DROPS Super Sale - SAVE 30% on 5 soft merino yarns!

How to knit a sock with a gusset heel (basic method)

Video thumbnail for How to knit a sock with a gusset heel (basic method)
In this DROPS video we show how to knit a gusset heel on a sock following a basic method.

Knit the heel sts in the back in stockinette st back and forth on needles for 5-6 cm/2-2½ inches.
Start dec on next row from RS. Knit row until in pattern mentioned numbers of sts remain, K2 tog into back of loop, turn piece.
Knit WS row until in pattern mentioned numbers of sts remain, P2 tog, turn piece.
Continue back and forth dec like this with 1 less st remaining each time before working 2 sts tog.
After heel dec pick up in pattern mentioned numbers of sts on each side of heel and continue in stockinette st in the round on all needles again.

You must read the pattern to be able to follow. You’ll find patterns using this technique by clicking on the pictures below.

Patterns using this technique

DROPS 167-32

DROPS 167-32
DROPS Baby 45-23

DROPS Baby 45-23
DROPS 251-15

DROPS 251-15
DROPS 251-16

DROPS 251-16
DROPS Children 48-19

DROPS Children 48-19
Change language:

Video #69, listed in: Learn to knit, Socks and Slippers, Heels, Knitting patterns

Our videos do not have sound. We are a worldwide company and our videos are watched by people speaking endless of different languages and many do not understand English. So since there is not a given language for us to use, we instead have written instructions to accompany the video, and then there is no sound to disturb while watching.

You can adjust the speed of this video by clicking on the icon, on the play bar.

Country flag Maria Da Luz Sousa Neto Filipe wrote:

Gostei imenso está muito bem explicado ,apenas gostava de saber como termina a meia .Um bem haja e obrigada

13.04.2016 - 20:37

Country flag Rocio Patiño wrote:

Hola Gran idea el tutorial pero no lo puedo ver, a que se debe? como podría solucionar gracias.

20.11.2015 - 19:25

DROPS Design :

No sabría decirte, Rocío. El tutorial se abre perfectamente en mi ordenador. ¿Puede ser que te falte algún programa que lo abra o tengas algo que lo bloquee?

21.11.2015 - 18:43

Country flag Ans Peters wrote:

Zie ik het goed en heb je voor deze hiel 5 naalden nodig?

02.03.2015 - 02:15

DROPS Design :

Hoi Ans. Ja, je breit de sokken in de rondte op 4 naalden (en breit met de 5e nld). Je kan ook kiezen voor 3 naalden (en breien met een 4e nld) of een kleine rondbreinaald als je dat prettiger vindt. Dit is een voorbeeld - jij kan altijd kiezen wat jij prettiger vindt.

02.03.2015 - 14:10

Country flag Barbara wrote:

Bonjour, Une fois que j'ai terminé les diminutions du talon et que je relève les mailles pour continuer à tricoter en rond, je me retrouve avec un trou de chaque côté et en plus, cela fait une pointe de chaque côté du talon. Qu'est ce que je fais avec cela? Merci..

03.03.2014 - 14:26

DROPS Design :

Bonjour Barbara, pour éviter un trou à la transition entre le talon et le dessus du pied, vous pouvez relever 1 m supplémentaire et la tricoter torse avec la m suiv. Pour toute aide complémentaire, n'hésitez pas à vous adresser à votre détaillant ou au forum DROPS (Menu "Astuce & aide / Sites recommandés) où vous trouverez aussi différents tutos en photos. Bon tricot!

04.03.2014 - 10:26

Country flag Vicky wrote:

ESTE VIDEO ES DEMASIADO RAPIDO Y CORTO NO SE PUEDE COMPRENDER ADEMAS QUE LA CANTIDAD DE LOS PUNTOS DEL TALON NO REALES ME GUSTARIA ENCONTRAR UN VIDEO MAS ESPLECATIVO SI ES POSIBLE GRACIAS

18.10.2013 - 11:45

Country flag Ann Olssoneli wrote:

JA, men då gjorde jag ju rätt..suck..skulle inte repat upp..

28.09.2013 - 16:57

Ingrid Marianne Baecker wrote:

Muito obrigada por ensinar a fazer o calcanhar da meia desta forma. Agoro poderei tricotá-las também. Eu moro no sul do Brasil. Abraços. Ingrid

07.03.2013 - 19:01

Country flag Karin B wrote:

Fattar tror jag mä

19.02.2013 - 18:38

Country flag Carina Bernau wrote:

Jättebra! Förstår nog inte riktig ändå? Hur vet jag när jag ska sticka 2 m tillsammans? Och hur många m ska vara kvar när hälen är klar?

06.02.2013 - 15:04

Country flag Linda wrote:

Fijn dat dit filmpje er is, nu begrijp ik dat de losse flap in de hiel geen fout is maar zo hoort.

17.11.2012 - 11:51

Leave a comment or question to this video

Your email address will not be published. Required fields are marked *.

You might also like

Video thumbnail for How to work a sock with a diamond heel
4:36
How to work a sock with a diamond heel

In this DROPS video we give you a short overview of how to work a sock with a diamond heel. All stitches remain on the needles while knitting the heel. To make the heel, follow these steps: 1. Knit in the round, gradually increasing stitches at the back of the sock until the desired width and length of the heel have been achieved. 2. Decrease the heel stitches while continuing to knit in the round. 3. Continue knitting towards the toe. 4. The combination of increases and decreases forms a diamond-shaped section at the back of the sock, which is why this type of heel is called a diamond heel.
Video thumbnail for How to knit a sock with a square heel
2:44
How to knit a sock with a square heel

In this DROPS video, we show you how to knit a sock with a square heel. The stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows (the heel extends under the foot): 1) The heel is worked back and forth across the heel-stitches to achieve the correct height. For this type of heel, the length reaches midway under the heel. 2) Next, the heel is knitted together beneath the foot. 3) The sock is then continued in the round, with stitches picked up along both sides of the heel length, working towards the toe. 4) This heel creates a square shape, which is why this type of heel is known as a square heel.
Video thumbnail for How to knit a sock with a gusset heel – short overview
4:54
How to knit a sock with a gusset heel – short overview

In this DROPS video, we show you how to knit a sock with a gusset heel - arguably the most common method for working a heel. To begin, the stitches on top of the foot are placed on a thread, while the stitches at the back are kept on the needles and the heel is worked as follows: 1) The heel is first worked in height, back and forth across the heel-stitches. 2) Next, the bottom of the heel is worked to the required width and length by working short rows and decreasing stitches. 3) Once this step is completed, continue knitting in the round across all stitches, knitting up stitches on both sides of the heel (along the length). 4) The width and shape of the foot is worked by decreasing stitches on both sides, forming a small gusset heel – that is why this type of heel is known as a gusset heel.
Video thumbnail for How to work an angular heel
22:56
How to work an angular heel

In this DROPS video we show how to work a angular heel on a sock. We have already worked the beginning and start the video by cutting the thread and divides the stitches to the heel and the top of the foot. Work the angular heel with increases and decreases as explained in the pattern you are working after. We are using the yarn DROPS Snow in the video. You must read a pattern with angular heel to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
Video thumbnail for How to knit an old-fashioned heel on a sock
15:29
How to knit an old-fashioned heel on a sock

In this DROPS video we show you how to knit an old-fashioned hell on the socks in DROPS 189-36. We have already knitted the leg and putted the 20 top of foot stitches on a stitch holder (we knit size 35/37). Continue by working stocking stitch back and forth over the heel stitches; on the first row from the right side increase stitches for a better fit as follows: Knit 9 stitches, increase 1 stitch, * knit 2 stitches, increase 1 stitch *, work from *-* a total of 3 times and then knit to end of row = 28 stitches on needle. Continue back and forth with stocking stitch to the measurement written in the pattern and insert 1 marker in middle of row. On the next row from the right side work as follows: Knit 10 stitches, knit together the next 8 stitches 2 and 2, knit the last 10 stitches. Turn and purl back. Knit 1 row from the right side. Now work back and forth from the wrong side to work the heel stitches together. All rows are worked from the wrong side. Turn and purl the first 12 stitches from the wrong side. Make sure that the strand is at the back of the piece and work as follows: LEFT NEEDLE: Knit 2 stitches twisted together, move the knitted-together stitches back onto the left needle and tighten the strand. Do not turn the piece. RIGHT NEEDLE: Insert the left needle into the 2 next stitches on the right needle and pick up the strand and take it around the left needle, then pull the strand through these 2 stitches and drop the 2 stitches from the right needle. Then move the knitted-together stitches back onto the right needle and tighten the strand. Do not turn the piece. Repeat LEFT and RIGHT NEEDLE like this until there are 2 stitches left. Now the heel stitches have been worked together. Place the 2 remaining stitches on the right needle and turn the piece to the right side. These socks are knitted in DROPS Karisma, but in the video we work with a thicker yarn; DROPS Snow. You must read the pattern be able to follow this video properly. You’ll find the pattern by clicking on the picture below.
Video thumbnail for How to knit with 2 threads to get a stronger heel - knitting tip
5:46
How to knit with 2 threads to get a stronger heel - knitting tip

In this DROPS video we show how to get a stronger heel on a sock by knitting with 2 threads. Use strand inside and outside of ball (or use 2 balls) and work 1 stitch alternately with one and the other strand. This way you get a thicker heel without working with double strand. In the video, we already have knitted the rib and put the stitches mid on top of foot on a stitch holder and we show 2 rows where we knit with 2 strands. These socks are knitted in DROPS Karisma, but in video we use a thicker yarn; DROPS Snow. You must read the pattern to be able to follow this video properly. You’ll find the pattern by clicking on the picture below.