Loli wrote:
Para hacer la cenefa del escote cuando dice: pts de derecho, girar y estirar el hilo y así continuada mente , se hace como las vueltas cortas que aparece en los vídeos de ayuda? Gracias
14.07.2016 - 22:09DROPS Design answered:
Hola Loli. Exactamente, la cenefa en la parte de la espalda se trabaja con las filas acortadas.
15.07.2016 - 20:39
Margret Kortstegge wrote:
Habe diesen tollen Sommerpullover gerade fertiggestellt - bin von den Anleitung begeistert!
20.06.2016 - 20:06Anna K wrote:
Hej! Är det meningen att man i första mönstervarvet i diagram A1b skall göra två omslag efter varandra eller hur skall jag göra? Tack på förhand!
14.05.2016 - 19:03DROPS Design answered:
Hej. Nej, du stickar en maska mellan de 2 omslagen. Lycka till!
16.05.2016 - 14:14
Clawur wrote:
Hallo! Gibt es zufällig ein Video für die Halsblende mit Erhöhung? Ich kann mir darunter nicht wirklich was vorstellen und verstehe die Anleitung diesbezüglich nicht. Danke!
12.05.2016 - 19:28DROPS Design answered:
Hallo, dazu gehören die beiden verlinkten Videos zu den verkürzten Reihen. Durch Stricken von verkürzten Reihen wird der hintere Halsausschnitt höher, oder anders ausgerückt, entsteht der tiefere Ausschnitt am Vorderteil.
16.05.2016 - 11:54
Gosia wrote:
Dzień dobry, robię właśnie sweter wg wzoru DROPS 170-7 (Clara). Na wys. 40 cm od dołu robótki trzeba zamknąć 3o. na podkrój rękawa, przer. 71 o.p. (= tył), zamknąć 6o. na podkrój rękawa, przer. 71o.p. (= przód) i zamknąć 3 ost. o. na podkrój rękawa. Nie potrafię zamknąć trzech ostatnich oczek - zawsze zostaje mi w środku oczko. Jak to zrobić to okrążenie poprawnie?
27.04.2016 - 10:28DROPS Design answered:
Witam, Przez ostatnie oczko trzeba przeciągnąć nitkę i zakończyć. Teraz będziemy mieli osobny przód i tył, a między nimi przerwy skłądające się z 6 zamkniętych o. POWODZENIA! Proszę koniecznie podzielić się z nami efektem końcowym na naszym facebooku.
27.04.2016 - 17:33
Maria wrote:
Hallo, ich bin gerade dabei, den Pulli zu stricken und bin nun etwas verwundert über den Kragen, der zum Schluss gestrickt wird. Auf dem Bild ist nicht zu sehen, dass eine "Halsblende mit Erhöhung" angestrickt wird. Ist dies korrekt und auf dem Bild nur nicht zu sehen?
26.04.2016 - 15:35DROPS Design answered:
Liebe Maria, die Halsblende mit Erhöhung ist nur separat beschreiben, aber es ist kein separates Teil. Wir meinen damit, dass Sie hinten am Nacken zusätzliche (verkürzte) Reihen stricken, damit ein Halsausschnitt entsteht. Also vorne tiefer, oder andersrum formuliert, hinten höher.
28.04.2016 - 09:51
Malin wrote:
Hei, når dere sier "arbeidet" (se under), mener dere 6 cm kun med mønsterdiagram A1.A-C eller mener dere 6 cm inklusiv de 3 rillene helt fra starten av bolen? BOLEN: når arb måler 6 cm felles...
17.04.2016 - 19:11DROPS Design answered:
Hej. Vi menar helt från starten av arbetet (dvs inkl. riller). Lycka till!
29.04.2016 - 10:30
Gunilla wrote:
Var hittar jag diagram A.2, som ska stickas på okdelen?
19.03.2016 - 13:34DROPS Design answered:
Hei Gunilla. Det staar nederst paa mönstret
23.03.2016 - 14:35Solange M. wrote:
Hello! I would like to make this longer, like a tunic dress, since I have to buy the yarn online I was wondering how much more yarn do you think I would need to make the M size around 30 / 35 cm longer? Thanks!
03.03.2016 - 13:02DROPS Design answered:
Dear Solange M., we are unfortunately not able to adjust all our patterns to each individual request, but you can take inspiration from a similar pattern to adjust amount of yarn - Your DROPS store will also help you for any individual assistance. Happy knitting!
03.03.2016 - 13:50
Madeleine wrote:
Åh vad snygg! denna måste jag hinna göra till sommaren! Tack för det fina mönstret!
29.02.2016 - 12:46
Clara#clarasweater |
||||||||||||||||
|
||||||||||||||||
Knitted DROPS jumper with lace pattern, round yoke and ¾ sleeves in ”Cotton Light”. Size: S - XXXL
DROPS 170-7 |
||||||||||||||||
GARTER ST (worked in the round): 1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*. PATTERN: See diagrams A.1 and A.2. NOTE: Note that on some rounds in A.1 there is pattern on EVERY round. DECREASE TIP-1: To calculate how often dec should be done, use the total no of sts on round (e.g. 184 sts) and divide by no of dec to be done (e.g. 22) = 8.4. I.e. in this example K approx. every 7th and 8th st tog. DECREASE TIP-2 (applies to sides of body): Dec as follows before first and third marker: Beg 2 sts before marker and K 2 tog. Dec as follows after second and fourth marker: Slip 1 st as if to K, K 1, psso. INCREASE TIP (applies to sides of body): Inc as follows before first and third and after second and fourth marker: Make 1 YO. On next round K YO twisted to avoid holes. ---------------------------------------------------------- BODY: Because of pattern in A.1 work piece in the round on circular needle. Cast on 184-202-218-240-264-294 sts on circular needle size 3.5 mm with Cotton Light. Work 3 ridges in GARTER ST - see explanation above. Switch to circular needle size 4 mm and K 1 round while dec 22-20-28-26-34-40 sts evenly - READ DECREASE TIP-1 = 162-182-190-214-230-254 sts. Work next round as follows: Work 8-13-7-13-9-7 sts in stocking st, insert 1 marker (= first marker), * work pattern according to diagram A.1A (= 8 sts), repeat A.1B over the next 48-48-64-64-80-96 sts (= 3-3-4-4-5-6 repetition of 16 sts), work A.1C (= 9 sts) *, insert 1 marker (= second marker), work 16-26-14-26-18-14 sts in stocking st, insert 1 marker (= third marker), repeat from *-* one more time, insert 1 marker (= fourth marker) and finish with 8-13-7-13-9-7 sts in stocking st. Continue pattern like this. REMEMBER THE KNITTING TENSION When piece measures 6 cm, dec before first and third and after second and fourth marker – READ DECREASE TIP-2 (= 4 sts dec). Repeat dec every 3 cm a total of 6 times = 138-158-166-190-206-230 sts. When piece measures 26 cm, inc before first and third and after second and fourth marker – READ INCREASE TIP (= 4 sts inc). Repeat inc every 3-4-4-4-4-5 cm a total of 4 times = 154-174-182-206-222-246 sts. When piece measures 40-42-42-44-44-46 cm, work next round as follows: Cast off 3-3-4-4-5-5 sts for armhole, K 71-81-83-95-101-113 (= back piece), cast off 6-6-8-8-10-10 sts for armhole, K 71-81-83-95-101-113 (= front piece) and cast off the last 3-3-4-4-5-5 sts for armhole. Put piece aside and knit the sleeves. SLEEVE: Because of pattern in A.1 work piece in the round on double pointed needles. Cast on 58-58-58-60-62-64 sts on double pointed needles size 3.5 mm with Cotton Light. Work 3 ridges. Switch to double pointed needles size 4 mm and K 1 round while dec 7 sts evenly = 51-51-51-53-55-57 sts. Work next round as follows: 1-1-1-2-3-4 sts in stocking st, work pattern according to diagram A.1A (= 8 sts), repeat A.1B over the next 32 sts (= 2 repetitions of 16 sts), work A.1C (= 9 sts) and finish with 1-1-1-2-3-4 sts in stocking st. Continue pattern like this. When piece measures 8 cm, inc 1 st on each side of the middle 2 sts mid under sleeve (inc by making 1 YO, on next round K YO twisted to avoid holes). Repeat inc every 5-4-3½-3-2½-2 cm 5-6-7-8-9-10 times in total = 61-63-65-69-73-77 sts. When piece measures 32-32-31-31-29-29 cm (NOTE: Shorter measurements in the larger sizes because of longer yoke) work next round as follows: Cast off 3-3-4-4-5-5 sts, K 55-57-57-61-63-67 and cast off the last 3-3-4-4-5-5 sts. Put piece aside and knit another sleeve. YOKE: Switch to circular needle size 3.5 mm and slip sleeves on to same circular needle as body where armholes were cast off (without working them first) = 252-276-280-312-328-360 sts. Then work pattern in the round according to diagram A.2 (choose diagram for correct size = 17-18-19-21-22-24 repetitions of 14 sts), AT THE SAME TIME dec 14-24-14-18-20-24 sts evenly on first round – READ DECREASE TIP-1 = 238-252-266-294-308-336 sts on needle. When diagram A.2 has been worked, there are 119-126-133-147-154-168 sts on needle and piece measures approx. 56-58-60-62-64-66 cm, cut the yarn. NECK EDGE WITH ELEVATION: Beg from RS mid back and work in garter st back and forth on circular needle size 3.5 as follows: K 7-7-8-9-9-10 sts, turn, tighten yarn and K 14-14-16-18-18-20 sts back. Turn, tighten yarn and K 21-21-24-27-27-30 sts, turn, tighten yarn and K 28-28-32-36-36-40 sts back. Continue back and forth like this and work 7-7-8-9-9-10 sts more on every turn until 56-56-64-72-72-80 sts in total have been worked (= 8 rows in total), turn piece, tighten yarn and K until mid back. K 1 round over all sts while dec 23-24-27-31-34-36 sts evenly = 96-102-106-116-120-132 sts on needle. P 1 round, K 1 round and P 1 round. Then loosely cast off with K. ASSEMBLY: Sew the openings under the sleeves. |
||||||||||||||||
Diagram explanations |
||||||||||||||||
|
||||||||||||||||
![]() |
||||||||||||||||
![]() |
||||||||||||||||
![]() |
||||||||||||||||
Have you finished this pattern?Tag your pictures with #dropspattern #clarasweater or submit them to the #dropsfan gallery. Do you need help with this pattern?You'll find 26 tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2025 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Post a comment to pattern DROPS 170-7
We would love to hear what you have to say about this pattern!
If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.