Candy Stripes Cardigan by DROPS Design

Knitted basic jacket in 2 strands DROPS Brushed Alpaca Silk. The piece is worked bottom up, with stripes. Sizes XS - XXL.

DROPS 231-1
DROPS Design: Pattern as-170
Yarn group C + C or E
-------------------------------------------------------

SIZES:
XS - S - M - L - XL – XXL

Finished measurements:
Chest measurements: 94-102-110-120-128-142 cm = 37"-40"-43 3/8"-47 1/4"-50 3/8"-55 3/4"
Full length: 50-52-54-56-58-60 cm = 19 3/4"-20 1/2"-21 1/4"-22"-22 3/4"-23 5/8"
All measurements in charts are in cm.

MATERIALS:
DROPS BRUSHED ALPACA SILK from Garnstudio (belongs to yarn group C)
75-75-75-100-100-100 g color 01, off white
25-25-25-25-25-25 g color 20, pink sand
25-25-25-50-50-50 g color 13, denim blue
25-25-25-25-25-50 g color 15, light sea green
25-25-25-25-25-25 g color 19, curry
25-25-25-25-25-25 g color 18, cerise
25-25-25-25-25-25 g color 07, red

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 8 MM = US 11: Length 80 cm = 32”.

KNITTING GAUGE:
11 stitches in width and 15 rows in height with stockinette stitch and 2 strands = 10 x 10 cm = 4” x 4”.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------

Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


77% Alpaca, 23% Silk
from 3.35 $ /25g
DROPS Brushed Alpaca Silk uni colour DROPS Brushed Alpaca Silk uni colour 3.35 $ /25g
Wool Warehouse Direct Ltd
Order
needles DROPS Needles & Hooks
You can get the yarn to make this pattern from 30.15$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

STRAND TIP:
When working with 2 strands, use the strand from both the inside and outside of the ball.

STOCKINETTE STITCH:
Knit 1 row from the right side. Purl 1 row from the wrong side. Repeat these 2 rows.

PATTERN:
See diagrams A.1 and A.2. The diagrams show the colors you will use.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JACKET – SHORT OVERVIEW OF THE PIECE:
The piece is worked in sections, back and forth and bottom up, then sewn together. The whole jacket is worked with 2 strands.

BACK PIECE:
Cast on 52-56-60-66-70-78 stitches with circular needle size 8 MM = US 11 and 2 strands of color off white DROPS Brushed Alpaca Silk – read STRAND TIP.
Purl 1 row from the wrong side. Change to 2 strands of color denim blue and work stripes according to A.1 in STOCKINETTE STITCH – read description above.
REMEMBER THE KNITTING GAUGE!
When A.1 has been completed in height work stripes in stockinette stitch according to A.2. Repeat A.2 in height. When the piece measures approx. 49-51-53-55-57-59 cm = 19 1/4"-20"-21"-21 5/8"-22 1/2"-23 1/4" (finish after a complete stripe in color off white) work 2 rows of stockinette stitch with 2 strands of color red. Bind off with knit from the right side. The piece measures approx. 50-52-54-56-58-60 cm = 19 3/4"-20 1/2"-21 1/4"-22"-22 3/4"-23 5/8".

LEFT FRONT PIECE:
Cast on 31-33-35-38-40-44 stitches with circular needle size 8 MM = US 11 and 2 strands of color off white DROPS Brushed Alpaca Silk.
Purl 1 row from the wrong side. Change to 2 strands of color denim blue and work stripes in stockinette stitch according to A.1.
When A.1 has been completed in height work stripes in stockinette stitch according to A.2. Repeat A.2 in height. When the piece measures approx. 28-28-28-29-30-31 cm = 11"-11"-11"-11 3/8"-11 3/4"-12 1/4", decrease for the V-neck on the next row from the right side as follows:
Knit until there are 7 stitches left, knit 2 together (1 stitch decreased) and knit the last 5 stitches.
Decrease like this every 6th row a total of 2-2-3-3-3-3 times, then every 4th row 6-6-5-6-6-6 times = 23-25-27-29-31-35 stitches.
When the piece measures approx. 49-51-53-55-57-59 cm = 19 1/4"-20"-21"-21 5/8"-22 1/2"-23 1/4" (finish after a complete stripe in color off white) continue with 2 strands of color red as follows:
Knit 4-5-5-6-6-7, * knit 2 together, knit 4-4-5-5-6-7 *, work from *-* 2 more times, knit 1-2-1-2-1-1 = 20-22-24-26-28-32 stitches. Purl 1 row from the wrong side.
Bind off with knit from the right side.

RIGHT FRONT PIECE:
Cast on 31-33-35-38-40-44 stitches with circular needle size 8 MM = US 11 and 2 strands of color off white.
Purl 1 row from the wrong side. Knit 1 row from the right side (this extra row keeps the change of strands at the side rather than mid-front).
Change to 2 strands of color denim blue and work stripes in stockinette stitch according to A.1.
When A.1 has been completed in height work stripes in stockinette stitch according to A.2. Repeat A.2 in height. When the piece measures approx. 28-28-28-29-30-31 cm = 11"-11"-11"-11 3/8"-11 3/4"-12 1/4", decrease for the V-neck on the next row from the right side as follows:
Knit 5, slip 1 stitch onto the right needle as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (1 stitch decreased), knit to the end of the row.
Decrease like this every 6th row a total of 2-2-3-3-3-3 times, then every 4th row 6-6-5-6-6-6 times = 23-25-27-29-31-35 stitches.
When the piece measures approx. 49-51-53-55-57-59 cm = 19 1/4"-20"-21"-21 5/8"-22 1/2"-23 1/4" (finish after a complete stripe in color off white) continue with 2 strands of color red as follows:
Knit 4-5-5-6-6-7, * knit 2 together, knit 4-4-5-5-6-7 *, work from *-* 2 more times, knit 1-2-1-2-1-1 = 20-22-24-26-28-32 stitches. Purl 1 row from the wrong side.
Bind off with knit from the right side.

SLEEVES:
Cast on 46-48-50-54-56-58 stitches with circular needle size 8 MM = US 11 and 2 strands of color off white.
Purl 1 row from the wrong side. Change to 2 strands of color denim blue. Work 2 rows of stockinette stitch.
Now work stripes in stockinette stitch according to A.2. Repeat A.2 in height.
When the piece measures 45-44-43-41-40-38 cm = 17 3/4"-17 1/4"-17"-16 1/8"-15 3/4"-15" (finish after a complete stripe in color off white) work 2 rows of stockinette stitch with 2 strands of color red.
Bind off with knit from the right side.
Work 1 more sleeve in the same way.

ASSEMBLY:
Using 1 strand of color red, sew the shoulder seams from the armhole towards the neck, leaving the middle 11-11-11-13-13-13 cm = 4 3/8"-4 3/8"-4 3/8"-5 1/8"-5 1/8"-5 1/8" on the back piece open for the neck.
Insert 1 marker on each of the front and back pieces 19-20-21-22-23-24 cm = 7 1/2"-8"-8 1/4"-8 3/4"-9"-9 1/2" down from the shoulder seam. Using 1 strand of color red, sew the sleeves into the body, between the 2 markers and the middle of the sleeve matching the shoulder seam.
Sew the sleeve and side seams in one go, using 1 strand of color off white and sewing in the outermost loop of the outermost stitch.

Diagram

All measurements in charts are in cm.

symbols = 2 strands off white
symbols = 2 strands denim blue
symbols = 2 strands pink sand
symbols = 2 strands light sea green
symbols = 2 strands curry
symbols = 2 strands cerise
symbols = 2 strands red
diagram
diagram

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 231-1) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

signature-image signature

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (33)

country flag Kaja wrote:

Hei, har strikka denne og nå kommet til monteringen. Men jeg skjønner ikke hvordan jeg skal gjøre det med monteringen hvis det skal være et mellomrom mellom forstykkene i halsen. Begge forstykkene er jo større en bakstykket til sammen.

08.11.2022 - 18:32

DROPS Design answered:

Hei Kaja. Har du husket å felle av masker til V-hals på forstykkene? På bakstykket har du 52-56-60-66-70-78 masker. På hver av forstykkene, etter fellingene til V-hals har du 20-22-24-26-28-32 masker. Så i f.eks str S har du 52 masker på bakstykket og 40 masker tilsammen på forstykkene. Du får da et "mellomrom" mellom hvert forstykke på 12 masker (disse 12 maskene er da på bakstykket / blir bak halsen når jakkes tas på). mvh DROPS Design

14.11.2022 kl. 09:55

country flag Eileen wrote:

Hei. Jeg vil gjerne kjøpe garn til denne jakken. Jeg vil strikke den i en farge. Brushed Alpaca Silk 05 beige. Klarer ikke å finne ut hvor mange nøster jeg vil trenge til str S. Kan dere hjelpe?

07.09.2022 - 10:04

DROPS Design answered:

Hej Eileen, så skal du nok bruge omkring 175 g - God fornøjelse!

07.09.2022 kl. 15:10

country flag Marloes wrote:

Ik zie in de beschrijving dat er van de kleuren denimblauw en zeegroen (op de foto lichtblauw) dubbel zoveel garen nodig is, maar als ik de beschrijving lees en de strepen op de foto tel dan wordt er van alle kleuren evenveel gebruikt en van naturel/wit ruim 5 x zoveel, terwijl hier 4 x zoveel garen voor staat. Klopt dit wel? Ik wil het patroon in katoen (Paris of Loves you 8) gaan breien, dus dan heb ik van alle kleuren 4 x zoveel bollen nodig en ik wil niet teveel of te weinig bestellen

27.03.2022 - 19:59

DROPS Design answered:

Dag Marloes,

Dit kan door de afronding komen; van wit kan je alle bollen op breien en van de andere kleuren zal je wellicht wat over houden bij elke kleur. En ook een beetje door waar de strepen precies komen, bijvoorbeeld boven of onder het armsgat waardoor de streep respectievelijk breder of smaller is. Daarnaast heeft bijvoorbeeld denimblauw op het lijf weer meer strepen dan zeegroen.

29.03.2022 kl. 09:44

country flag Joke Van Den Berg wrote:

Kan je de mouwinzet ook veranderen, ik vind die \"afhangende\" mouwen totaal niet mooi én past ook niet bij me\r\nMet de vraag: hoe los ik dit op ?\r\nAlvast dank je wel voor antwoord p mijn vraag, \r\nJoke.

20.03.2022 - 11:14

DROPS Design answered:

Dag Joke,

Helaas is het voor ons niet mogelijk om patronen aan te passen naar persoonlijke wensen. Het beste zou je dan een ander patroon kunnen zoeken met hetzelfde garen/ stekenverhouding, waarin je de strepen van dit patroon toepast.

21.03.2022 kl. 07:16

country flag Sylviane wrote:

Ce modèle est très joli en photo mais les couleurs de la laine ne rendent pas du tout le même effet : le modèle en photo est très lumineux alors que les couleurs sont en réalité très fades ... dommage

18.03.2022 - 13:52

country flag Anne wrote:

Undrer mig over, at man ikke stikker ryg og forstykker på een pind indtil ærmegabet og skiller det her. Det ville give flottere striber i siderne og iøvrigt er det meget lettere at strikke med alle de striber (meget færre tråde der skal syes ind til sidst) og endelig slipper man for sammensyning i siderne?

14.03.2022 - 10:44

DROPS Design answered:

Hej Anne, det må du gerne :)

15.03.2022 kl. 15:26

country flag Sandra wrote:

Hej! Hur mycket garn går det åt för att sticka den enfärgad i storlek M?

13.03.2022 - 08:00

DROPS Design answered:

Hei Sandra. Det har vi ikke den nøyaktige garnmengde på, men tipper 200-225 gram. mvh DROPS Design

14.03.2022 kl. 14:24

country flag Carine wrote:

Bonjour, pourquoi terminer avec 2 rangs de rouge, qui est trop près du rang rouge précédent? Si je termine les manches avec le même coloris, ça ne devrait pas poser de problème pour les finitions ? Merci pour votre réponse

06.03.2022 - 16:50

DROPS Design answered:

Bonjour Carine, c'est un choix de la styliste, pour que les épaules et les manches se terminent toutes par du rouge, vous pouvez volontiers ajuster la couleurs si vous préférez. Bon tricot!

07.03.2022 kl. 09:13

country flag SYLVIANE wrote:

Peut-on tricoter ce modèle avec des aiguilles droites en 8 au lieu des aiguilles circulaires ? merci d'avance

05.03.2022 - 23:12

DROPS Design answered:

Bonjour, Vous pouvez lire la leçon suivante pour adapter le patron aux aiguilles droites :https://www.garnstudio.com/lesson.php?id=13&cid=8

06.03.2022 kl. 14:04

country flag Edith wrote:

Is er echt maar 225 gram nodig voor dit vest (maat M)? Het lijkt me zo weinig … Graag uw spoedige reactie, want ik zit te popelen om het garen te bestellen en te beginnen met breien 🤗

14.02.2022 - 20:21

DROPS Design answered:

Dag Edith,

Ja, dat kopt hoor. Brushed Alpaca Silk is heel licht en dus heb je per gram meer looplengte in verhouding tot andere garens.

17.02.2022 kl. 11:05

Post a comment to pattern DROPS 231-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.