DROPS Super Sale - SAVE 30% on 6 yarns all June!

Put sleeve (round on needle) together with front and back piece.

Video thumbnail for Put sleeve (round on needle) together with front and back piece.
Put sleeve sts (which has been worked in the round on needle) on the same circular needle as front and back piece. When you work on a circular needle and should work raglan or round yoke, start by working body, i.e. front and back, until armholes. On next round bind off 4 sts for armhole each side (or number of sts told in pattern). Now work the sleeves, bind off 4 sts for armhole (or number of sts told in pattern) for sleeve cap. Then put sleeve sts on the same circular needle where sts where bound off for armhole each side.

In the video we show a front and back piece where we have bound off for arm hole at the side, and then how to work the sleeve sts on to the same circular needle.
The sleeve has been worked in the round on a circular needle or double pointed needles.

To see a pattern with this technique, see: DROPS 146-17 or one of the picture to the left.

Patterns using this technique

DROPS 145-17

DROPS 145-17
Change language:

Video #335, listed in: Learn to knit, Knitting Yoke Techniques, Raglan

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Kody Doisy wrote:

Bonjour a propos de cette video comment placer les manches avec le dos et le devant SVP ? jersey contre jersey mais dans quel sens ? Tres beaux modeles mais toujours du mal a comprendre . Merci de votre reponse

27.06.2015 - 16:51

DROPS Design :

Bonjour Kosy Doisy, on place en général les mailles des manches sur la même aiguille circulaire que le dos et le(s) devant(s) sur l'endroit, en fonction du modèle (cf explications), on va tricoter le 1er rang soit sur l'endroit, soit sur l'envers - si on tricote en rond, le 1er tour sera sur l'endroit. Bon tricot!

29.06.2015 - 11:45

Country flag Emília Oliveira wrote:

Muito obrigada pelos vossas informações. Têm-me sido muito úteis.

17.04.2015 - 12:52

Country flag Pam wrote:

Thanks for this video. I am working one of your designs and am almost at this point. I was a little confused on how this would work. Seems pretty straight forward.

01.03.2015 - 21:59

Country flag Florence Jubier wrote:

Bonjour, quand je procède de cette manière, je trouve que ça "coince" pour tricoter les manches. est-ce normal ? peut-on l'éviter ? comment ? là je tricote le modèle 145-17, 420m sur aig circ de 80cm. merci pour votre réponse. hello, when I knit body and sleeves in the round, it's really tight for the sleeves stitches. is it normal ? possible to avoid ? how ? my project is model 145-17, 420st for a 80cm circ needle. thank you for your answer. Florence

24.02.2015 - 13:33

DROPS Design :

Bonjour Mme Jubier, vous pouvez éventuellement répartir vos mailles sur 2 aiguilles circulaires et les doubles pointes pour les manches pendant quelques tours, ou bien tricoter sur 2 aiguilles circulaires ( voir vidéo ici). Bon tricot!

24.02.2015 - 16:47

Country flag Petite Mie wrote:

Très intéressant. Justement, je me demandais si c'était possible. Je vais essayer sur l'ouvrage que j'ai commencé - un gilet fait d'un seul tenant pour les devants et le dos - je viens d'arriver aux emmanchures... donc j'arrête et je commence mes manches. Merci pour cette vidéo.

17.03.2014 - 13:39

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for European yoke - Short overview. Neck is finished after the stitches for sleeves are knitted up
4:54
European yoke - Short overview. Neck is finished after the stitches for sleeves are knitted up

In this DROPS video we show a brief overview of how to knit a garment with an European yoke, where the neck is finished after the stitches for the sleeves are knitted up. The garment is worked as follows, according to these 5 steps: 1) BACK PIECE: Cast on stitches for the back of the neckline and work the back piece top down, at the same time as increasing each side until you have reached the correct shoulder-width. The back piece has slightly diagonal shoulders. 2) FRONT PIECE: The front piece is worked in 2 pieces (each side of the neck). Start by knitting up stitches along one shoulder on the back piece. Work the front piece top down, at the same time as increasing for the neckline. Repeat for the second front piece along the other back shoulder. 3) YOKE: On the next row, place all stitches on the same circular needle as follows: Work across one front piece, pick up stitches for the sleeve along the side of the front piece, work across the back piece, pick up stitches for the sleeve along the side of the second front piece, work across the second front piece. The yoke is continued back and forth across all stitches, with the rows starting and ending mid-front. 4) INCREASE FOR NECK, BODY AND SLEEVES: While working the yoke, begin by increasing only for the neckline and sleeves, then subsequently for both the body and sleeves. Once the final increase for the neckline is done, the 2 front pieces are joined mid-front and the piece is continued in the round. 5) BODY AND SLEEVES: When all the increases are finished and the yoke has been worked to the correct length, it is divided for the body and sleeves. The body is continued in the round with a circular needle, top down, while the sleeves wait.
Video thumbnail for European yoke 4/4 – Neck is finished after the stitches for sleeves are knitted up
10:39
European yoke 4/4 – Neck is finished after the stitches for sleeves are knitted up

In this DROPS video, we show you how to increase for the sleeves and for the front and back pieces when working a European yoke while, at the same time, casting on stitches under each sleeve. When all the increases are finished and the yoke is the correct length, it is divided for the body and sleeves. The body is continued in the round with circular needle, top down, while the sleeves wait. Work as follows: ROUND 1: Knit all stitches (we only show the beginning and end of this round). ROUND 2: Knit until there are 2 stitches left before the first marker, increase towards the right, knit 2, move the marker onto the right needle, increase towards the left, knit across the sleeve-stitches, increase towards the right, move the marker onto the right needle, knit 2, increase towards the left, knit until there are 2 stitches left before the next marker, increase towards the right, knit 2, move the marker onto the right needle, increase towards the left, knit across the sleeve-stitches, increase towards the right, move the marker onto the right needle, knit 2, increase towards the left, knit to end of round (= 1 stitch increased on each side of 2 stitches in each transition between body and sleeves = a total of 8 increased stitches). Repeat these 2 rounds the stated number of times in your pattern. The piece now measures X cm measured down the middle of the sleeve, from where stitches were knitted up, when the sweater is folded double at the shoulder. The piece measures X cm outermost along the armhole. Work to the first marker (= transition between front piece and left shoulder). Now divide the yoke for the body and sleeves, casting on stitches under both sleeves. Follow your pattern for how many stitches are placed on a thread, how many stitches are cast on and how you continue the body. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You need to read your chosen pattern and work the correct number of stitches. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 3/4 Neck is finished after the stitches for sleeves are knitted up
15:23
European yoke 3/4 Neck is finished after the stitches for sleeves are knitted up

In this DROPS video we show how to work a European yoke and when front and back pieces are work for the desired length, stitches are knitted up for sleeves and all these pieces are worked simultaneously together. At the same time continue to increase for neck and sleeves, then towards the front pieces and the back piece. When the increases for the neck are done, cast on stitches between the front pieces and continue working in the round. Work like this: ROW 1 (right side): From the right side work as follows, starting with the left front piece: Knit 3, increase 1 stitch towards the left (read INCREASE TIP-1 below), knit the remaining stitches on the left front piece, insert 1 marker, knit up 11 stitches along the side of the left front piece, insert 1 marker, knit across the back piece, insert 1 marker, knit up 11 stitches along the side of the right front piece, insert 1 marker, knit across the right front piece until there are 3 stitches left, increase 1 stitch towards the right (read INCREASE TIP-1 below), knit 3. ROW 2 (wrong side): Purl all stitches (we only show the beginning and end of this row). ROW 3 (right side): Knit to the first marker (= left front piece), move the marker onto the right needle, increase 1 stitch towards the left, knit 11, increase 1 stitch towards the right, move the marker onto the right needle, knit to the next marker (= back piece), move the marker onto the right needle, increase 1 stitch towards the left, knit 11, increase 1 stitch towards the right, move the marker onto the right needle, knit to end of row (= right front piece), finish the row by casting on 13 stitches for the neckline. Now continue in the round. ROUND 1: Knit all stitches (we do not show this round). ROUND 2: Knit all stitches and increase 2 stitches for each sleeve as before. The number of stitches on each sleeve increases but the number of stitches on the front and back pieces stays the same. Work these 2 rounds 8 times. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You need to read your chosen pattern and work the correct number of stitches. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 2/4 – Shoulders - Neck is finished after the stitches for sleeve are knitted up
11:35
European yoke 2/4 – Shoulders - Neck is finished after the stitches for sleeve are knitted up

In this DROPS video, we show you how to knit up stitches along the shoulders on the back piece when working a European yoke – the neckline is finished after the stitches for the sleeves are knitted up. The 2 front pieces are worked on either side of the neckline. We show you how to knit up 1 edge stitch + 14 stitches along the back right shoulder, then you continue with stockinette stitch. When the piece measures 7 cm= 2¾" stitches are increased for the neckline, read INCREASE TIP-1 TOWARDS THE RIGHT below. We show 2 increases. At the end of the last row, we decrease the last stitch (the edge stitch). The right shoulder stitches are then placed on a stitch holder. The left front shoulder is knitted up and worked in the same way but in reverse (read description in your pattern). INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through the back loop. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through the front loop. Yarn used: DROPS Andes. You can find pattern using this technique and more related videos below.
Video thumbnail for European yoke 1/4 – Back piece
6:56
European yoke 1/4 – Back piece

In this DROPS video, we show you how to work the back piece on a garment with a European yoke. The neckline is finished after the stitches for the yoke are knitted up. We show you how to increase stitches for the shoulders. Cast on stitches for the back of the neckline and work the yoke back and forth, top down, while increasing each side until the number of stitches for the required shoulder width are achieved. The back piece has slightly diagonal shoulders. We show 4 increase-rows as follows: ROW 1 (wrong side): Purl. ROW 2 (right side): Read INCREASE TIP-1. Knit 3, increase 1 stitch towards the left, knit until there are 3 stitches left on the row, increase 1 stitch towards the right, knit. 3.ROW 3 (wrong side): Read INCREASE TIP-2. Purl 3, increase 1 stitch towards the left, purl until there are 3 stitches left on the row, increase 1 stitch towards the right, purl 3. AFTER ROW 3: Work ROWS 2 and 3 a total of 7 times. Cut the strand. Place the stitches on a stitch holder. INCREASE TIP-1: INCREASE 1 STITCH TOWARDS THE LEFT – from right side: Use the left needle to pick up the front strand between 2 stitches from the previous row, knit through from the back. INCREASE 1 STITCH TOWARDS THE RIGHT – from right side: Use the left needle to pick up the back strand between 2 stitches from the previous row, knit through from the front. INCREASE TIP-2: INCREASE 1 STITCH TOWARDS THE LEFT – from wrong side: Use the left needle to pick up the back strand between 2 stitches from the previous row, purl through from the front. INCREASE 1 STITCH TOWARDS THE RIGHT – from wrong side: Use the left needle to pick up the front strand between 2 stitches from the previous row, purl through from the back. Yarn used: DROPS Andes. You can find pattern using this technique and more related videos below.
Video thumbnail for How to knit up stitches for the neck to a sweater with European shoulder
6:35
How to knit up stitches for the neck to a sweater with European shoulder

In this DROPS video we show how to knit up stitches around the neck to a sweater with a European shoulder, using a knitting needle or a crochet hook. Then follow the description in the pattern. There are many different ways to work a rib (e.g knit 1 / purl 1, knit 2 / purl 2, knit 1 twisted / 1 purl etc.). And you can work a single neck, double neck or a high neck. In this video we work a double neck with a rib worked like this: knit 2, purl 2, bind off with knit over knit and purl over purl and then fold the neck double to the inside and fasten down. In this video we work with 2 yarn qualities: DROPS Lima color no. 9029 sage green and DROPS Kid-Silk color no. 45 soft mint, needle size 5 MM = US 8. You must read a pattern to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.