DROPS / 210 / 19

Mint Tea Sweater by DROPS Design

Knitted jumper with raglan in DROPS Paris. The piece is worked top down with lace pattern. Sizes XS - XXL.

DROPS Design: Pattern no w-805
Yarn group C or A + A
-------------------------------------------------------

SIZES:
XS - S - M - L - XL - XXL

MATERIALS:
DROPS PARIS from Garnstudio (belongs to yarn group C)
400-400-450-500-550-600 g colour 21, mint green

KNITTING TENSION:
16 stitches in width and 20 rows in height with stocking stitch = 10 x 10 cm.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 5.5 MM.
DROPS CIRCULAR NEEDLE SIZE 5.5 MM: Length 40 cm and 80 cm for stocking stitch.
DROPS DOUBLE POINTED NEEDLES SIZE 4.5 MM.
DROPS CIRCULAR NEEDLE SIZE 4.5 MM: Length 40 cm and 80 cm for rib.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Cotton
from 0.95 £ /50g
DROPS Paris uni colour DROPS Paris uni colour 1.05 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Paris recycled denim DROPS Paris recycled denim 0.95 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 7.60£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

PATTERN TIP: 
See diagrams A.1 and A.2.

INCREASE TIP-1 (evenly spaced):
To work out how to increase evenly, count the total number of stitches on the needle (e.g. 16 stitches) and divide by the number of increases to be made (e.g. 4) = 4. 
In this example, increase by making 1 yarn over after each 4th stitch. On the next round work the yarn overs twisted to avoid holes.

INCREASE TIP-2 (for sides of body):
Work until there are 2 stitches left before the marker thread, make 1 yarn over, knit 4 (marker thread sits between these 4 stitches), 1 yarn over.
On the next round knit the yarn overs twisted to avoid holes. Then work the new stitches in stocking stitch. 
DECREASE TIP (for sleeves): 
Decrease 1 stitch on each side of the marker thread as follows: Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (= 2 stitches decreased).

CASTING-OFF TIP:
To avoid the cast-off edge being tight you can cast off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 4th stitch at the same time as casting off and the yarn overs are cast off as normal stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JUMPER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, top down from mid back. The yoke is divided for body and sleeves and the body continued in the round with circular needle. The sleeves are worked in the round with double pointed needles, top down.

NECK:
Cast on 80-84-88-92-96-104 stitches with circular needle size 4.5 mm and Paris. Knit 1 round. Work rib (= purl 2, knit 2) for 3 cm, then change to circular needle size 5.5 mm.
Insert 1 marker at the beginning of the round (= mid back); the yoke will be measured from this marker!

YOKE:
The next round is worked as follows:
Knit 12-12-16-16-16-20 and increase 0-2-0-4-4-3 stitches evenly spaced over these stitches – read INCREASE TIP-1 (= half back piece), work A.1 (= 3 stitches), knit 8, work A.1 over 3 stitches (= right sleeve), knit 26-30-30-34-34-38 and increase 0-0-0-8-8-6 stitches evenly spaced over these stitches (= front piece), A.1 over 3 stitches, knit 8, work A.1 over 3 stitches (= left sleeve), knit 14-14-14-14-18-18 stitches and increase 0-2-0-4-4-3 stitches evenly spaced over these stitches (= half back piece) = 80-88-88-108-112-116 stitches.
The markers in A.1 follow your work onwards, to make repeating A.1 in height easier. On round 2 a total of 8 stitches are increased in A.1.
REMEMBER THE KNITTING TENSION!
When A.1 has been completed 1 time, repeat A.1 in height (the markers mark the middle of A.1 in each repeat).
When A.1 has been repeated a total of 6-6-7-7-8-9 times in height there are 224-232-256-276-304-332 stitches on the needle.
Continue knitting in the round until the piece measures 19-19-22-23-25-28 cm from the marker.
Now divide the piece for body and sleeves as follows:
Knit 33-34-39-40-44-49, place the next 46-48-50-58-64-68 stitches on a thread for the sleeve, cast on 6 stitches under the sleeve, knit 66-68-78-80-88-98, place the next 46-48-50-58-64-68 stitches on a thread for the sleeve, cast on 6 stitches under the sleeve and finally knit 33-34-39-40-44-49.

BODY:
= 144-148-168-172-188-208 stitches. Insert 1 marker thread in the middle of the 6 stitches on each side of the piece (= in sides of body). There are 72-74-84-86-94-104 stitches between the threads on both the front and the back pieces.
Allow the threads to follow your work onwards; they will be used when increasing in the sides.
Knit.
When the piece measures 2 cm from the division, increase 1 stitch on each side of both marker threads – read INCREASE TIP-2 (= 4 stitches increased).
Increase like this every 4 cm a total of 5 times = 164-168-188-192-208-228 stitches.
When the piece measures 20-22-21-22-22-21 cm work A.2 (= 4 stitches) over all stitches.
When A.2 has been worked 1 time in height, change to circular needle size 4.5 ,mm and work rib (= knit 2, purl 2). Cast off when the piece measures 27-29-28-29-29-28 cm from the division – read CASTING-OFF TIP!
The jumper measures approx. 50-52-54-56-58-60 cm from the shoulder down.

SLEEVE:
Place the 46-48-50-58-64-68 stitches from the thread on the one side of the piece on double pointed needles size 5.5 mm and knit up 1 stitch in each of the 6 stitches cast on under the sleeve = 52-54-56-64-70-74 stitches. Insert a marker thread in the middle of the 6 stitches under the sleeve. Allow the thread to follow your work onwards; it will be used when decreasing under the sleeve. Work stocking stitch in the round.
When the piece measures 2 cm from the division, decrease 1 stitch on each side of the marker thread – read DECREASE TIP.
Decrease like this every 5-7-5-3-1½-1½ cm a total of 4-3-4-6-9-9 times = 44-48-48-52-52-56 stitches.
When the piece measures 22-22-20-20-18-16 cm from the division, work A.2 over all stitches.
When A.2 has been worked 1 time in height change to double pointed needles size 4.5 mm.
Work rib (= knit 2, purl 2).
Cast off with knit when the sleeve measures 29-29-27-27-25-23 cm from the division.
Work the other sleeve in the same way.

Diagram

= knit
= between 2 stitches make 1 yarn over
= insert 1 marker in this stitch; allow it to follow your work onwards; it marks the middle of A.1 when A.1 is repeated in height
= knit 2 together

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 210-19) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (15)

S P 24.03.2020 - 03:57:

I do not understand the pattern instructions after the 1st A1 and the 1st row increases. Is that 1st row repeated 8 times ? Help!!!\r\n\r\nThanks so much.

DROPS Design 24.03.2020 kl. 10:08:

Dear SP, after you have worked A.1 one time in height, repeat A.1 in height - make sure to let the markers in A.1 follow so that it will be easier to repeat A.1. After A.1 has been worked one time in height, there are 9 stitches in each A.1, on next round, work A.1 once again over the middle 3 sts of these 9 stitches. Happy knitting!

Else Kjos 12.03.2020 - 12:24:

Strikker Mint Tea Sweater . Har strikka mye i mitt liv men hva i alle dager er dei 4 cm i diagrammet ( nr 2 av tall på v side etter dei 3 cm med hals . Står jo ingen plass at det skal strikkes 4 cm før hullmønster der markøren blir satt . Strikker M og da tolker eg lengde fra der halsen slutter og ned til der arm begynner som 22 cm . Mangler eg da 4 cm eller hva er dei 4 cm . Håper på rask tilbakemelding . TAKK

DROPS Design 18.03.2020 kl. 15:14:

Hej Else, Jeg kan ikke se hvor du er i opskriften. Hvad mener du med 4 cm i diagrammet? Har du spørgsmål til diagrammet? Eller hvor er du i opskriften?

Carole Dietrich 07.03.2020 - 17:03:

The answer to my question about the stitch counts for all sizes (80-88-88-108-112-116) at the end of the second round is: The stitch counts are only for the increases and does not include the yarn overs. The stitch count for all sizes, including the yarn overs, would be: 88-96-96-116-120-124

Carole Dietrich 07.03.2020 - 06:35:

Sorry, I meant at the end of the yoke's first round.

Carole Dietrich 07.03.2020 - 06:30:

At the end of round 1, the pattern gives the stitch counts as: 80-88-88-108-112-116. Does this count include the increases and the yarn overs? I'm getting this count: 88-96-96-116-120-124.

DROPS Design 07.03.2020 kl. 13:37:

Hi Carole, The stitch counts given are for all the sizes, so the first number is for size S, the second for size M and so on. So you use the number which corresponds to the size you are knitting. Happy knitting!

Monica 17.02.2020 - 14:06:

Grazie per la precedente risposta, ma il mio dubbi rimane. Nella descrizione degli aumenti è scritto "Sul giro successivo lavorare i gettati a ritorto per evitare buchi" ma voi nella risposta mi dite di lavorare il ritorno NON ritorto perchè si devono formare i buchi. Potete verificare? Grazie davvero per il supporto

DROPS Design 17.02.2020 kl. 14:30:

Buongiorno Monica. I buchi sul raglan sono i gettati del diagramma. Questi gettati non vanno lavorati ritorti. Quando aumenta a intervalli regolari e ai lati del corpo, deve lavorare la maglia gettata ritorta. Buon lavoro!

Monica 14.02.2020 - 18:37:

Ho un dubbio, nella foto si vede che il raglan ha i buchi ma nella spiegazione è indicato di fare i ritorti nel giro di ritorno per evitare i buchi .... E' corretto? Grazie

DROPS Design 17.02.2020 kl. 12:45:

Buongiorno Monica. I gettati del diagramma vanno lavorati non ritorti perchè si deve formare un buco. Segue le indicazioni riportate nei paragrafi: suggerimento per gli aumenti, quando vengono richiamati nel testo (quindi per gli aumenti a intervalli regolari e quelli ai lati dei segnapunti). Buon lavoro!

Carmen 13.02.2020 - 09:40:

Perdón, entendí mal el dibujo del marcador. Mil disculpas.

Carmen 12.02.2020 - 08:08:

Buenos días. Creo que hay un error en A1, en la foto se ven 3 agujeros a cada lado y no 2 (raglán). Falta una vuelta con: 1 hebra entre dos puntos, 7 puntos, 1 hebra entre dos puntos. Con estas vueltas en A1 sí que salen las cuentas de los puntos aumentados. También hay un error en el canesú: ... 26-30-30-34-34-38 derechos y aumentar 0-0-0-8-8-6 puntos repartidos sobre 3 puntos (= delantero). Debería decir ....0-0-0-8-8-6 puntos repartidos sobre estos puntos (= delantero). Saludos

Monique Debray 07.02.2020 - 17:45:

Bonjour, Je n'arrive pas à trouver sur votre site un tableau de mesures suivant les différentes tailles. Merci de m'indiquer où je peux le trouver. Merci d'avance.

DROPS Design 10.02.2020 kl. 07:32:

Bonjour Mme Debray, il n'en existe pas car nos modèles remontent aux années 80, la mode évolue et de plus, les normes varient d'un pays à l'autre. Mesurez un vêtement que vous avez et dont vous aimez la forme et comparez ces mesures à celle du schéma, vous trouverez ainsi la taille idéale à suivre. plus d'infos ici. Bon tricot!

Post a comment to pattern DROPS 210-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.