River Hill by DROPS Design

Knitted wrap-around jacket in DROPS Melody. Sizes S - XXXL.

DROPS 228-21
DROPS Design: Pattern no ml-073
Yarn group D
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS MELODY from Garnstudio (belongs to yarn group D)
250-300-300-350-400-400 g colour 03, pearl grey

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 7 MM: Length 80 cm.
DROPS CIRCULAR NEEDLE SIZE 5.5 MM: Length 80 cm.

KNITTING TENSION:
13 stitches in width and 15 rows in height with stocking stitch = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

-------------------------------------------------------

Knitting tension – See how to measure it and why here
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------


71% Alpaca, 25% Wool, 4% Polyamide
from 4.10 £ /50g
DROPS Melody uni colour DROPS Melody uni colour 4.10 £ /50g
Wool Warehouse Direct Ltd
Order
needles DROPS Needles & Hooks Order
You can get the yarn to make this pattern from 20.50£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge = knit 2 rows.

DECREASE TIP (evenly spaced):
To work out how to decrease evenly, count the total number of stitches on the needle (e.g. 72 stitches) minus the edge stitches (e.g. 2 stitches) and divide the remaining stitches by the number of decreases to be made (e.g. 10) = 7. 
In this example decrease by knitting together each 6th and 7th stitch.

INCREASE TIP (for sides and sleeves):
Increase 1 stitch by making 1 yarn over. On the next row work the yarn overs twisted to avoid holes. The new stitches are worked in stocking stitch.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JACKET – SHORT OVERVIEW OF THE PIECE:
The front and back pieces are worked separately, back and forth with circular needle and bottom up. The sleeves are worked back and forth with circular needle, bottom up. The pieces are sewn together. Then 2 ties are worked and sewn on to finish.

BACK PIECE:
Cast on 72-80-84-92-104-112 stitches (including 1 edge stitch on each side) with circular needle size 5.5 mm and DROPS Melody. Purl 1 row from the wrong side.
Then work rib from the right side as follows: 1 edge stitch in GARTER STITCH – read description above, * purl 2, knit 2 *, work from *-* until there are 3 stitches left, purl 2 and 1 edge stitch in garter stitch.
Continue this rib for 4 cm.
Knit 1 row from the right side where you decrease 10-12-12-12-16-18 stitches evenly spaced – read DECREASE TIP = 62-68-72-80-88-94 stitches.
Change to circular needle size 7 mm.
Purl 1 row (edge stitches are knitted).
Continue with stocking stitch and 1 edge stitch in garter stitch on each side. REMEMBER THE KNITTING TENSION!
When the piece measures 16-17-18-19-20-21 cm, increase 1 stitch on each side by making 1 yarn over inside each edge stitch – read INCREASE TIP = 64-70-74-82-90-96 stitches.
When the piece measures 32-33-34-35-36-37 cm, cast off for the armholes at the beginning of each row as follows: 3-4-4-5-6-7 stitches 1 time, 2 stitches 1-1-1-2-3-3 times and 1 stitch 1-2-2-2-2-2 times on each side = 52-54-58-60-62-66 stitches.
Continue with stocking stitch and 1 edge stitch in garter stitch on each side. When the piece measures 49-51-53-55-57-59 cm, work rib over the middle 22-22-22-26-26-26 stitches as follows: Work the first 15-16-18-17-18-20 stitches as before, * purl 2, knit 2 *, work from *-* over the next 20-20-20-24-24-24 stitches, purl 2 and work the last 15-16-18-17-18-20 stitches as before. Continue this pattern until the piece measures 52-54-56-58-60-62 cm. Now cast off the middle 14-14-14-18-18-18 stitches for the neck and finish each shoulder separately = 19-20-22-21-22-24 stitches on each shoulder. Continue pattern as before, i.e work 2 knit stitches towards the neck and 2 purl stitches inside these stitches, the remaining stitches are worked in stocking stitch (seen from the right side).
When the piece measures 54-56-58-60-62-64 cm, cast off with knit over knit, purl over purl and garter stitch over garter stitch. Work the other shoulder in the same way.

RIGHT FRONT PIECE:
Cast on 57-61-65-73-81-85 stitches (including 1 edge stitch and 6 stitches for the rolled-edge) with circular needle size 5.5 mm and DROPS Melody. Purl 1 row from the wrong side.
Then work rib from the right side as follows: Purl 6 (= rolled-edge, purled from the right side and knitted from the wrong side), * knit 2, purl 2 *, work from *-* until there are 3 stitches left, knit 2 and 1 edge stitch in garter stitch. Continue this rib for 4 cm.
The next row is worked as follows from the right side: Purl 6, knit 50-54-58-66-74-78 and decrease 7-6-7-8-10-10 stitches evenly over these stitches – remember DECREASE TIP, 1 edge stitch in garter stitch = 50-55-58-65-71-75 stitches.
Change to circular needle size 7 mm.
Purl 1 row (edge stitch and the 6 rolled-edge stitches are knitted).
Continue with stocking stitch, the 6 rolled-edge stitches and the 1 edge stitch in the side as before.

OVERVIEW OF THE NEXT SECTION:
You now decrease for the wrap-around at the same time as increasing in the side and casting off for the armhole – therefore, read the next section before continuing.

WRAP-AROUND:
When the piece measures 10-10-10-9-8-8 cm, start to decrease for the wrap-around. Decrease inside the 6 purled stitches (= rolled-edge) by slipping 1 stitch as if to knit, knitting 1 and passing the slipped stitch over the knitted stitch (= 1 stitch decreased). Decrease like this every 4th row 1-1-1-1-1-2 times, every 2nd row 22-24-25-30-32-32 times and every 4th row 1-1-1-1-1-1 time (= 24-26-27-32-34-35 stitches decreased).
INCREASE IN THE SIDE:
When the piece measures 16-17-18-19-20-21 cm, increase 1 stitch in the side by making 1 yarn over inside the edge stitch – remember INCREASE TIP.
ARMHOLE:
When the piece measures 32-33-34-35-36-37 cm, cast off for the armhole at the beginning of each row from the side as follows: 3-4-4-5-6-7 stitches 1 time, 2 stitches 1-1-1-2-3-3 times and 1 stitch 1-2-2-2-2-2 times (= 6-8-8-11-14-15 stitches cast off).

When all the decreases for the wrap-around and the armhole are finished there are 21-22-24-23-24-26 stitches on the shoulder. There are 2 more stitches on the front shoulder than on the back; these are sewn into the shoulder seams later so the rolled-edge stays rolled from the shoulder down. Continue working until the piece measures 54-56-58-60-62-64 cm. Cast off with knit over knit and purl over purl.

LEFT FRONT PIECE:
Cast on 57-61-65-73-81-85 stitches (including 1 edge stitch and 6 stitches for the rolled-edge) with circular needle size 5.5 mm and DROPS Melody. Purl 1 row from the wrong side.
Then work rib from the right side as follows: 1 edge stitch in garter stitch, * knit 2, purl 2 *, work from *-* until there are 8 stitches, knit 2 and purl 6 (= rolled-edge, purled from the right side and knitted from the wrong side). Continue this rib for 4 cm.
The next row is worked as follows from the right side: 1 edge stitch in garter stitch, knit 50-54-58-66-74-78 and decrease 7-6-7-8-10-10 stitches evenly over these stitches, purl 6 = 50-55-58-65-71-75 stitches.
Change to circular needle size 7 mm.
Purl 1 row (edge stitch and the 6 rolled-edge stitches are knitted).
Continue with stocking stitch, the 6 rolled-edge stitches and 1 edge stitch in the side worked as before.

OVERVIEW OF THE NEXT SECTION:
You now decrease for the wrap-around at the same time as increasing in the side and casting off for the armhole – therefore read the next section before continuing.

WRAP-AROUND:
When the piece measures 10-10-10-9-8-8 cm, start to decrease for the wrap-around. Decrease inside the 6 purled stitches (= rolled-edge) by knitting 2 together (= 1 stitch decreased). Decrease like this every 4th row 1-1-1-1-1-2 times, every 2nd row 22-24-25-30-32-32 times and every 4th row 1-1-1-1-1-1 time (= 24-26-27-32-34-35 stitches decreased).
INCREASE IN THE SIDE:
When the piece measures 16-17-18-19-20-21 cm, increase 1 stitch in the side by making 1 yarn over inside the 1 edge stitch.
ARMHOLE:
When the piece measures 32-33-34-35-36-37 cm, cast off for the armhole at the beginning of each row from the side as follows: 3-4-4-5-6-7 stitches 1 time, 2 stitches 1-1-1-2-3-3 times and 1 stitch 1-2-2-2-2-2 times (= 6-8-8-11-14-15 stitches cast off).

When all the decreases for the wrap-around and the armhole are finished there are 21-22-24-23-24-26 stitches on the shoulder. There are 2 more stitches on the front shoulder than on the back; these are sewn into the shoulder seams later, so the rolled-edge stays rolled from the shoulder down. Continue working until the piece measures 54-56-58-60-62-64 cm. Cast off with knit over knit and purl over purl.

SLEEVES:
Cast on 42-46-46-50-50-54 stitches (including 1 edge stitch on each side) with circular needle size 5.5 mm and DROPS Melody. Purl 1 row from the wrong side. Then work rib from the right side as follows: 1 edge stitch in garter stitch, * knit 2, purl 2 *, work from *-* until there is 1 stitch left, 1 edge stitch in garter stitch.
Continue this rib for 4 cm.
Knit 1 row from the right side where you decrease 0-3-3-5-3-6 stitches evenly spaced = 42-43-43-45-47-48 stitches.
Change to circular needle size 7 mm. Purl 1 row (edge stitches knitted).
Continue with stocking stitch and 1 edge stitch in garter stitch on each side.
When the sleeve measures 26-21-21-21-18-18 cm, increase 1 stitch inside both edge stitches – remember INCREASE TIP. Increase like this every 3-3-2-2-2-1½ cm a total of 6-7-9-9-10-11 times = 54-57-61-63-67-70 stitches. Continue working until the sleeve measures 44-42-41-40-38-36 cm (shorter measurements in larger sizes due to wider shoulders and longer sleeve cap).
Now work stocking stitch back and forth for the sleeve cap, casting off at the beginning of each row as follows: 3-4-4-5-6-7 stitches 1 time, 1 stitch 0-0-0-2-4-6 times, 2 stitches 0-3-2-4-3-2 times and 3 stitches 3-1-2-0-0-0 times on both sides = 30-31-33-33-35-36 stitches. Cast off. The sleeve measures approx. 49-49-48-49-49-48 cm.
Work the other sleeve in the same way.

ASSEMBLY:
Sew the shoulder seams as follows: Fold the 2 extra stitches on the front pieces to the right side (leaving 2 purled stitches before the stocking stitch begins on the front piece). Sew the shoulder seams inside the cast-off edge – making sure the 2 folded stitches are sewn into the shoulder seam.
Sew the sleeves to the body, inside the cast-off edge on the sleeve and the 1 edge stitch on the body. Sew the side seams inside the edge stitch from the armholes down, leaving an opening of approx. 3 cm for the tie on the right side, 10 cm up from the bottom edge.

TIES:
Cast on 6 stitches with needle size 5.5 mm and DROPS Melody. Work stocking stitch back and forth for 120 to 150 cm – or to desired length. The tie will roll. Cast off.
Work the other tie in the same way.
Fasten each tie to the wrong side on the front pieces, in the transition from the rolled-edge, 10 cm up from the bottom edge.

Diagram

diagram measurements

Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 228-21) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

signature-image signature

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

Each of our patterns has specific tutorial videos to help you.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (6)

country flag Mund wrote:

"Wie zuvor über die ersten 15-16-18-17-18-20 Maschen stricken, * 2 Maschen links, 2 Maschen rechts *, von *-* über die nächsten 20-20-20-24-24-24 Maschen stricken, 2 Maschen links, wie zuvor über die letzten 15-16-18-17-18-20 Maschen stricken. " Kann mir bitte dies einer erklären? Ich verstehe nicht was das *-* bedeutet und wie ich das stricken soll. Wie soll das aussehen? Hinten Rückenteil Kragen verzweifelte Grüße soraya

06.11.2021 - 08:47

DROPS Design answered:

Liebe Soraya, *-* bezeichnet die Wiederholung, die gestrickt werden soll. Beispiel: für die kleinste Größe werden 20 Maschen benötigt. Diese sollen durch Wiederholung von 2x Links und 2x Rechts gestrickt werden - also 5 Wiederholungen. Viel Spaß beim Stricken!

06.11.2021 kl. 19:08

country flag Susanne Vollmer wrote:

I love this cosy wrap, cannot wait to start.

24.08.2021 - 17:21

country flag Maria wrote:

Cuddly hug

10.08.2021 - 01:23

country flag Sara wrote:

Wow

05.08.2021 - 08:08

country flag Kjersti L Johnsen wrote:

Soft wrap sweater

04.08.2021 - 09:28

country flag Patricia Thibert wrote:

Matin cocooning

03.08.2021 - 17:19

Post a comment to pattern DROPS 228-21

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.