DROPS Super Sale - SAVE 30% on 6 yarns all June!

How to start working the vest in DROPS 210-4

Video thumbnail for How to start working the vest in DROPS 210-4
In this DROPS video we show how we start working a garment in English rib after charts, like the Mountain Moraine vest in DROPS 210-4 and the Easy Over vest in DROPS 217-13. We already have worked the neck to 210-4, but we work with fewer stitches than it says in the pattern (the neck in 217-13 is longer). We start the video by showing round 1 where the chart A.1, A.2 and A.3 is worked. We use stitch markers between each chart to get a better overview. Work pattern as follows: A.1 (= 2 stitches) over the first 4 stitches (= half back piece), A.2 (= 2 stitches), A.1 over 6 stitches, A.3 (= 2 stitches = shoulder), A.1 over 8 stitches (= front piece), A.2 over 2 stitches, A.1 over 6 stitches, A.3 over 2 stitches (= shoulder) and A.1 over the last 4 stitches (= half back piece). In this video we show round 1- 8, see also video Part 2. These vestes are worked in DROPS Air, but in the video we use a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find patterns by clicking on one of the pictures below and other relevant videos.

Patterns using this technique

DROPS 217-14

DROPS 217-14
DROPS 217-13

DROPS 217-13
DROPS 210-4

DROPS 210-4
Change language:

Video #1528, listed in: Saddle shoulder

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Lone wrote:

Hej Hvordan får jeg lyd på videoen? Mvh Lone

16.01.2021 - 20:47

DROPS Design :

Hei Lone. Vi har ikke lyd på våre videoer. Du finner tekstforklaring til videoene under selve videoen eller link (bilde) til oppskriften det gjelder. Slik står det under videoen: Du må også lese oppskriften og se på diagrammene i tillegg til å se videoen. Du finner oppskriften ved å klikke på bildet under. mvh DROPS design

18.01.2021 - 08:58

Country flag Margrethe Hammersland wrote:

Hei har nå strikket til jeg har 144 masker og skal til med delingen til forstykket, bakstykket og skulderen. Da har jeg et spørsmål, hvor skal jeg starte , når jeg skal strikke 28 masker patent 1 maske rille osv. Jeg har jo hele tiden startet med A1 over de første 6 maskene.

12.01.2021 - 10:24

DROPS Design :

Hei Margrethe. Diagrammene er patentmønstret. A.2 og A.3 viser hvordan det økes i patentmønstret og A.1 er patentmønstret uten økning. Forklaringen står øverst i oppskriften. Så når det står strikk 28 masker patent, strikker du 28 masker av A.1, og deretter 1 maske i rille. God Fornøyelse!

25.01.2021 - 10:11

Country flag Julie wrote:

I want to make the Mountain Moraine 210-4 in the heavier yarn used in the demonstration. Can I just make a smaller size to keep the proportion? My gauge was way off with only 18 rows to 4 inches and 14 stitches wide if you count the slip and yarn over as separately separate stitches. Thank you.

04.01.2021 - 19:58

DROPS Design :

Dear Julie, we are unfortunately not able to adjust every pattern to every single request - for any further assistance adjusting to your gauge, you are welcome to contact your DROPS store - even per mail or telephone. Thanks for your comprehension. Happy knitting!

05.01.2021 - 13:22

Country flag Lise Strømsvik wrote:

Det er synd å si, men Drops tar ikke spørsmålene og uklarhetene på alvor. Oppfordrer Drops til å svare med respekt for spørsmålsstillerne.

12.12.2020 - 22:50

Country flag Yvonne wrote:

Kan ikke få lyd på hjælpe videoer

11.12.2020 - 16:09

Country flag Anna wrote:

Hei igjen! Dette er IKKE svar på mitt spørsmål! Jeg har ALLEREDE strikket A.1a over A.1a alle gangene, slik som gjøres i videoen. Mitt spørsmål er: ETTER at jeg har strikket A.1a så skal jeg iflg oppskriften som følger diagrammet, strikke A.2 og A.3 «en gang i høyden.» Hvor skal jeg da begynne? Er det RAD NR. 9 og 10 på A.2 og A.3?

09.12.2020 - 21:08

Country flag Anna wrote:

Hei igjen! Dette er IKKE svar på mitt spørsmål! Jeg har ALLEREDE strikket A.1a over A.1a alle gangene, slik som gjøres i videoen. Mitt spørsmål er: ETTER at jeg har strikket A.1a så skal jeg iflg oppskriften som følger diagrammet, strikke A.2 og A.3 «en gang i høyden.» Hvor skal jeg da begynne? Er det RAD NR. 9 og 10 på A.2 og A.3?

09.12.2020 - 21:04

Country flag Ellinor Lie wrote:

Da har jeg endelig fått svar på mitt første spørsmål. Dessverre er det bare det samme svaret alle ser ut til å få. Det er aldri feil med AVSNITT i en oppskrift og heller ikke å fjerne tegn for rett og vrangside når det gjelder halsdelen. Da strikker man Mountain rundt og ikke fram og tilbake. Det forvirrer især uerfarne strikkere. Jeg har strikket i 65 år, minst og også modeller og for salg. Likefullt slet jeg kraftig her!

09.12.2020 - 12:48

Country flag Anna wrote:

Hei, jeg ser at dere har redigert videoen, men det dere har gjort er kun å fjerne slutten Etter A.1a, der hvor det pekes ( feilaktig) på A.2 og A.3 nederst. Dette hjelper ikke for det jeg lurer på er: hvor skal man fortsette etter å strikket 4 rader med A.1a ? Skal jeg begynne på rad 9 på A.2 ? Dette har jeg spurt om flere ganger uten å få svar.

07.12.2020 - 21:55

DROPS Design :

Hei Anna. Vi har ikke fjernet slutten på videoen, kun fjernet der det var pekt. Under BÆRESTYKKE og når du har strikket A.1 1 gang i høyden, repeteres A.1a videre i høyden. Altså A.1a over A.1a (og når du har strikket A.1a enda en gang, strikker du A.1a over A.1a igjen og dette gjentas). mvh DROPS design

09.12.2020 - 12:13

Country flag Ellinor Lie wrote:

Flere feil følger. Når man deler arbeidet i for og bakstykke, ender man opp med noen snodigheter i forhold til patentmaskene der det var omgangsskifte over skulderdelen, Lurer på om denne er prøvestrikket av en som kan strikke patent både fram og tilbake og rundt?

30.11.2020 - 18:21

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

Continue watching

Video thumbnail for How to start working a garment in English rib after charts - Part 2
17:11
How to start working a garment in English rib after charts - Part 2

In this DROPS video we show how to continue working after charts A.1, A.2 and A.3 used in the Mountain Moraine vest in DROPS 210-4 and the Easy Over vest in DROPS 217-13. We have already worked chart A.1 once in height and now only A.1a is repeated over A.1 in height. In the video we show how to work round 9. (increase round) and round 10, then we work round 15 (increase round) and round 16. Then we work A.2a over A.2 and A.3a over A.3 (we show the first round of A.2a and A.3a). When all the increases are finished (read the pattern for the number of increases), work A.1a over all stitches until the work has the correct measurements (read the pattern for measurements). Adjust so the next round is purled. These vests are worked in DROPS Air, but in the video we use a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find patterns by clicking on one of the pictures below and other relevant videos.

You might also like

Video thumbnail for How to work saddle shoulders with pouffe sleeves - back and forth
17:52
How to work saddle shoulders with pouffe sleeves - back and forth

In this DROPS video we show how we work the beginning to the saddle shoulders with pouffe sleeves, working back and forth, like it is worked in the “White Water Jacket” in DROPS 222-26. The same technique is used in the "White Water" sweater in DROPS 222-25 - even if beginning of the piece is first worked in the round. We use the stitch numbers in the smallest size and we have already worked the neck edge (3 cm = 1 1/8"). We start the video by showing which stitches are set on a thread (front pieces and back piece). The saddle shoulders are worked separately. Read in the pattern under SADDLE SHOULDERS how it is worked. This jacket is worked in 2 threads DROPS Kid Silk but in the video, we use 1 thread DROPS Air. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to work saddle shoulder increase back and forth
9:45
How to work saddle shoulder increase back and forth

In this DROPS video we show how to work saddle shoulder increase back and forth, both from right side and wrong side. We have put 4 markers in the piece and it increases like this: BEFORE MARKER (applies from right side): The stitch is twisted towards the right. Use left needle to pick up thread between 2 stitches from row below, pick up thread from behind and knit stitch in front loop. AFTER MARKER: The stitch is twisted towards the left. Use left needle to pick up thread between 2 stitches from row below, pick up thread from front and knit stitch in back loop. BEFORE MARKER (applies from wrong side): The stitch is twisted towards the right. Use left needle to pick up thread between 2 stitches from row below, pick up thread from front and purl stitch in back loop. AFTER MARKER: The stitch is twisted towards the left. Use left needle to pick up thread between 2 stitches from row below, pick up thread from behind and purl stitch in front loop. We use the yarn DROPS Snow in the video. You must read a pattern and if necessary, look at the charts to be able to follow this video properly. You’ll find a pattern using this technique by clicking on one of the pictures below.
Video thumbnail for How to work a body with English rib together again
11:46
How to work a body with English rib together again

In this DROPS video we show how we work a body together again in English rib after binding off stitches for sleeve opening, as it is done in the Mountain Moraine vest in DROPS 210-4. We have a fewer number of stitches than what is written in the pattern. Work front piece according to chart A1a, (work garter stitches now as 1st stitch in A.1a), cast on new stitches under 1st sleeve, work back piece after the same chart (A.1a), cast on new stitches under 2nd sleeve / at the end of the round. Now work A.1a in the round over all the stitches. On the first round work the 3 cast-on stitches under each sleeve without yarn overs. This vest is worked in DROPS Air, but in the video we use a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find the pattern by clicking on the pictures below and other relevant videos.
Video thumbnail for How to divide a piece for front and back pieces and how to bind off shoulder stitches in English rib
8:38
How to divide a piece for front and back pieces and how to bind off shoulder stitches in English rib

In this DROPS video we show how to divide a piece for front and back pieces and how to bind off shoulder stitches, as done in vests in DROPS 210-4 and 217-13. In the Slippery Slopes Sweater in 217-14 we dont bind off the stitches for the sleeve opening, but put the shoulder stitches on a thread. We have fewer stitches than what is written in the patterns. Start in the middle of the back and work the number of stitches written in the pattern, we work 13 stitches in English rib, 1 stitch in garter stitch (K1), then bind off stitches for the 1st sleeve opening (yarn overs are bind off as separate stitches to avoid the bind-off edge being tight). Work English rib over the front piece, 1 garter stitch (K1), bind off to the 2nd sleeve opening, 1 garter stitch(K1) and then work English rib rest of the round. Cut the strand. Allow the other stitches to remain on the needle.Work from RS (the stitches must now be moved to the left side of the needle). Work as follows from RS: 1 garter stitch (K1), A.4 until 1 stitch remains and finish with 1 stitch in garter stitch (K1). Work like this back and forth to the stated size in the pattern (make sure that the last row is from WS). Work the front piece the same as the back piece (the stitches are moved to the left needle). These vests are worked in DROPS Air, but in the video we use a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find patterns by clicking on one of the pictures below and other relevant videos.
Video thumbnail for How to start working a garment in English rib after charts - Part 2
17:11
How to start working a garment in English rib after charts - Part 2

In this DROPS video we show how to continue working after charts A.1, A.2 and A.3 used in the Mountain Moraine vest in DROPS 210-4 and the Easy Over vest in DROPS 217-13. We have already worked chart A.1 once in height and now only A.1a is repeated over A.1 in height. In the video we show how to work round 9. (increase round) and round 10, then we work round 15 (increase round) and round 16. Then we work A.2a over A.2 and A.3a over A.3 (we show the first round of A.2a and A.3a). When all the increases are finished (read the pattern for the number of increases), work A.1a over all stitches until the work has the correct measurements (read the pattern for measurements). Adjust so the next round is purled. These vests are worked in DROPS Air, but in the video we use a thicker yarn; DROPS Snow. You must read the pattern and look at the charts to be able to follow this video properly. You’ll find patterns by clicking on one of the pictures below and other relevant videos.
Video thumbnail for How to increase for the yoke for a garment with a saddle shoulder
5:50
How to increase for the yoke for a garment with a saddle shoulder

In this DROPS video we show how to increase for the yoke for a garment with saddle shoulder by increasing 8 stitches on one round. This technique is used in the "Country Muse" sweater in DROPS 216-40 and the "Country Muse Cardigan" jacket in DROPS 216-39. We have already worked a neckline, increases for saddle shoulders and sleeve and start the video by moving sleeve markers to the stitches where increase for the yoke should be. Increase like this: Start before the marker-stitch, use left needle to pick up strand between 2 stitches from the row below, pick up strand from behind and knit stitch in front loop, work marker-stitch in stocking stitch as before, use left needle to pick up strand between 2 stitches from the row below, pick up strand from the front and knit stitch in back loop (= 1 stitch increased on each side of the marker-stitch). The sweater in DROPS 216-40 and the jacket in DROPS 216-39 are worked in DROPS Lima, but in the video we use a thicker yarn; DROPS Snow. You must read a pattern to be able to follow this video properly. You’ll find a pattern using this technique by clicking on one of the pictures below.