DROPS Extra / 0-1221

Earthling by DROPS Design

Knitted DROPS poncho with hood and fringes, worked top down in ”Polaris”. Size: S - XXXL.

DROPS design: Pattern no po-078
Yarn group F or E + E
----------------------------------------------------------
Size: S/M - L/XL - XXL/ XXXL
Length mid front: approx. 52 - 54 - 56 cm (without fringes)
Materials:
DROPS POLARIS from Garnstudio
1000-1100-1300 g colour no 06, light beige

DROPS CIRCULAR NEEDLE (80 cm) SIZE 15 mm - or size needed to get 7 sts x 8 rounds in stocking st = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Wool
from 4.10 £ /100g
DROPS Polaris uni colour DROPS Polaris uni colour 4.10 £ /100g
Wool Warehouse Direct Ltd
Order
DROPS Polaris mix DROPS Polaris mix 4.70 £ /100g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 41.00£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INCREASE TIP:
Inc 1 st on each side of st with marker
Inc by making 1 YO - work YOs into rib.

RIB TIP:
To avoid the rib contracting the piece K 1 round over all sts after every 5th round with rib (adjust so that this is a round without inc).

GARTER ST (back and forth):
K all rows. 1 ridge = 2 rows K.

FRINGE TIP:
To make the fringes hang nicely on garment they should be moistened, shaken and dried before they are tied on.

TIP FOR CHANGING YARN:
When switching ball with Polaris, split the old strand in two on the last 15 cm – cut off one part, do the same on the new strand. Place the first and last 15 cm on top of each other so that the yarn is the normal thickness and continue to work – this is done to make the strand switch invisible in the yarn.
----------------------------------------------------------

PONCHO:
Worked in the round on circular needle from top down.
Cast on 36-36-48 sts on circular needle size 15 mm with Polaris. P 1 round, K 1 round, P 1 round and K 2 round. Insert 1 marker in 10th-10th-13th and in 28th-28th-37th st on needle (= mid front and mid back).
Work rib (= K 1/P 2) on round and inc 1 st on each side of K st with marker mid front and mid back – READ INCREASE TIP (= 4 sts inc). Continue rib - READ RIB TIP and repeat inc every other round - NOTE: Work the inc sts into rib, i.e. work the first K, work the next 2 P, work the next K and work the next 2 P etc. REMEMBER THE KNITTING TENSION AND READ TIP FOR CHANGING YARN. When poncho measures approx. 50-52-54 cm from neck (measures along mid front), K 1 round over all sts (inc mid front and mid back as before). P 1 round and then LOOSELY cast off with K while AT THE SAME TIME inc mid front and mid back as before (cast off the inc sts as regular sts).

HOOD:
Beg from RS mid front after st with marker and pick up 1 st in every st around the neck on circular needle size 15 mm with Polaris (do not work in st with marker mid front) = 35-35-47 sts on needle. K 3 rows back and forth and inc 5 sts evenly on 2nd row (= from RS) = 40-40-52 sts. Then work in stocking st with 2 sts in GARTER ST - see explanation above, in each side towards mid front until hood measures approx. 36-37-38 cm. Loosely cast off and sew hood tog at the top with grafting/kitchener sts.

FRINGES:
Fasten fringes in every other st along cast-off edge on poncho as follows - READ FRINGE TIP. Cut 1 strand Polaris of 40 cm, fold it double and pull the loop through a st and then pull yarn ends through the loop.

Diagram


Lene Bang 22.08.2019 - 12:17:

Det ville være fint om opskriften angav hvor meget garn der går til hætten. Ellers en fed opskrift

Sarah 29.06.2019 - 19:02:

Ich bin jetzt soweit fertig mit dem "Körper". Ich bin ziemlich groß, deswegen hab ich noch einige Runden mehr gestrickt, passt ganz gut:) Jetzt habe ich noch 1,5 Knäuel Wolle übrig. Reicht das für die Kapuze? Wie viel Wolle brauche ich noch dafür? Imsgesamt ein sehr schöner Poncho, ich freue mich schon den im Herbst/Winter tragen zu können:)

DROPS Design 01.07.2019 kl. 07:00:

Liebe Sarah, leider haben wir nur die gesamte Garnmenge für die gegebene Maßen, gerne können Sie Kontakt mit Ihrem Laden auf - auch telefonisch oder per E-mail, sie werden Ihnen gerne wal weiterhelfen. Viel Spaß beim stricken!

Cinzia 18.03.2017 - 22:52:

I have the same problem Anna has. I cannot keep the rib pattern by increasing 4 stitches. Anna, did you resolve it? Sorry I am not an expert. What am I missing ?

DROPS Design 20.03.2017 kl. 09:36:

Dear Cinzia, you have to work the inc sts in rib as before so that the rib will continue as before and you should always keep K1/P2. Mid st is a K st, on 1st inc, you will have to work the YOs K, then on next 2 inc work the YOs P (= you will have P2, K1, P2, mid st K, P2, K1, P2) and continue this way. Happy knitting!

Anna 14.11.2016 - 17:30:

Hello, I'm having a bit of trouble keeping the rib aligned, because the rib pattern is 3 stitches, while we increase by 4 every inc row. So the stitches with the markers don't stay K. Also, am I supposed to K/P the inc stitches the same every time? (K,PP,K). Thank you!

DROPS Design 15.11.2016 kl. 09:04:

Dear Anna, correct, inc sts on each side of the middle st on mid front and mid back should be worked in rib so that rib patterns continues. Happy knitting!

Regina Reifferscheid 03.10.2016 - 16:03:

Frage: Wie stricke ich GENAU das Rippenmuster bei den Zugaben? Komme nicht klar! Die markierte vordere und hintere Masche wird doch IMMER rechts gestrickt, oder und wie bringe ich da die Reihenfolge 1M re/ 2M li ein? Ich verstehe auch nicht, das nach jeder 5 Rippenmuster Rd, 1Rd. rechts gestrickt wird, da ich es auf dem Bild absolut nicht erkennen kann! Diese Anleitung ist leider sehr unübersichtlich. Würde mich sehr über eine genaue Erläuterung freuen ! Viele Grüße

DROPS Design 03.10.2016 kl. 16:54:

Liebe Frau Reifferscheid, Sie müssen die Bündchen so stricken: 1 M re/2 M li über die 9-9-12 ersten M, dann 1 M re (= Markierer), 2 M li/1 M re über die nächsten 17-17-23 M, 1 M re (= Markierer), 2 M li/1 M re über die letzten 8-8-11 M. Dann jede 5. Rd muss man 1 Rd re stricken so dass die Bündchen nicht so "eng" sind (so sichtlich ist es auch nicht).

Celia 13.08.2016 - 19:26:

¿Para tallas grandes xxl, como puedo sacar el patrón?es la primera vez que voy ha hacer uno y no se calcularlo. Si me resolvieran esta duda, estaría muy agradecida. Gracias y un saludo.

DROPS Design 14.08.2016 kl. 11:59:

Hola Celia, para la talla XXL tienes que mirar el último de los números cuando te indican los puntos que debes hacer. Por ejemplo, 36-36-38, tendrías que hacer el 38. Sin embargo si hay solo un número, ese es para todas las tallas.

Post a comment to pattern DROPS Extra 0-1221

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.