DROPS / 177 / 11

Skipper by DROPS Design

Knitted jumper with cables and raglan in DROPS Belle. Sizes S - XXXL.

  • Skipper / DROPS 177-11 - Knitted jumper with cables and raglan in DROPS Belle. Sizes S - XXXL.
  • Skipper / DROPS 177-11 - Knitted jumper with cables and raglan in DROPS Belle. Sizes S - XXXL.
DROPS Design: Pattern no. vs-032
Yarn group B
----------------------------------------------------------
Sizes: S - M - L - XL - XXL - XXXL
Materials:
DROPS BELLE from Garnstudio (belongs to yarn group B)
450-500-500-550-650-700 g colour 01, white

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 + 60 or 80 cm) SIZE 4 MM – or the size needed to get 21 stitches and 28 rows stocking stitch on 10 cm in width and 10 cm in height.
DROPS CABLE NEEDLE – for the cables
----------------------------------------------------------

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

53% Cotton, 33% Viscose, 14% Linen
from 1.80 £ /50g
DROPS Belle uni colour DROPS Belle uni colour 1.80 £ /50g
Wool Warehouse Direct Ltd
Order
needles DROPS Needles & Hooks Order
You can get the yarn to make this pattern from 16.20£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
RIDGE/GARTER STITCH (worked in the round):
1 ridge = 2 rounds. Knit 1 round and purl 1 round.

PATTERN:
See diagrams A.1 and A.2. The diagrams show all rows in the pattern from the right side.

RAGLAN:
Decrease 2 stitches in each transition from body and sleeves. 
Decrease as follows from the right side:
Work until there are 3 stitches left before the next marker thread. Knit 2 together, knit 2 (the marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1, lift the slipped stitch over.

KNITTING TIP: 
If the knitting tension is not right in height and the work is too tight, the raglan decreases will be too short and the armhole too small. This can be adjusted by working an extra round without decreases evenly spread between rounds with decreases. 
----------------------------------------------------------

JUMPER:
The body is worked in the round on circular needle. The sleeves are worked in the round on double pointed/small circular needle. Then the body and the sleeves are worked in the round with a raglan decreases.

BODY:
Cast on 184-200-216-236-268-284 stitches with circular needle size 4 mm and Belle. Knit 1 round, then continue as follows:

Purl 1, knit 2, * purl 2 / knit 2 *, work from *-* across the next 4-8-12-8-16-20 stitches, * A.1 A (= 6 stitches), A.2 A (= 12 stitches) *, work from *-* in total 4-4-4-5-5-5 times, A.1 A, * knit 2 /purl 2 *, work from *-* across the next 12-20-28-20-36-44 stitches, knit 2, * A.1 A (= 6 stitches), A.2 A ( = 12 stitches) *, work from *-* in total 4-4-4-5-5-5 times, A.1 A, * knit 2 / purl 2 *, work from *-* across the next 4-8-12-8-16-20 stitches, knit 2,purl 1. Continue this pattern until the piece measures 8 cm, continue with A.1B over A.1 A and A.2 B over A.2A and stocking stitch over the 14-22-30-22-38-46 stitches of rib in each side. When A.1 B has been completed 1 time in height continue with A.1 C over A.1 B, there are now 194-210-226-248-280-296 stitches on the needle. Insert 2 marker threads in the piece, 1 at the beginning of the round and 1 after 97-105-113-124-140-148 stitches = the sides. REMEMBER THE KNITTING TENSION!

When the piece measures 34-34-35-35-35-35 cm cast off 8-8-10-10-12-14 stitches in each side (= 4-4-5-5-6-7 stitches on each side of each marker thread) = 89-97-103-114-128-134 stitches on the front piece and on the back piece. Lay the piece to one side and work the sleeves.

SLEEVES:
The piece is worked in the round with double pointed needles, change to a short circular needle when there are enough stitches. Cast on 38-38-42-42-46-46 stitches with double pointed needles size 4 mm and Belle. Knit 1 round, then work as follows:

Sizes S-M-XXL-XXXL: purl 1, * knit 2, purl 2 *, work from *-* over the next 4-4-8-8 stitches, knit 2, A.1 A, A.2 A, A.1A, * knit 2, purl 2 *, work from *-* over the next 4-4-8-8 stitches, knit 2, purl 1.
Sizes L-XL: knit 1, * purl 2, knit 2 * work from *-* over the next 8 stitches, A.1 A, A.2 A, A.1A, * knit 2, purl 2 *, work from *-* over the next 8 stitches, knit 1.

Continue this pattern until the piece measures 8 cm, continue with A.1B over A.1A and A.2B over A.2 A and stocking stitch over the 14-14-18-18-22-22 stitches rib. When A.1 B has been completed 1 time in height continue with A.1 C over A.1 B, there are now 40-40-44-44-48-48 stitches on the needle. Insert 1 marker thread at the beginning of the round = mid under sleeve. When the piece measures 10-10-10-12-12-12 cm increase 1 stitch on each side of the marker thread, the increased stitches are worked in stocking stitch. Increase every 2-1½1½-1-1-1 cm in total 15-19-21-23-23-25 times = 70-78-86-90-94-98 stitches. When the piece measures 48-47-47-46-44-43 cm, adjust so that the next round to be worked is the same round in the pattern where you stopped on the body, on the next round cast off 8-8-10-10-12-14 stitches mid under sleeve = 62-70-76-80-82-84 stitches. Work the other sleeve in the same way.

YOKE: 
Place the sleeves on the same circular needle as the body where the cast-off stitches are for the armholes = 302-334-358-388-420-436 stitches. Insert a marker thread in each transition between body and sleeves = 4 marker threads. Continue the pattern as before, AT THE SAME TIME as you decrease to RAGLAN – see description above. The decreases are different for the body and sleeves. Decrease as follows:

RAGLAN SLEEVE:
Decrease every 4th round 3-2-0-0-2-4 times, every 2nd round 17-22-24-28-28-27 times, then every round 0-0-3-1-0-0 times (in total 20-24-27-29-30-31 times).

RAGLAN BODY:
Decrease every 2nd round 19-22-22-23-23-26 times and every round 5-5-7-11-17-16 times (in total 24-27-29-34-40-42 times).
 
After all the decreases, there are 126-130-134-136-140-144 stitches on the needle. Work 1 RIDGE – see description above, on the first round decrease 34-34-34-32-32-32 stitches evenly along the round = 92-96-100-104-108-112 stitches. Continue with rib (knit 2 / purl 2) for 3 cm. Cast off with knit over knit and purl over purl.

ASSEMBLY: 
Sew the openings mid-under the sleeves.

This pattern has been corrected. .

Updated online: 06.07.2017
BODY:...A.2 A ( = 12 stitches) *, work from *-* in total 4-4-4-5-5-5 times, A.1 A, * knit 2 / purl 2 *, work from *-* across the next 4-8-12-8-16-20 stitches, knit 2,purl 1...

Diagram

symbols = knit from right side, purl from wrong side
symbols = purl from right side, knit from wrong side
symbols = no stitch, skip this square
symbols = slip 1 stitch, knit 2 stitches in the next stitch, lift the slipped stitch over
symbols = between 2 stitches, make 1 yarn over
symbols = slip 1 stitch, knit 2, lift the slipped stitch over the knitted stitch
symbols = slip 1 stitch, knit 1, lift the slipped stitch over the knitted stitch
symbols = knit 2 together
symbols = place 3 stitches on cable needle in front of piece, knit 3, knit 3 stitches from cable needle
diagram
diagram
signature

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 177-11) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (67)

country flag Małgorzata 12.04.2021 - 22:15:

Dziękuję, wiem że 2 oczka prawe i 2lewe to sciagacz, ile ma cm? Na zdjęciu jest dość wysoki, wzór wyrabiam nad ściągaczem, zapis jest dla mnie niezrozumiały..TYŁ & PRZÓD: Na drutach z żyłką nr 4 nabrać 184-200-216-236-268-284 oczka włóczką Belle. Przerobić 1 okrążenie na prawo i dalej przerabiać następująco 1 oczko lewe, 2 oczka prawe, *2 oczka lewe / 2 oczka prawe*, przerobić od *-* ponad 4-8-12-8-16-20 następnymi oczkami, *A.1 A (= .......,pozdrawiam

user icon DROPS Design 13.04.2021 kl. 19:37:

Witaj Małgosiu, ten specyficzny ściągacz na początku robótki ma wys. 8 cm. Pozdrawiamy!

country flag Małgorzata 12.04.2021 - 14:25:

Witam , czy napisane jest coś o ściągaczu na początku robótki, dziękuję

user icon DROPS Design 12.04.2021 kl. 15:07:

Witaj Gosiu, tak jest, patrz część TYŁ I PRZÓD, od fragmentu : 'Przerobić 1 okrążenie na prawo i dalej przerabiać następująco: 1 oczko lewe, 2 oczka prawe, *2 oczka lewe / 2 oczka prawe*, przerobić od *-* ... ' Pozdrawiamy!

country flag Agnieszka Janicka 20.11.2020 - 19:16:

Czy zamykanie oczek na reglan ,ma wchodzić na wzór fantazyjny w przodzie i w tyle?i jak na wzorze zamykać te oczka?

user icon DROPS Design 21.11.2020 kl. 12:36:

Witaj Agnieszko, tak, zamykanie oczek na reglan będzie wchodzić na ścieg fantazyjny. Musisz zamykać te oczka jak zwykłe oczka, zgodnie z opisem w części REGLAN. Pamiętaj, że oczka są zamykane w innej kolejności na rękawach, a w innej na przodzie i tyle. Powodzenia!

country flag Agnieszka Janicka 20.11.2020 - 10:01:

Dziękuję za odpowiedź,ale jeszcze dopytam mam zacząć zamykać te 24 razy od samego początku ,czyli od połączenia rękawów z resztą ,czy mam przerobić 4 rzędy nie zamykając nic ,a potem zacząć zamykać ?

user icon DROPS Design 20.11.2020 kl. 10:37:

Witaj Agnieszko! Przerób 3 okrążenia, zamykaj oczka w 4-tym okrążeniu itd. Pomocny może być kurs TUTAJ. Pozdrawiamy serdecznie!

country flag Agnieszka Janicka 19.11.2020 - 19:10:

Jak mam rozumieć zdanie: zamykać oczka 0 razy co 4 okrążenia ,24 razy co 2 okrążenia?

user icon DROPS Design 20.11.2020 kl. 08:20:

Witaj Agnieszko! To znaczy, że w twoim rozmiarze oczka będą zamykane wyłącznie 24 razy co 2 okrążenia. Pozdrawiamy!

country flag Moira 10.10.2020 - 18:48:

Salve. Non capisco nella lavorazione del diagramma A1 B, quando dice " lavorare la maglia successiva 2 volte a diritto". Sono due diritti normali i uno davanti e uno dietro?

user icon DROPS Design 10.10.2020 kl. 20:20:

Buongiorno Moira. Deve lavorare la stessa maglia sia nel filo davanti che in quello dietro. Buon lavoro!

country flag Judy Canning 26.09.2020 - 22:43:

I am confused about the pattern as the left chart has a different number of rows than the right pattern. The way I read it, in the areas where there are 6 stitches, I knit A.1 A, then A.1 B, then A.1 C, then A.1 B... repeat. At the same time , for the 12-stitch sections, I keep doing A.2 A, then A.2 B, over and over. Is that correct? Thank you, Judy Canning

user icon DROPS Design 28.09.2020 kl. 09:42:

Dear Mrs Canning, when A.1A and A.2A are done, work A.1B over A.1A and A.2B over A.2A - when A.1B has been worked one time in height,work A.1C and repeat now A.1C - when A.2B has been worked in height, repeat from first row but continue A.1C as before until it has been done in height, then repeat A.1C from the first row. This means diagrams are worked over a different number of rows. Happy knitting!

country flag Chantal 30.05.2020 - 22:22:

Buongiorno! Ho messo sullo ferro circolare le maniche assieme al corpo, ho capito come fare il raglan, ma non capisco cosa vuol dire che le diminuzioni sono diverse per il corpo e per le maniche. Sto facendo una taglia m: raglan sulle maniche ogni 2 giri per 24 volte, raglan corpo ogni 2 giri 22 volte. Mi potete aiutare? Pensavo che il raglan diminuisse un punto sulla manica e uno sul corpo, ma a questo punto non capisco come e ogni quanto diminuire...

user icon DROPS Design 31.05.2020 kl. 17:25:

Buongiorno Chantal. Può esserle utile farsi una tabella dove indica il numero del giro e se deve diminuire o meno sul corpo e sulle maniche.P.es, taglia M: giro 1 diminuisce sul corpo e sulle maniche; giro 3: diminuisce solo sul corpo; giro 5 dim sul corpo e maniche e così via. Buon lavoro!

country flag Judith Martin 18.04.2020 - 15:05:

Hallo Drops-Team, ich habe eine Frage bezüglich der Länge des Rumpfteils. In der Anleitung steht, "Bei einer Länge von 34-34-35-35-35-35 cm je 8-8-10-10-12-14 Maschen an beiden Seiten des Pullovers abketten". Bei mir ist der Pullover in der Länge 35cm allerdings noch lange nicht unter den Achseln. Andererseits habe ich nach der erfolgreichen Maschenprobe Grösse L angefangen, durch das Zopfmuster zieht sich aber die Arbeit zusammen, so dass es zu eng wurde und ich neu anfangen musste.

user icon DROPS Design 20.04.2020 kl. 09:49:

Liebe Frau Martin, Länge stimmt Maßskizze: 35 cm vor den Armausschnitt + 18 cm Passe + 4 cm Schulter + 3 cm Halsblende = 60 cm. Wegen Breite, versuchen Sie mit der dieselben Maschenprobe wie beim Probelappen zu stricken hier lesen Sie mehr über Maschenprobe. Viel Spaß beim stricken!

country flag Mouton Aurore 30.01.2020 - 09:52:

Bonjour, merci pour votre réponse qui a été rapide. Je vais pouvoir m'y mettre en espérant y arriver. Bonne journée à vous

Post a comment to pattern DROPS 177-11

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

From the #dropsfan gallery

177-11 Skipper

Alfia, Russian Federation

S k i p p e r

Nina, United States