIVET - SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth.
TRIVET:
Cast on 31 stitches with needle size 8 mm = US 11 and medium grey. Knit 3 rows (first row is from the wrong side). Then work as follows - from the right side: Work 2 stitches in GARTER STITCH – read description above, A.1 (= 27 stitches) and 2 stitches in garter stitch – read KNITTING TIP! When the diagram has been completed knit 3 rows. Bind off with knit on the next row.
FELTING:
Place the trivet in the washing machine; use a detergent without enzymes and optic bleaches and wash together with a towel. Wash at 40 degrees with normal centrifuge and no pre-wash. After washing, shape the trivet while it is still wet. Later washes are as for a normal wool garment.
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
= knit from right side, purl from wrong side (worked with medium grey)
= BOBBLE WITH MEDIUM GREY: Work 5 stitches in 1 stitch as follows: Knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, work 6 rows stockinette stitch back and forth over these 5 stitches. Then decrease as follows: Pass the 2nd stitch on the right needle over the first stitch, then pass the 3rd stitch on the right needle over the first stitch, then the 4th stitch over the first stitch and finally the 5th stitch over the first stitch = 1 stitch on needle.
= BOBBLE WITH CHRISTMAS RED: Work 5 stitches in 1 stitch as follows: Knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, work 6 rows stockinette stitch back and forth over these 5 stitches. Then decrease as follows: Pass the 2nd stitch on the right needle over the first stitch, then pass the 3rd stitch on the right needle over the first stitch, then the 4th stitch over the first stitch and finally the 5th stitch over the first stitch = 1 stitch on needle.
Diagram
All measurements in charts are in cm.
|
= knit from right side, purl from wrong side (worked with medium grey) |
|
= BOBBLE WITH MEDIUM GREY: Work 5 stitches in 1 stitch as follows: Knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, work 6 rows stocking stitch back and forth over these 5 stitches. Then decrease as follows: Pass the 2nd stitch on the right needle over the first stitch, then pass the 3rd stitch on the right needle over the first stitch, then the 4th stitch over the first stitch and finally the 5th stitch over the first stitch = 1 stitch on needle. |
|
= BOBBLE WITH CHRISTMAS RED: Work 5 stitches in 1 stitch as follows: Knit 1, 1 yarn over, knit 1, 1 yarn over, knit 1, work 6 rows stocking stitch back and forth over these 5 stitches. Then decrease as follows: Pass the 2nd stitch on the right needle over the first stitch, then pass the 3rd stitch on the right needle over the first stitch, then the 4th stitch over the first stitch and finally the 5th stitch over the first stitch = 1 stitch on needle. |
Do you need help with this pattern?
Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS Extra 0-1431) for measurements and calculations.
Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.
1) Why is the knitting/crochet tension so important?
Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.
The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.
The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.
See DROPS lesson: How to measure your tension/gauge
See DROPS video: How to make a gauge tension swatch
All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.
3) Can I use a different yarn than what the pattern suggests?
The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.
Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.
See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?
4) How do I use the yarn converter?
At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).
If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.
5) Why do I get the wrong knitting tension with the suggested needle size?
The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.
Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.
See DROPS lesson: How to measure your tension/gauge
See DROPS video: How to make a gauge tension swatch
6) Why is the pattern worked top-down?
Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.
The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.
Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.
9) How do I work according to a knitting diagram?
The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.
When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.
When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.
See DROPS lesson: How to read knitting diagrams
10) How do I work according to a crochet diagram?
The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.
When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.
When working in the round, every row in the diagram are worked from the right side, from right to left.
When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.
The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.
See DROPS lesson: How to read crochet diagrams
11) How do I work several diagrams simultaneously on the same row/round?
Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.
The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.
See DROPS lesson: How to read knitting diagrams
See DROPS lesson: How to read crochet diagrams
12) Why does the piece start with more chain stitches than it’s worked with?
Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.
14) Why increase in the cast-off edge?
It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.
See DROPS video: How to bind off with yarn overs (yo)
15) How do I increase/decrease on every 3rd and 4th row/round alternately?
To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.
See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately
16) Why is the pattern slightly different than what I see in the photo?
Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.
Make sure to follow instructions and diagrams for your size!
17) How can I work a jacket in the round instead of back and forth?
Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.
See DROPS video: How to knit steeks and cut open
18) Can I work a jumper back and forth instead of in the round?
Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.
See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?
19) Why do you show discontinued yarns in the patterns?
Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.
It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.
The yarn converter will provide both alternative yarn as well as required amount in the new quality.
20) How do I make a women’s size garment into a men’s size one?
If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.
Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.
21) How do I prevent a hairy garment from shedding?
All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.
Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding
Below are some tips on how to get the best result when working with hairier yarns:
1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.
2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.
3. Leave in the freezer for a few hours before taking it out and shaking it again.
4. Wash the garment according to the instructions on the yarn label.
22) Where on the garment is the length measured?
The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.
See DROPS lesson: How to read a schematic drawing
23) How do I know how many balls of yarn I need?
The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.
Comments / Questions (11)
What can you do with our patterns? You can share DROPS patterns online, using the pattern original picture, materials, name and number. But you are NOT ALLOWED to reproduce the complete pattern digitally in any way. Yarn stores are welcome to use the DROPS pattern database to promote the sale of our assortment. You can print out our patterns, make as many copies as you’d like. The only thing we ask is that you don't make any changes / additions to the original printed document. And that the patterns according to the DROPS philosophy are given out to the consumers for free. Editorials that wish to publish our patterns in printed books or magazines can contact us for more information. The sale of garments based on DROPS patterns is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of clothing labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”. The use of DROPS photos for marketing purposes/sales is only permitted in connection with the use/sale of DROPS products. The photos may not be cut or edited and the logo should be clearly visible.
We reserve the right to withdraw the permission for use of our patterns at any time, notwithstanding the reason.
With over 30 years in knitting and crochet design, DROPS Design offers one of the most extensive collections of free patterns on the internet - translated to 17 languages. As of today we count 267 catalogs and 9903 patterns - 9461 of which are translated into English (US/in).
We work hard to bring you the best knitting and crochet have to offer, inspiration and advice as well as great quality yarns at incredible prices! Would you like to use our patterns for other than personal use? You can read what you are allowed to do in the Copyright text at the bottom of all our patterns. Happy crafting!
J'aimerais que vous affichiez les langues anglaise et française pour le Canada. Merci
Hei! Korleis fester ein dei raude trådene på baksida? Når eg ser på biletet skjønner eg ikkje korleis ein har gjort det utan at det er synleg. Skal ein sy trådene loddrette? No klipper eg tråden etter kvar raude boble, men vil gjerne vite korleis eg skal feste dei.
DROPS Design
24.08.2020 kl. 13:07:
Hei Dina. Om du klipper tråden etter hver boble kan du feste trådene inni boblen. De behøver ikke å festes så godt da gryteunderlaget skal toves og da festes trådene godt i hverandre. Hvis ikke, kan de festes slik at det blir "rette" tråder på baksiden. God Fornøyelse!Må man klippe av den røde tråden for hver omgang man er ferdig med å lage røde bobler?
DROPS Design
14.07.2020 kl. 06:55:
Hei Brit. Dette står under strikketips i oppskriften: STRIKKETIPS: Pass på at tråden ikke blir for stram på pinnene med de julerøde boblene. Tråden kan eventuelt klippes og festes mellom hver boble. Mellom hver pinne i høyden må den julerøde tråden klippes og festes etter hver rad. mvh DROPS designKan bordskånerne tåle varme gryder- og skåner de bordet for de varme gryder?
DROPS Design
10.02.2020 kl. 08:50:
Hej Mette, Ja :)Ik snap het telpatroon niet helemaal: moet je na de 3 naalden ribbelsteek dus nog eerst even 4 naalden in tricotsteek breien voordat je met de bobbels begint? En tussen de naalden met bobbels ook weer telkens 3 naalden tricotsteek?
Dag Ingrid,
Alle steken en naalden staan aangegeven in het telpatroon, dus eerste 4 naalden geen ribbelsteek, maar tricotsteek (recht aan de goede kant, averecht aan de verkeerde kant). Tussen de bobbels inderdaad ook weer 4 naalden tricotsteek.
Ved toving, blir det best resultat å ta en om gangen, eller kan man tove flere gryteunderlag sammen og få samme fine resultat?
DROPS Design
11.05.2019 kl. 11:38:
Hei Anne-Karin, Du kan gjerne ta flere om gangen. God fornøyelse!Sånn jeg leser oppskriften skal jeg strikke 3 omganger(det er tre ruter i mønsteret sett forfra) mellom boblerekkene. På bildet før toving ser dette mye tettere ut enn hos meg. Noe jeg gjør feil? Blir veldig langstrakt...
DROPS Design
04.03.2019 kl. 11:07:
Hei Wenche. Det stemmer at det er 3 pinner mellom hver pinne med bobler, så hvis du har det strikker du riktig. Kan det være strikkefastheten din er noe løsere enn i oppskriften? Målene på underlaget før toving skal være: ca 28 x 32 cm. God fornøyelseHva menes med å strikke første pinne «rett fra vrangen»? Skal man strikke vrang på retten eller starte på et nytt nøste fra vrangsiden?
DROPS Design
11.02.2019 kl. 11:36:
Hei Hanna. Jeg kan ikke se noe sted det står du skal strikke 1 pinne rett fra vrangen. Men hvis det hadde stått det skulle du da ha strikket alle masker rett, slik at maskene blir vrang fra rettsiden. Det som står er: strikk 3 pinner rett, da skal det strikkes i riller. Altså alle 3 pinnene strikkes rett, uavhengig av om de er fra retten eller vrangen.Det at 1 pinne = vrangen er kun til info for deg. 4 pinne, der du begynner med diagram strikkes da fra rettsiden. God fornøyelseIk snap het telpatroon niet helemaal: moet je na de 3 naalden ribbelsteek dus nog eerst even 4 naalden in tricotsteek breien voordat je met de bobbels begint? En tussen de naalden met bobbels ook weer telkens 3 naalden tricotsteek?
Jeg får ikke opp bilde av diagrammet. Noe dere kan se på?
DROPS Design
10.12.2018 kl. 09:45:
Hej Ina, jo diagrammet ligger nederst i opskriften. God fornøjelse!