DROPS Extra / 0-616

DROPS Extra 0-616 by DROPS Design

Knitted DROPS jacket with pleats in 2 threads ”Alpaca”. Size S - XXXL.

DROPS design: Pattern no Z-402
---------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials: DROPS ALPACA from Garnstudio
600-650-700-800-850-950 g colour no 2110, wheat

DROPS CIRCULAR NEEDLE (80 cm) size 5 mm – or size needed to get 17 sts x 22 rows in stocking st with 2 threads Alpaca = 10 x 10 cm.
DROPS CIRCULAR NEEDLE (80 cm) size 4 mm – for garter st.
DROPS CROCHET HOOK size 4 mm – for tie strings.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Alpaca
from 3.20 £ /50g
DROPS Alpaca uni colour DROPS Alpaca uni colour 3.20 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Alpaca mix DROPS Alpaca mix 3.30 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 38.40£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (back and forth on needle): K all rows.
MEASUREMENT TIP:
Because of the weight of the yarn make all measurements whilst the garment is hanging, otherwise it will be too long when worn.
PLEATS:
See diagrams M.1 and M.2. Diagrams show the pattern from RS.
INCREASING TIP (applies to collar):
Inc for collar inside the 2 outermost sts on front band. Inc 1 st by making 1 YO. On return row work YO into back of loop to avoid a hole.
---------------------------------------------------------
---------------------------------------------------------

JACKET:
Worked back and forth on circular needle from mid front.

BODY PIECE:
Cast on 194-234-246-286-322-342 sts on circular needle size 4 mm with 2 threads Alpaca. Work 2 sts each side towards mid front with 4 threads – use a small extra ball each side. Work 4 rows GARTER ST - see above. Change to circular needle size 5 mm and continue in stocking st with 10 garter sts each side for front band. When piece measures 30 cm for all sizes - See MEASUREMENT TIP - work next row as follows from RS: 10 garter sts (= front band), K 5-5-6-6-7-8 sts, M.1 a total of 5-7-7-9-10-10 times across the row (= 30-42-42-54-60-60 sts dec to 15-21-21-27-30-30 sts), K 16-12-16-13-16-24 sts, M.2 a total of 5-7-7-9-10-10 times across the row, K 12-12-14-12-16-18 sts, M.1 a total of 5-7-7-9-10-10 times across the row, K 16-12-16-13-16-24 sts, M.2 a total of 5-7-7-9-10-10 times across the row, and finish with K 5-5-6-6-7-8 sts and 10 garter sts (= front band) = 134-150-162-178-202-222 sts. Insert a marker 38-42-45-49-55-60 sts in from each side (= 58-66-72-80-92-102 sts between markers on back piece). Change to circular needle size 4 mm and work 8 rows garter st (first row = K from WS).
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Change back to circular needle size 5 mm and continue in stocking st with front bands in garter st as before. When piece measures 35-35-36-36-36-36 cm inc 1 st each side of both markers (= 4 inc sts). Repeat the inc on every 1.5-1.5-1.5-1.5-2-2 cm a total of 7 times.
AT THE SAME TIME when piece measures 37 cm work 1 st extra in garter st for front band (i.e. number of sts remain the same, but no of garter sts on front band inc and no of stocking sts dec). Repeat this on every 3 cm a total of 9-9-10-11-11-12 times.
AT THE SAME TIME when piece measures 39 cm inc 1 st towards mid front for collar – see INCREASING TIP. Repeat the inc on every 3 cm a total of 10 times. AT THE SAME TIME when piece measures 46-47-48-49-50-51 cm - REMEMBER MEASUREMENT TIP – cast off 6 sts each side for armhole (i.e. 3 sts each side of marker) and complete each piece separately.

BACK PIECE:
= 66-74-80-88-100-110 sts. Cat off for armhole each side at the beg of every row: 2 sts 0-1-2-3-5-6 times and 1 st 1-2-2-3-4-6 times = 64-66-68-70-72-74 sts. When piece measures 64-66-68-70-72-74 cm cast off the middle 18-18-20-22-22-24 sts for neck and complete each shoulder separately. Cast off 1 st on neckline on next row = 22-23-23-23-24-24 sts left on shoulder. Cast off when piece measures 66-68-70-72-74-76 cm.

RIGHT FRONT PIECE:
Continue to include more sts in front band and inc for collar as before. AT THE SAME TIME cast off for armhole at the beg of every row from the side as described for back piece. AT THE SAME TIME when piece measures 52-54-56-58-60-62 cm work shortened rows on front band as follows: * work 2 rows on the first 15 sts on needle, work 6 rows on all sts *, repeat from *-* until finished measurements. When piece measures 66-68-70-72-74-76 cm cast off 22-23-23-23-24-24 sts at beg of row from the side for shoulder = 29-29-30-31-31-32 sts left on collar. Work remaining sts on row. Now continue with shortened rows on collar as follows (first row = RS):
* K 2 rows on 15 sts, K 2 rows on all sts *, repeat from *-* until collar measures 7-7-8-8-9-9 cm (measured on the shorter side) from shoulder. Cast off loosely.

LEFT FRONT PIECE:
Like right front piece, but mirrored.

SLEEVE:
Worked back and forth on needle. Cast on 50-52-54-56-58-60 sts (includes 1 edge st each side) on circular needle size 4 mm with 2 threads Alpaca. Work 10 rows garter st. Change to circular needle size 5 mm and continue in stocking st with 1 edge st each side, AT THE SAME TIME inc 6 sts evenly on first row = 56-58-60-62-64-66 sts. When piece measures 8 cm inc 1 st each side on every 7-7-5-4.5-3.5-2.5 cm a total of 4-4-5-6-7-9 times = 64-66-70-74-78-84 sts. When piece measures 34-33-32-33-31-30 cm – NOTE: less for the larger sizes because of longer sleeve cap and wider shoulder – cast off for sleeve cap each side at the beg of every row: 3 sts 1 time, 2 sts 3-3-3-3-4-4 times, 1 st 0-2-3-3-3-4 times, then 2 sts each side until piece measures 40-41-41-42-42-42 cm, now cast off 3 sts 1 time each side and cast off remaining sts. Piece measures approx 41-42-42-43-43-43 cm.

ASSEMBLY:
Sew shoulder seams. Sew sleeve seams inside 1 edge st and set in sleeves. Sew collar tog mid back, sew in outer loops of sts, and sew collar to neck on back piece.

TIE STRING:
Crochet a ch-chain measuring approx 50 cm on left front piece – beg with 1 dc in st on jacket in line with the garter sts on waist. Crochet a similar chain for tie string at the side on right front piece – these are tied tog. Now crochet a chain at the front on right front piece and one on the inside at the side on left front piece – these are tied tog to keep jacket in place.

Diagram

= slip 3 sts on cable needle behind piece, K tog first st on needle with first st on cable needle a total of 3 times.
= slip 3 sts on cable needle in front of piece, K tog first st on cable needle with first st on needle a total of 3 times.

Francoise 01.09.2015 - 20:32:

Super facile a realiser est je suis debutante merci drop

Anna 05.03.2015 - 13:30:

In der Anleitung zu Modell DROPS extra 0-616 steht: GLEICHZEITIG nach 37 cm 1 M. extra in die Blende einstricken (die Maschenzahl bleibt konstant). Diese Aufnahme alle 3 cm total 9-9-10-11-11-12 Mal wiederholen . Wie kann man eine Masche einstricken damit die Maschenzahl konstant bleibt?Soll man das auf jeder Seite der Jache machen oder nur auf einer?Danke

DROPS Design 06.03.2015 kl. 23:46:

Es soll bedeuten, dass Sie von den glatt-re-M 1 M kraus re stricken, d.h. die glatt-re-M neben den Blenden-M wird kraus re gestrickt. Damit wird die Maschenzahl der Blende größer (denn Sie stricken ja dann jeweils 1 M mehr kraus re) und die M-Zahl des glatt re gestrickten Bereichs wird kleiner. Insgesamt bleibt die M-Zahl damit gleich.

Amelia 06.07.2010 - 08:45:

Hola,,, desde que he encontrado vuestra pagina web la consulto con mucha frecuencia.Los patrones son muy detallados y las fotos de los modelos son muy buenos. Pregunto si es posible o esta previsto traducir los modelos 122-18 y 126-1. muchas gracias.

Post a comment to pattern DROPS Extra 0-616

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.