DROPS Super Sale · SAVE 30% on 5 cosy, wool yarns
DROPS Daisy
100% Wool
from 3.75 € /50g
DROPS Kid-Silk
75% Mohair, 25% Silk
from 5.05 € /25g
Get the yarn to make this pattern from 50.20€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Autumn & Winter 26/27

Moon Reflection Sweater

Knitted oversize jumper in DROPS Daisy and DROPS Kid-Silk or DROPS Puna and DROPS Kid-Silk. Piece is knitted top down in stocking stitch with raglan, double neck edge and vents in the sides. Size XS – XXXL.

Highlight Size:


DROPS 273-17

#moonreflectionsweater

DROPS design: Pattern da-060
Yarn group B + A or C
----------------------------------------------------------

SIZE:
XS - S - M - L - XL - XXL - XXXL

YARN:
DROPS DAISY from Garnstudio (belongs to yarn group B)
400-450-500-500-550-650-700 g colour 02, Marzipan
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
100-125-125-150-150-175-175 g colour 56, Marzipan

Or use:
DROPS PUNA from Garnstudio (belongs to yarn group B)
400-450-500-500-550-650-700 g colour 02, Beige
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
100-125-125-150-150-175-175 g colour 56, Marzipan

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 5.5 mm: Length 40 and 80 cm.
DROPS CIRCULAR NEEDLE SIZE 4 mm: Length 40 and 80 cm.
DROPS DOUBLE POINTED NEEDLES SIZE 5.5 mm.
DROPS DOUBLE POINTED NEEDLES SIZE 4 mm.
The technique MAGIC LOOP can be used- you then only need circular needle of 80 cm in each size.

KNITTING TENSION:
16 stitches in width and 20 rows vertically in stocking stitch and 1 strand of each quality needle size 5.5 mm = 10 x 10 cm.
REMEMBER: Needle size is only a suggestion. If you have too many stitches on 10 cm switch to larger sized needles or if you get too few stitches on 10 cm switch to smaller sized needles.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

You might also like...

DROPS Daisy
100% Wool
from 3.75 € /50g
DROPS Kid-Silk
75% Mohair, 25% Silk
from 5.05 € /25g
Get the yarn to make this pattern from 50.20€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

0
0

----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

GARTER STITCH:
Knit on all rows, i.e. knit from right side and knit from wrong side.
1 ridge vertically = knit 2 rows.

RAGLAN:
All increases are done from right side.
Increase 1 stitch by making 1 yarn over. On next row/round work yarn overs as explained below:
FROM WRONG SIDE:
BEFORE RAGLAN STITCH (= twist yarn over towards the left):
Purl yarn over in stitch loop behind the needle - to avoid holes.
AFTER RAGLAN STITCH (= twist yarn over towards the right):
Move yarn over from left needle to right needle purlwise, slip yarn over back on left needle by inserting left needle from behind in yarn over (yarn over is now twisted). Purl yarn over in stitch loop that is in front the needle - to avoid holes.
FROM RIGHT SIDE:
BEFORE RAGLAN STITCH (= twist yarn over towards the right):
Move yarn over from left needle to right needle purlwise, slip yarn over back on left needle by inserting left needle from behind in yarn over (yarn over is now twisted). Knit yarn over in loop in front of needle - to avoid holes.
AFTER RAGLAN STITCH (= twist yarn over towards the left):
Knit yarn overs in loop behind the needle - to avoid holes.

SLEEVE TIP:
When picking up stitches mid under sleeve, there will be a small hole in the transition between stitches on body and sleeves. The holes can be closed by picking up the strand between two stitches - work this strand twisted together with the first stitch between body and sleeve to close the hole.

DECREASE TIP:
Decrease 1 stitch on each side of marker thread as follows:
Work until 3 stitches remain before marker thread, knit 2 together, knit 2 (marker thread is between these 2 stitches), slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 2 stitches decreased).

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

JUMPER - SHORT OVERVIEW OF THE PIECE:
In this pattern needles of different length have been used, begin with fitting length for number of stitches and switch as needed.
Worked top down. Cast on stitches for neck and work back and forth on circular needle with increases for raglan – AT THE SAME TIME cast on stitches for neck in each side of needle until correct number of stitches and the neck is done. Then work the yoke in the round on circular needle top down.
When yoke is done, divide piece for body and sleeves. Work body downwards in the round on circular needle while putting the sleeves aside. Divide the body for vents in each side, then finish front piece and back piece back and forth separately. Then work sleeves downwards in the round on needle. Finish by picking up stitches around the neck and work a neck edge in the round. Fold the neck edge double against the wrong side and fasten.
If 0 stitches are given for the chosen size, it means that you skip the information and jump to next information.

NECKLINE:
Cast on 56-58-60-62-66-66-68 stitches on circular needle size 5.5 mm with 1 strand DROPS Daisy / DROPS Puna together with 1 strand DROPS Kid-Silk (= 2 strands). Purl 1 row from wrong side.
Insert 4 markers in piece without working the stitches, insert markers in a stitch, these stitches are called raglan stitches and increase is done for raglan on each side of raglan stitches.
Count 1 stitch (= left side of neck at the front), insert 1st marker in next stitch, count 14-14-14-14-16-16-16 stitches (= sleeve),
insert 2nd marker in next stitch, count 22-24-26-28-28-28-30 stitches (= back piece),
insert 3rd marker in next stitch, count 14-14-14-14-16-16-16 stitches (= sleeve),
insert 4th marker in next stitch, 1 stitch remains after last marker (= right side of neck at the front).

INFORMATION BEFORE CONTINUING:
Work stocking stitch back and stocking forth - AT THE SAME TIME cast on new stitches for neck and AT THE SAME TIME increase for RAGLAN – read explanation above for increase method and work as explained below.

WORK AND INCREASE AS FOLLOWS:
ROW 1 (= right side): Knit, increase for raglan on each side of raglan stitches (= 8 stitches increased), then cast on 2 new stitches at the end of row for neck = 66-68-70-72-76-76-78 stitches.
ROW 2 (= wrong side): Purl (remember to work yarn overs twisted to separate sides as explained in RAGLAN), then cast on 2 new stitches at the end of row for neck = 68-70-72-74-78-78-80 stitches.
ROW 3 (= right side): Knit, increase for raglan on each side of raglan stitches (= 8 stitches increased), then cast on 2 new stitches at the end of row = 78-80-82-84-88-88-90 stitches.
ROW 4 (= wrong side): Purl (work yarn overs twisted to separate sides), then cast on 2 new stitches at the end of row for neck = 80-82-84-86-90-90-92 stitches.
ROW 5 (= right side): Knit, increase for raglan on each side of raglan stitches (= 8 stitches increased), then cast on 3 new stitches at the end of row = 91-93-95-97-101-101-103 stitches.
ROW 6 (= wrong side): Purl (work yarn overs twisted to separate sides), then cast on 3 new stitches at the end of row for neck = 94-96-98-100-104-104-106 stitches.
ROW 7 (= right side): Knit, increase for raglan on each side of raglan stitches (= 8 stitches increased), then cast on 6-8-10-12-12-12-14 new stitches at the end of row = 108-112-116-120-124-124-128 stitches.
AFTER 7TH ROW:
Neckline is now done, and 4 increases for raglan have been done in total on each side of raglan stitches. Cut the yarn.
Now work the piece from right shoulder at the back, so move stitches from left needle on to right needle until 3rd marker inserted (= marker between back piece and right sleeve – NOTE: Do not work the stitches but move them).

YOKE:
Work in stocking stitch in the round while AT THE SAME TIME increasing for raglan every other round, increase on each side of raglan stitches 0-1-0-4-12-14-14 more times (= 4-5-4-8-16-18-18 increases in total for raglan including the 4 increases done in the neckline) = 108-120-116-152-220-236-240 stitches. NOTE! At the beginning of round increase after stitch with 1st marker and at the end of round increase before stitch with 1st marker. Remember to follow the knitting tension!
Then continue increase as follows:
Increase for raglan every other round on front piece and back piece, but on sleeves increase only every 4th round (= alternately 4 and 8 stitches increased), repeat this increase 20-20-22-20-12-12-14 times in total on front piece and back piece and 10-10-11-10-6-6-7 times on sleeves.
After last increase there are 228-240-248-272-292-308-324 stitches on row and piece measures approx. 24-25-26-28-28-30-32 cm from cast-on edge mid back.
Now divide yoke for body and sleeves.

DIVIDING FOR BODY AND SLEEVES:
When dividing piece for body and sleeves the raglan stitches will be placed somewhat in on front piece/back piece in sizes XL, XXL and XXXL (in sizes XS, S, M and L divide the piece at the raglan stitches), i.e. AT THE SAME TIME as next round is worked divide yoke for body and sleeves as follows: Knit the first 1-1-1-1-4-5-6 stitches (= these stitches belong to back piece), slip the next 42-44-44-50-54-56-56 stitches on a thread for sleeve, cast on 8-10-12-14-16-18-20 new stitches on needle (= in the side mid under sleeve), knit 72-76-80-86-92-98-106 stitches (= front piece), slip the next 42-44-44-50-54-56-56 stitches on a thread for sleeve, cast on 8-10-12-14-16-18-20 new stitches on needle (= in the side mid under sleeve) and knit the last 71-75-79-85-88-93-100 stitches (= back piece). Finish body and sleeves separately.

BODY:
= 160-172-184-200-216-232-252 stitches. Insert 1 marker thread in each side of body, in the middle of the 8-10-12-14-16-18-20 stitches cast on under each sleeve and move the marker threads when working, use the marker threads when piece is divided for vents in each side.
Work until first marker thread, round begins here and work in the round in stocking stitch.
Work in stocking stitch until piece measures 43-45-47-49-49-51-53 cm from cast-on edge mid back.
Now divide the piece for a vent in each side of body, divide at the marker threads by setting the stitches from back piece on hold and working stitch from front piece back and forth on needle as explained below.

FRONT PIECE:
= 80-86-92-100-108-116-126 stitches. On next row (= wrong side) begin rib while AT THE SAME TIME increasing 25-27-29-31-35-37-39 stitches evenly on needle= 105-113-121-131-143-153-165 stitches, work as follows:
Switch to circular needle size 4 mm, work 1 stitch in GARTER STITCH - read explanation above, work rib (= purl 1 and knit 1 - remember increase) , until 2 stitches remain, purl 1 and 1 stitch in garter stitch. When rib measures 7-7-7-7-8-8-8 cm, cast off with knit over knit and purl over purl or use Italian cast-off.
Jumper measures 50-52-54-56-57-59-61 cm from cast-on edge mid back and approx. 54-56-58-60-62-64-66 cm from the top of shoulder.

BACK PIECE:
Work as on front piece.

SLEEVES:
Slip 42-44-44-50-54-56-56 sleeve stitches from one thread on to needle size 5.5 mm and pick in addition up 1 stitch in each of the 8-10-12-14-16-18-20 stitches cast on under sleeve - read SLEEVE TIP = 50-54-56-64-70-74-76 stitches.
Insert 1 marker in the middle of the 8-10-12-14-16-18-20 new stitches under sleeve - round begins at the marker thread.
Work in stocking stitch in the round on needle - AT THE SAME TIME when 1 round has been worked after division, decrease mid under sleeve – read DECREASE TIP and decrease as follows: Decrease 2 stitches every other round 2-2-2-2-3-3-3 times, then decrease 2 stitches every 2 cm 1-2-2-5-6-8-8 times = 44-46-48-50-52-52-54 stitches on needle.
Work until sleeve measures 38-37-37-35-35-34-33 cm from division.
Switch to double pointed needles size 4 mm and work rib (= knit 1 and purl 1) while AT THE SAME TIME increasing 8-8-10-10-10-10-10 stitches evenly on 1st round = 52-54-58-60-62-62-64 stitches.
When rib measures 4-4-4-4-5-5-5 cm, cast off with knit over knit and purl over purl or use Italian cast-off.
Sleeve measures approx. 42-41-41-39-40-39-38 cm from division.

NECK EDGE:
Use circular needle size 4 mm and 1 strand of each quality (= 2 strands). Begin from right side at right shoulder at the back and pick up approx. 76-80-84-88-92-92-96 stitches around the neck.
Knit 1 round while adjusting number of stitches to 92-96-100-104-112-112-116, number of stitches must be divisible by 2 and adjust so that there is an uneven number of stitches between each raglan stitch from yoke. Work rib in the round (= knit 1 and purl )1 and adjust so that raglan stitches continue as knit stitches in rib. Work until neck edge measures approx. 9-9-9-10-10-11-11 cm. Switch back to circular needle size 5.5 mm and cast off with knit over knit and purl over purl.

ASSEMBLY OF DOUBLE NECK EDGE:
Fold the rib down on inside of garment. Fasten rib to get a double neck edge of approx. 4-4-4-4½-4½-5-5 cm. To avoid a tight neck edge that sticks out it is important to keep the seam elastic.

Diagram

Diagram for DROPS 273-17

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!
Have you finished this pattern?
Tag your pictures with #dropspattern #moonreflectionsweater or submit them to the #dropsfan gallery.

Post a comment to pattern DROPS 273-17

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (4)

country flag Linda wrote:

Hi. The images are not showing for all the patterns. How can I fix this please?

11.11.2026 - 07:26

country flag Batteau wrote:

En couleur blanc ou noir

08.11.2026 - 17:54

country flag Rachael wrote:

Also, the instruction, ‘AFTER 7th ROW’ prior to YOKE, doesn’t mention if or when you should join in the round. However, the first instruction for ‘YOKE’ says ‘work in stocking stitch in the round’. Does this mean I should just knit across the gap to join the peice, or am I suppose to join in the round prior to moving the stitches from left needle to right needle by?

21.10.2026 - 22:56

DROPS Design answered:

Hi Rachel, You cut the strand, then move the stitches from the left to the right needle so the first round begins at the correct place (right back shoulder), so this is done before beginning to work in the round. Regards, Drops Team.

22.10.2026 - 05:38

country flag Rachael wrote:

Hi, please can you help me with the instruction ‘AFTER 7th ROW’ prior to starting YOKE. I currently have last 10 CO STS (size M) at the top of my left needle with 4th marker, indicating right side of front neck, below. Do I need to turn the work, so these STS and marker are sitting on the right needle instead of the left? Then I can move the sts before and after 1st marker, indicating left sleeve, over from the left needle to the right?

21.10.2026 - 21:09

DROPS Design answered:

Dear Rachael, after you have cast on the 10 sts for neck, cut the yarn and slip the stitches on left needle onto right needle: end of front piece (left shoulder), left sleeve, back piece until 3rd marker = between back piece and right sleeve, now join the yarn and start in the round from here. Happy knitting!

22.10.2026 - 09:27